From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
Some of the Broadcom codec blocks use a column based YUV4:2:0 image
format, so add the documentation and defines for both 8 and 10 bit
versions.
Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
Signed-off-by: Maarten Vanraes <maarten@xxxxxxxx>
---
.../media/v4l/pixfmt-nv12-col128.rst | 215 ++++++++++++++++++
.../media/v4l/pixfmt-yuv-planar.rst | 12 +
.../userspace-api/media/v4l/yuv-formats.rst | 19 ++
drivers/media/v4l2-core/v4l2-ioctl.c | 2 +
include/uapi/linux/videodev2.h | 4 +
5 files changed, 252 insertions(+)
create mode 100644 Documentation/userspace-api/media/v4l/pixfmt-nv12-col128.rst
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-nv12-col128.rst b/Documentation/userspace-api/media/v4l/pixfmt-nv12-col128.rst
new file mode 100644
index 000000000000..196ca33a5dff
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/pixfmt-nv12-col128.rst
@@ -0,0 +1,215 @@
+.. Permission is granted to copy, distribute and/or modify this
+.. document under the terms of the GNU Free Documentation License,
+.. Version 1.1 or any later version published by the Free Software
+.. Foundation, with no Invariant Sections, no Front-Cover Texts
+.. and no Back-Cover Texts. A copy of the license is included at
+.. Documentation/media/uapi/fdl-appendix.rst.
+..
+.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _V4L2_PIX_FMT_NV12_COL128:
+.. _V4L2_PIX_FMT_NV12_10_COL128:
+
+********************************************************************************
+V4L2_PIX_FMT_NV12_COL128, V4L2_PIX_FMT_NV12_10_COL128
+********************************************************************************
+
+
+V4L2_PIX_FMT_NV21_COL128
+Formats with ½ horizontal and vertical chroma resolution. This format
+has two planes - one for luminance and one for chrominance. Chroma
+samples are interleaved. The difference to ``V4L2_PIX_FMT_NV12`` is the
+memory layout. The image is split into columns of 128 bytes wide rather than
+being in raster order.
+
+V4L2_PIX_FMT_NV12_10_COL128
+Follows the same pattern as ``V4L2_PIX_FMT_NV21_COL128`` with 128 byte, but is
+a 10bit format with 3 10-bit samples being packed into 4 bytes. Each 128 byte
+wide column therefore contains 96 samples.
+
+
+Description
+===========
+
+This is the two-plane versions of the YUV 4:2:0 format where data is
+grouped into 128 byte wide columns. The three components are separated into
+two sub-images or planes. The Y plane has one byte per pixel and pixels
+are grouped into 128 byte wide columns. The CbCr plane has the same width,
+in bytes, as the Y plane (and the image), but is half as tall in pixels.
+The chroma plane is also in 128 byte columns, reflecting 64 Cb and 64 Cr
+samples.
+
+The chroma samples for a column follow the luma samples. If there is any
+paddding, then that will be reflected via the selection API.
+The luma height must be a multiple of 2 lines.
+
+The normal bytesperline is effectively fixed at 128. However the format
+requires knowledge of the stride between columns, therefore the bytesperline
+value has been repurposed to denote the number of 128 byte long lines between
+the start of each column.
+
+**Byte Order.**
+
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 12 12 12 12 12 4 12 12 12 12
+
+ * - start + 0:
+ - Y'\ :sub:`0,0`
+ - Y'\ :sub:`0,1`
+ - Y'\ :sub:`0,2`
+ - Y'\ :sub:`0,3`
+ - ...
+ - Y'\ :sub:`0,124`
+ - Y'\ :sub:`0,125`
+ - Y'\ :sub:`0,126`
+ - Y'\ :sub:`0,127`
+ * - start + 128:
+ - Y'\ :sub:`1,0`
+ - Y'\ :sub:`1,1`
+ - Y'\ :sub:`1,2`
+ - Y'\ :sub:`1,3`
+ - ...
+ - Y'\ :sub:`1,124`
+ - Y'\ :sub:`1,125`
+ - Y'\ :sub:`1,126`
+ - Y'\ :sub:`1,127`
+ * - start + 256:
+ - Y'\ :sub:`2,0`
+ - Y'\ :sub:`2,1`
+ - Y'\ :sub:`2,2`
+ - Y'\ :sub:`2,3`
+ - ...
+ - Y'\ :sub:`2,124`
+ - Y'\ :sub:`2,125`
+ - Y'\ :sub:`2,126`
+ - Y'\ :sub:`2,127`
+ * - ...
+ - ...
+ - ...
+ - ...
+ - ...
+ - ...
+ - ...
