Hi Maarten and Nicolas
Sorry, I've not got much time to look at these patches at present.
On Mon, 4 Mar 2024 at 18:10, Nicolas Dufresne <nicolas@xxxxxxxxxxxx> wrote:
>
> Hi,
>
> Le dimanche 03 mars 2024 à 16:09 +0100, Maarten Vanraes a écrit :
> > From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
> >
> > Some of the Broadcom codec blocks use a column based YUV4:2:0 image
> > format, so add the documentation and defines for both 8 and 10 bit
> > versions.
TBH Whilst some of the firmware components do support the column
format, this has limited gain in this series.
It will be needed for the HEVC stateless decoder as and when that gets
upstreamed.
> > Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
> > Signed-off-by: Maarten Vanraes <maarten@xxxxxxxx>
> > ---
> > .../media/v4l/pixfmt-nv12-col128.rst | 215 ++++++++++++++++++
> > .../media/v4l/pixfmt-yuv-planar.rst | 12 +
> > .../userspace-api/media/v4l/yuv-formats.rst | 19 ++
> > drivers/media/v4l2-core/v4l2-ioctl.c | 2 +
> > include/uapi/linux/videodev2.h | 4 +
> > 5 files changed, 252 insertions(+)
> > create mode 100644 Documentation/userspace-api/media/v4l/pixfmt-nv12-col128.rst
> >
> > diff --git a/Documentation/userspace-api/media/v4l/pixfmt-nv12-col128.rst b/Documentation/userspace-api/media/v4l/pixfmt-nv12-col128.rst
> > new file mode 100644
> > index 000000000000..196ca33a5dff
> > --- /dev/null
> > +++ b/Documentation/userspace-api/media/v4l/pixfmt-nv12-col128.rst
> > @@ -0,0 +1,215 @@
> > +.. Permission is granted to copy, distribute and/or modify this
> > +.. document under the terms of the GNU Free Documentation License,
> > +.. Version 1.1 or any later version published by the Free Software
> > +.. Foundation, with no Invariant Sections, no Front-Cover Texts
> > +.. and no Back-Cover Texts. A copy of the license is included at
> > +.. Documentation/media/uapi/fdl-appendix.rst.
> > +..
> > +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
> > +
> > +.. _V4L2_PIX_FMT_NV12_COL128:
> > +.. _V4L2_PIX_FMT_NV12_10_COL128:
> > +
> > +********************************************************************************
> > +V4L2_PIX_FMT_NV12_COL128, V4L2_PIX_FMT_NV12_10_COL128
> > +********************************************************************************
> > +
> > +
> > +V4L2_PIX_FMT_NV21_COL128
> > +Formats with ½ horizontal and vertical chroma resolution. This format
> > +has two planes - one for luminance and one for chrominance. Chroma
> > +samples are interleaved. The difference to ``V4L2_PIX_FMT_NV12`` is the
> > +memory layout. The image is split into columns of 128 bytes wide rather than
> > +being in raster order.
> > +
> > +V4L2_PIX_FMT_NV12_10_COL128
> > +Follows the same pattern as ``V4L2_PIX_FMT_NV21_COL128`` with 128 byte, but is
> > +a 10bit format with 3 10-bit samples being packed into 4 bytes. Each 128 byte
> > +wide column therefore contains 96 samples.
>
> Might be worth saying which side the padding goes. Xilinx uses a non-tiled
> version of this, but depending were the padding is placed (LSB or MSB) it may
> not actually be the same format.
It's documented later in this page
+ * - Y'\ :sub:`00[7:0]`
+ - Y'\ :sub:`01[5:0] (bits 7--2)` Y'\ :sub:`00[9:8]`\ (bits 1--0)
+ - Y'\ :sub:`02[3:0] (bits 7--4)` Y'\ :sub:`01[9:6]`\ (bits 3--0)
+ - unused (bits 7--6)` Y'\ :sub:`02[9:4]`\ (bits 5--0)
I only see V4L2_PIX_FMT_P010 and V4L2_PIX_FMT_NV12M_10BE_8L128 in the
tree as 10bit YUV formats. Neither matches that packing.
> > +
> > +
> > +Description
> > +===========
> > +
> > +This is the two-plane versions of the YUV 4:2:0 format where data is
> > +grouped into 128 byte wide columns. The three components are separated into
> > +two sub-images or planes. The Y plane has one byte per pixel and pixels
> > +are grouped into 128 byte wide columns. The CbCr plane has the same width,
> > +in bytes, as the Y plane (and the image), but is half as tall in pixels.
