Hi Mikhail,
Thank you for the patch.
On Thu, Feb 29, 2024 at 07:53:22PM +0300, Mikhail Rudenko wrote:
> Use runtime PM autosuspend to avoid powering off the sensor during
> fast stop-reconfigure-restart cycles.
>
> Signed-off-by: Mikhail Rudenko <mike.rudenko@xxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/i2c/ov4689.c | 15 +++++++++++----
> 1 file changed, 11 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/i2c/ov4689.c b/drivers/media/i2c/ov4689.c
> index 0e0e694510aa..2354397ab34c 100644
> --- a/drivers/media/i2c/ov4689.c
> +++ b/drivers/media/i2c/ov4689.c
> @@ -426,7 +426,8 @@ static int ov4689_s_stream(struct v4l2_subdev *sd, int on)
> } else {
> cci_write(ov4689->regmap, OV4689_REG_CTRL_MODE,
> OV4689_MODE_SW_STANDBY, NULL);
> - pm_runtime_put(dev);
> + pm_runtime_mark_last_busy(dev);
> + pm_runtime_put_autosuspend(dev);
> }
>
> unlock_and_return:
> @@ -606,7 +607,8 @@ static int ov4689_set_ctrl(struct v4l2_ctrl *ctrl)
> break;
> }
>
> - pm_runtime_put(dev);
> + pm_runtime_mark_last_busy(dev);
> + pm_runtime_put_autosuspend(dev);
>
> return ret;
> }
> @@ -876,8 +878,10 @@ static int ov4689_probe(struct i2c_client *client)
> }
>
> pm_runtime_set_active(dev);
> + pm_runtime_get_noresume(dev);
> pm_runtime_enable(dev);
> - pm_runtime_idle(dev);
> + pm_runtime_set_autosuspend_delay(dev, 1000);
> + pm_runtime_use_autosuspend(dev);
>
> ret = v4l2_async_register_subdev_sensor(sd);
> if (ret) {
> @@ -885,11 +889,14 @@ static int ov4689_probe(struct i2c_client *client)
> goto err_clean_subdev_pm;
> }
>
> + pm_runtime_mark_last_busy(dev);
> + pm_runtime_put_autosuspend(dev);
> +
> return 0;
>
> err_clean_subdev_pm:
> pm_runtime_disable(dev);
> - pm_runtime_set_suspended(dev);
> + pm_runtime_put_noidle(dev);
> v4l2_subdev_cleanup(sd);
> err_clean_entity:
> media_entity_cleanup(&sd->entity);
--
Regards,
Laurent Pinchart