+ - ...
+ * - start + ((height-1) * 128):
+ - Y'\ :sub:`height-1,0`
+ - Y'\ :sub:`height-1,1`
+ - Y'\ :sub:`height-1,2`
+ - Y'\ :sub:`height-1,3`
+ - ...
+ - Y'\ :sub:`height-1,124`
+ - Y'\ :sub:`height-1,125`
+ - Y'\ :sub:`height-1,126`
+ - Y'\ :sub:`height-1,127`
+ * - start + ((height) * 128):
+ - Cb\ :sub:`0,0`
+ - Cr\ :sub:`0,0`
+ - Cb\ :sub:`0,1`
+ - Cr\ :sub:`0,1`
+ - ...
+ - Cb\ :sub:`0,62`
+ - Cr\ :sub:`0,62`
+ - Cb\ :sub:`0,63`
+ - Cr\ :sub:`0,63`
+ * - start + ((height+1) * 128):
+ - Cb\ :sub:`1,0`
+ - Cr\ :sub:`1,0`
+ - Cb\ :sub:`1,1`
+ - Cr\ :sub:`1,1`
+ - ...
+ - Cb\ :sub:`1,62`
+ - Cr\ :sub:`1,62`
+ - Cb\ :sub:`1,63`
+ - Cr\ :sub:`1,63`
+ * - ...
+ - ...
+ - ...
+ - ...
+ - ...
+ - ...
+ - ...
+ - ...
+ * - start + ((height+(height/2)-1) * 128):
+ - Cb\ :sub:`(height/2)-1,0`
+ - Cr\ :sub:`(height/2)-1,0`
+ - Cb\ :sub:`(height/2)-1,1`
+ - Cr\ :sub:`(height/2)-1,1`
+ - ...
+ - Cb\ :sub:`(height/2)-1,62`
+ - Cr\ :sub:`(height/2)-1,62`
+ - Cb\ :sub:`(height/2)-1,63`
+ - Cr\ :sub:`(height/2)-1,63`
+ * - start + (bytesperline * 128):
+ - Y'\ :sub:`0,128`
+ - Y'\ :sub:`0,129`
+ - Y'\ :sub:`0,130`
+ - Y'\ :sub:`0,131`
+ - ...
+ - Y'\ :sub:`0,252`
+ - Y'\ :sub:`0,253`
+ - Y'\ :sub:`0,254`
+ - Y'\ :sub:`0,255`
+ * - ...
+ - ...
+ - ...
+ - ...
+ - ...
+ - ...
+ - ...
+ - ...
+
+V4L2_PIX_FMT_NV12_10_COL128 uses the same 128 byte column structure, but
+encodes 10-bit YUV.
+3 10-bit values are packed into 4 bytes as bits 9:0, 19:10, and 29:20, with
+bits 30 & 31 unused. For the luma plane, bits 9:0 are Y0, 19:10 are Y1, and
+29:20 are Y2. For the chroma plane the samples always come in pairs of Cr
+and Cb, so it needs to be considered 6 values packed in 8 bytes.
+
+Bit-packed representation.
+
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{1.2cm}||p{1.2cm}||p{1.2cm}||p{1.2cm}|p{3.2cm}|p{3.2cm}|
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 8 8 8 8
+
+ * - Y'\ :sub:`00[7:0]`
+ - Y'\ :sub:`01[5:0] (bits 7--2)` Y'\ :sub:`00[9:8]`\ (bits 1--0)
+ - Y'\ :sub:`02[3:0] (bits 7--4)` Y'\ :sub:`01[9:6]`\ (bits 3--0)
+ - unused (bits 7--6)` Y'\ :sub:`02[9:4]`\ (bits 5--0)
+
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{1.2cm}||p{1.2cm}||p{1.2cm}||p{1.2cm}|p{3.2cm}|p{3.2cm}|
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 12 12 12 12 12 12 12 12
+
+ * - Cb\ :sub:`00[7:0]`
+ - Cr\ :sub:`00[5:0]`\ (bits 7--2) Cb\ :sub:`00[9:8]`\ (bits 1--0)
+ - Cb\ :sub:`01[3:0]`\ (bits 7--4) Cr\ :sub:`00[9:6]`\ (bits 3--0)
+ - unused (bits 7--6) Cb\ :sub:`02[9:4]`\ (bits 5--0)
+ - Cr\ :sub:`01[7:0]`
+ - Cb\ :sub:`02[5:0]`\ (bits 7--2) Cr\ :sub:`01[9:8]`\ (bits 1--0)
+ - Cr\ :sub:`02[3:0]`\ (bits 7--4) Cb\ :sub:`02[9:6]`\ (bits 3--0)
+ - unused (bits 7--6) Cr\ :sub:`02[9:4]`\ (bits 5--0)
+
+.. raw:: latex
+
+ \normalsize
+
+
+
+
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
index 1840224faa41..56ef9ee9c0e1 100644
--- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
+++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
@@ -697,6 +697,18 @@ Data in the 12 high bits, zeros in the 4 low bits, arranged in little endian ord
- Cr\ :sub:`11`
+V4L2_PIX_FMT_NV12_COL128
+------------------------
+
+``V4L2_PIX_FMT_NV12_COL128`` is the tiled version of
+``V4L2_PIX_FMT_NV12`` with the image broken down into 128 pixel wide columns of
+Y followed by the associated combined CbCr plane.