> > +The chroma plane is also in 128 byte columns, reflecting 64 Cb and 64 Cr
> > +samples.
> > +
> > +The chroma samples for a column follow the luma samples. If there is any
> > +paddding, then that will be reflected via the selection API.
> > +The luma height must be a multiple of 2 lines.
> > +
> > +The normal bytesperline is effectively fixed at 128. However the format
> > +requires knowledge of the stride between columns, therefore the bytesperline
> > +value has been repurposed to denote the number of 128 byte long lines between
> > +the start of each column.
>
> I would refrain from a redefinition of bytesperline here. Specially that this
> seems to be a non-mplane definition (single allocation format). In that case,
> userspace may be forced to extrapolate some information. I'd keep it strictly to
> the definition.
>
> byteperlines = n_col * 128
> n_cols = roundup_128(width) / 128
>
> As the height returned by TRY_FMT (and S_FMT), is padded, you can always
> retrieve your tile stride (column stride in this specific case) with:
>
> tile_stride = height * 128
Each column (tile if you wish) contains both luma and chroma. Height
is the height of the luma. Chroma comes after the luma per column.
tile_stride = height * 128 does not give you where the next column
begins - it'd be the start of the chroma for the first column, and
then a useless pointer. This is why we were repurposing bytesperline
for column stride.
There may be an option if you only allow sizeimage to be set by the
driver, then I believe you could flip it around and use sizeimage /
n_cols.
Dave
> Nicolas
>
> > +
> > +**Byte Order.**
> > +
> > +
> > +.. flat-table::
> > + :header-rows: 0
> > + :stub-columns: 0
> > + :widths: 12 12 12 12 12 4 12 12 12 12
> > +
> > + * - start + 0:
> > + - Y'\ :sub:`0,0`
> > + - Y'\ :sub:`0,1`
> > + - Y'\ :sub:`0,2`
> > + - Y'\ :sub:`0,3`
> > + - ...
> > + - Y'\ :sub:`0,124`
> > + - Y'\ :sub:`0,125`
> > + - Y'\ :sub:`0,126`
> > + - Y'\ :sub:`0,127`
> > + * - start + 128:
> > + - Y'\ :sub:`1,0`
> > + - Y'\ :sub:`1,1`
> > + - Y'\ :sub:`1,2`
> > + - Y'\ :sub:`1,3`
> > + - ...
> > + - Y'\ :sub:`1,124`
> > + - Y'\ :sub:`1,125`
> > + - Y'\ :sub:`1,126`
> > + - Y'\ :sub:`1,127`
> > + * - start + 256:
> > + - Y'\ :sub:`2,0`
> > + - Y'\ :sub:`2,1`
> > + - Y'\ :sub:`2,2`
> > + - Y'\ :sub:`2,3`
> > + - ...
> > + - Y'\ :sub:`2,124`
> > + - Y'\ :sub:`2,125`
> > + - Y'\ :sub:`2,126`
> > + - Y'\ :sub:`2,127`
> > + * - ...
> > + - ...
> > + - ...
> > + - ...
> > + - ...
> > + - ...
> > + - ...
> > + - ...
> > + * - start + ((height-1) * 128):
> > + - Y'\ :sub:`height-1,0`
> > + - Y'\ :sub:`height-1,1`
> > + - Y'\ :sub:`height-1,2`
> > + - Y'\ :sub:`height-1,3`
> > + - ...
> > + - Y'\ :sub:`height-1,124`
> > + - Y'\ :sub:`height-1,125`
> > + - Y'\ :sub:`height-1,126`
> > + - Y'\ :sub:`height-1,127`
> > + * - start + ((height) * 128):
> > + - Cb\ :sub:`0,0`
> > + - Cr\ :sub:`0,0`
> > + - Cb\ :sub:`0,1`
> > + - Cr\ :sub:`0,1`
> > + - ...
> > + - Cb\ :sub:`0,62`
> > + - Cr\ :sub:`0,62`
> > + - Cb\ :sub:`0,63`
> > + - Cr\ :sub:`0,63`
> > + * - start + ((height+1) * 128):
> > + - Cb\ :sub:`1,0`
> > + - Cr\ :sub:`1,0`
> > + - Cb\ :sub:`1,1`
> > + - Cr\ :sub:`1,1`
> > + - ...
> > + - Cb\ :sub:`1,62`
> > + - Cr\ :sub:`1,62`
> > + - Cb\ :sub:`1,63`
> > + - Cr\ :sub:`1,63`
> > + * - ...
> > + - ...
> > + - ...
> > + - ...
> > + - ...
> > + - ...
> > + - ...
> > + - ...
