I did some tests using the Encore FM 5.3. This were the last device using the legacy IR support on saa7134. After it, only one device (Nebula Electronics DigiTV) still uses it. It is an old device, so, it will probably not be easy to find someone with such hardware. As the conversion requires to test if raw decoding work with bttv (e. g. if the hardware works properly generating IRQ's on both GPIO transitions), we need someone with this hardware, or with another hardware that connects an IRQ directly into a bttv GPIO pin capable of generating IRQ's. While we don't have it, let's just move the legacy code to bttv driver. Mauro Carvalho Chehab (3): [media] saa7134: use rc-core raw decoders for Encore FM 5.3 [media] saa7134: Remove legacy IR decoding logic inside the module [media] rc: Remove ir-common module drivers/media/rc/Kconfig | 5 - drivers/media/rc/Makefile | 2 - drivers/media/rc/ir-functions.c | 120 -------------- drivers/media/video/bt8xx/Kconfig | 2 +- drivers/media/video/bt8xx/bttv-input.c | 103 ++++++++++++- drivers/media/video/saa7134/Kconfig | 2 +- drivers/media/video/saa7134/saa7134-input.c | 226 +-------------------------- drivers/media/video/saa7134/saa7134.h | 2 +- 8 files changed, 107 insertions(+), 355 deletions(-) delete mode 100644 drivers/media/rc/ir-functions.c -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