+The normal bytesperline is effectively fixed at 128. However the format
+requires knowledge of the stride between columns, therefore the bytesperline
+value has been repurposed to denote the number of 128 byte long lines between
+the start of each column.
+
+
Fully Planar YUV Formats
========================
diff --git a/Documentation/userspace-api/media/v4l/yuv-formats.rst b/Documentation/userspace-api/media/v4l/yuv-formats.rst
index 24b34cdfa6fe..458e07782c8d 100644
--- a/Documentation/userspace-api/media/v4l/yuv-formats.rst
+++ b/Documentation/userspace-api/media/v4l/yuv-formats.rst
@@ -270,4 +270,23 @@ image.
pixfmt-y8i
pixfmt-y12i
pixfmt-uv8
+ pixfmt-yuyv
+ pixfmt-uyvy
+ pixfmt-yvyu
+ pixfmt-vyuy
+ pixfmt-y41p
+ pixfmt-yuv420
+ pixfmt-yuv420m
+ pixfmt-yuv422m
+ pixfmt-yuv444m
+ pixfmt-yuv410
+ pixfmt-yuv422p
+ pixfmt-yuv411p
+ pixfmt-nv12
+ pixfmt-nv12m
+ pixfmt-nv12mt
+ pixfmt-nv12-col128
+ pixfmt-nv16
+ pixfmt-nv16m
+ pixfmt-nv24
pixfmt-m420
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index f3584bc3e278..20c83a4c02d6 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -1368,6 +1368,8 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
case V4L2_PIX_FMT_NV12MT: descr = "Y/UV 4:2:0 (64x32 MB, N-C)"; break;
case V4L2_PIX_FMT_NV12MT_16X16: descr = "Y/UV 4:2:0 (16x16 MB, N-C)"; break;
case V4L2_PIX_FMT_P012M: descr = "12-bit Y/UV 4:2:0 (N-C)"; break;
+ case V4L2_PIX_FMT_NV12_COL128: descr = "Y/CbCr 4:2:0 (128b cols)"; break;
+ case V4L2_PIX_FMT_NV12_10_COL128: descr = "10-bit Y/CbCr 4:2:0 (128b cols)"; break;
case V4L2_PIX_FMT_YUV420M: descr = "Planar YUV 4:2:0 (N-C)"; break;
case V4L2_PIX_FMT_YVU420M: descr = "Planar YVU 4:2:0 (N-C)"; break;
case V4L2_PIX_FMT_YUV422M: descr = "Planar YUV 4:2:2 (N-C)"; break;
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index 1c9e1275c422..f93e341a1dd7 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -807,6 +807,10 @@ struct v4l2_pix_format {
#define V4L2_PIX_FMT_QC10C v4l2_fourcc('Q', '1', '0', 'C') /* Qualcomm 10-bit compressed */
#define V4L2_PIX_FMT_AJPG v4l2_fourcc('A', 'J', 'P', 'G') /* Aspeed JPEG */
#define V4L2_PIX_FMT_HEXTILE v4l2_fourcc('H', 'X', 'T', 'L') /* Hextile compressed */
+#define V4L2_PIX_FMT_NV12_COL128 v4l2_fourcc('N', 'C', '1', '2') /* 12 Y/CbCr 4:2:0 128 pixel wide column */
+#define V4L2_PIX_FMT_NV12_10_COL128 v4l2_fourcc('N', 'C', '3', '0')
+ /* Y/CbCr 4:2:0 10bpc, 3x10 packed as 4 bytes in
+ * a 128 bytes / 96 pixel wide column */
/* 10bit raw packed, 32 bytes for every 25 pixels, last LSB 6 bits unused */
#define V4L2_PIX_FMT_IPU3_SBGGR10 v4l2_fourcc('i', 'p', '3', 'b') /* IPU3 packed 10-bit BGGR bayer */
--
2.41.0