> > + * - start + ((height+(height/2)-1) * 128):
> > + - Cb\ :sub:`(height/2)-1,0`
> > + - Cr\ :sub:`(height/2)-1,0`
> > + - Cb\ :sub:`(height/2)-1,1`
> > + - Cr\ :sub:`(height/2)-1,1`
> > + - ...
> > + - Cb\ :sub:`(height/2)-1,62`
> > + - Cr\ :sub:`(height/2)-1,62`
> > + - Cb\ :sub:`(height/2)-1,63`
> > + - Cr\ :sub:`(height/2)-1,63`
> > + * - start + (bytesperline * 128):
> > + - Y'\ :sub:`0,128`
> > + - Y'\ :sub:`0,129`
> > + - Y'\ :sub:`0,130`
> > + - Y'\ :sub:`0,131`
> > + - ...
> > + - Y'\ :sub:`0,252`
> > + - Y'\ :sub:`0,253`
> > + - Y'\ :sub:`0,254`
> > + - Y'\ :sub:`0,255`
> > + * - ...
> > + - ...
> > + - ...
> > + - ...
> > + - ...
> > + - ...
> > + - ...
> > + - ...
> > +
> > +V4L2_PIX_FMT_NV12_10_COL128 uses the same 128 byte column structure, but
> > +encodes 10-bit YUV.
> > +3 10-bit values are packed into 4 bytes as bits 9:0, 19:10, and 29:20, with
> > +bits 30 & 31 unused. For the luma plane, bits 9:0 are Y0, 19:10 are Y1, and
> > +29:20 are Y2. For the chroma plane the samples always come in pairs of Cr
> > +and Cb, so it needs to be considered 6 values packed in 8 bytes.
> > +
> > +Bit-packed representation.
> > +
> > +.. raw:: latex
> > +
> > + \small
> > +
> > +.. tabularcolumns:: |p{1.2cm}||p{1.2cm}||p{1.2cm}||p{1.2cm}|p{3.2cm}|p{3.2cm}|
> > +
> > +.. flat-table::
> > + :header-rows: 0
> > + :stub-columns: 0
> > + :widths: 8 8 8 8
> > +
> > + * - Y'\ :sub:`00[7:0]`
> > + - Y'\ :sub:`01[5:0] (bits 7--2)` Y'\ :sub:`00[9:8]`\ (bits 1--0)
> > + - Y'\ :sub:`02[3:0] (bits 7--4)` Y'\ :sub:`01[9:6]`\ (bits 3--0)
> > + - unused (bits 7--6)` Y'\ :sub:`02[9:4]`\ (bits 5--0)
> > +
> > +.. raw:: latex
> > +
> > + \small
> > +
> > +.. tabularcolumns:: |p{1.2cm}||p{1.2cm}||p{1.2cm}||p{1.2cm}|p{3.2cm}|p{3.2cm}|
> > +
> > +.. flat-table::
> > + :header-rows: 0
> > + :stub-columns: 0
> > + :widths: 12 12 12 12 12 12 12 12
> > +
> > + * - Cb\ :sub:`00[7:0]`
> > + - Cr\ :sub:`00[5:0]`\ (bits 7--2) Cb\ :sub:`00[9:8]`\ (bits 1--0)
> > + - Cb\ :sub:`01[3:0]`\ (bits 7--4) Cr\ :sub:`00[9:6]`\ (bits 3--0)
> > + - unused (bits 7--6) Cb\ :sub:`02[9:4]`\ (bits 5--0)
> > + - Cr\ :sub:`01[7:0]`
> > + - Cb\ :sub:`02[5:0]`\ (bits 7--2) Cr\ :sub:`01[9:8]`\ (bits 1--0)
> > + - Cr\ :sub:`02[3:0]`\ (bits 7--4) Cb\ :sub:`02[9:6]`\ (bits 3--0)
> > + - unused (bits 7--6) Cr\ :sub:`02[9:4]`\ (bits 5--0)
> > +
> > +.. raw:: latex
> > +
> > + \normalsize
> > +
> > +
> > +
> > +
> > diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
> > index 1840224faa41..56ef9ee9c0e1 100644
> > --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
> > +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
> > @@ -697,6 +697,18 @@ Data in the 12 high bits, zeros in the 4 low bits, arranged in little endian ord
> > - Cr\ :sub:`11`
> >
> >
> > +V4L2_PIX_FMT_NV12_COL128
> > +------------------------
> > +
> > +``V4L2_PIX_FMT_NV12_COL128`` is the tiled version of
> > +``V4L2_PIX_FMT_NV12`` with the image broken down into 128 pixel wide columns of
> > +Y followed by the associated combined CbCr plane.
> > +The normal bytesperline is effectively fixed at 128. However the format
> > +requires knowledge of the stride between columns, therefore the bytesperline
> > +value has been repurposed to denote the number of 128 byte long lines between
> > +the start of each column.
> > +
> > +
> > Fully Planar YUV Formats
> > ========================
> >
> > diff --git a/Documentation/userspace-api/media/v4l/yuv-formats.rst b/Documentation/userspace-api/media/v4l/yuv-formats.rst
> > index 24b34cdfa6fe..458e07782c8d 100644
> > --- a/Documentation/userspace-api/media/v4l/yuv-formats.rst
> > +++ b/Documentation/userspace-api/media/v4l/yuv-formats.rst
> > @@ -270,4 +270,23 @@ image.
> > pixfmt-y8i
> > pixfmt-y12i
> > pixfmt-uv8
> > + pixfmt-yuyv
> > + pixfmt-uyvy
> > + pixfmt-yvyu
> > + pixfmt-vyuy
> > + pixfmt-y41p
> > + pixfmt-yuv420
> > + pixfmt-yuv420m
> > + pixfmt-yuv422m
> > + pixfmt-yuv444m
> > + pixfmt-yuv410
> > + pixfmt-yuv422p
> > + pixfmt-yuv411p
> > + pixfmt-nv12
> > + pixfmt-nv12m
> > + pixfmt-nv12mt
> > + pixfmt-nv12-col128
> > + pixfmt-nv16
> > + pixfmt-nv16m
> > + pixfmt-nv24
>
> Unrelated fixes should have their own patch.
>
> > pixfmt-m420
> > diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
> > index f3584bc3e278..20c83a4c02d6 100644
> > --- a/drivers/media/v4l2-core/v4l2-ioctl.c
> > +++ b/drivers/media/v4l2-core/v4l2-ioctl.c
> > @@ -1368,6 +1368,8 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
> > case V4L2_PIX_FMT_NV12MT: descr = "Y/UV 4:2:0 (64x32 MB, N-C)"; break;
> > case V4L2_PIX_FMT_NV12MT_16X16: descr = "Y/UV 4:2:0 (16x16 MB, N-C)"; break;
> > case V4L2_PIX_FMT_P012M: descr = "12-bit Y/UV 4:2:0 (N-C)"; break;
> > + case V4L2_PIX_FMT_NV12_COL128: descr = "Y/CbCr 4:2:0 (128b cols)"; break;
> > + case V4L2_PIX_FMT_NV12_10_COL128: descr = "10-bit Y/CbCr 4:2:0 (128b cols)"; break;
> > case V4L2_PIX_FMT_YUV420M: descr = "Planar YUV 4:2:0 (N-C)"; break;
> > case V4L2_PIX_FMT_YVU420M: descr = "Planar YVU 4:2:0 (N-C)"; break;
> > case V4L2_PIX_FMT_YUV422M: descr = "Planar YUV 4:2:2 (N-C)"; break;
> > diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
> > index 1c9e1275c422..f93e341a1dd7 100644
> > --- a/include/uapi/linux/videodev2.h
> > +++ b/include/uapi/linux/videodev2.h
> > @@ -807,6 +807,10 @@ struct v4l2_pix_format {
> > #define V4L2_PIX_FMT_QC10C v4l2_fourcc('Q', '1', '0', 'C') /* Qualcomm 10-bit compressed */
> > #define V4L2_PIX_FMT_AJPG v4l2_fourcc('A', 'J', 'P', 'G') /* Aspeed JPEG */
> > #define V4L2_PIX_FMT_HEXTILE v4l2_fourcc('H', 'X', 'T', 'L') /* Hextile compressed */
> > +#define V4L2_PIX_FMT_NV12_COL128 v4l2_fourcc('N', 'C', '1', '2') /* 12 Y/CbCr 4:2:0 128 pixel wide column */
> > +#define V4L2_PIX_FMT_NV12_10_COL128 v4l2_fourcc('N', 'C', '3', '0')
> > + /* Y/CbCr 4:2:0 10bpc, 3x10 packed as 4 bytes in
> > + * a 128 bytes / 96 pixel wide column */
> >
> > /* 10bit raw packed, 32 bytes for every 25 pixels, last LSB 6 bits unused */
> > #define V4L2_PIX_FMT_IPU3_SBGGR10 v4l2_fourcc('i', 'p', '3', 'b') /* IPU3 packed 10-bit BGGR bayer */
>
> Can you add this format to v4l2-common please?
>
> Nicolas
>
