Hi Kieran,
and thanks for the review!
On 2024-03-04 at 16:54 GMT, Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx> wrote:
> Quoting Mikhail Rudenko (2024-02-29 16:53:25)
>> The OV4689 sensor supports horizontal and vertical flipping. Add
>> appropriate controls to the driver. Toggling both array flip and
>> digital flip bits allows to achieve flipping while maintaining output
>> Bayer order. Note that the default value of hflip control corresponds
>> to both bits set, as it was before this patch.
>>
>> Signed-off-by: Mikhail Rudenko <mike.rudenko@xxxxxxxxx>
>> ---
>> drivers/media/i2c/ov4689.c | 24 ++++++++++++++++++++++--
>> 1 file changed, 22 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/media/i2c/ov4689.c b/drivers/media/i2c/ov4689.c
>> index 8283a9ac86c9..01ee8cadb7c9 100644
>> --- a/drivers/media/i2c/ov4689.c
>> +++ b/drivers/media/i2c/ov4689.c
>> @@ -42,6 +42,14 @@
>> #define OV4689_REG_VTS CCI_REG16(0x380e)
>> #define OV4689_VTS_MAX 0x7fff
>>
>> +#define OV4689_REG_TIMING_FORMAT1 CCI_REG8(0x3820)
>> +#define OV4689_REG_TIMING_FORMAT2 CCI_REG8(0x3821)
>
> I assume these registerse are called TIMING_FORMAT1 and TIMING_FORMAT2,
> and they don't have any named reference to H/V?
Exactly.
> It's a shame, but I might add /* Horizontal */ and /* Vertical */
> accordingly to these definitions, though not specifically required.
Thanks for the tip, will do it in v3.
> Looks like a good breakdown of the control though.
>
> Reviewed-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
>
>> +#define OV4689_TIMING_FLIP_MASK GENMASK(2, 1)
>> +#define OV4689_TIMING_FLIP_ARRAY BIT(1)
>> +#define OV4689_TIMING_FLIP_DIGITAL BIT(2)
>> +#define OV4689_TIMING_FLIP_BOTH (OV4689_TIMING_FLIP_ARRAY |\
>> + OV4689_TIMING_FLIP_DIGITAL)
>> +
>> #define OV4689_REG_TEST_PATTERN CCI_REG8(0x5040)
>> #define OV4689_TEST_PATTERN_ENABLE 0x80
>> #define OV4689_TEST_PATTERN_DISABLE 0x0
>> @@ -183,7 +191,6 @@ static const struct cci_reg_sequence ov4689_2688x1520_regs[] = {
>> {CCI_REG8(0x3811), 0x08}, /* H_WIN_OFF_L h_win_off[7:0] = 0x08*/
>> {CCI_REG8(0x3813), 0x04}, /* V_WIN_OFF_L v_win_off[7:0] = 0x04 */
>> {CCI_REG8(0x3819), 0x01}, /* VSYNC_END_L vsync_end_point[7:0] = 0x01 */
>> - {CCI_REG8(0x3821), 0x06}, /* TIMING_FORMAT2 array_h_mirror = 1, digital_h_mirror = 1 */
>>
>> /* OTP control */
>> {CCI_REG8(0x3d85), 0x36}, /* OTP_REG85 OTP_power_up_load_setting_enable = 1,
>> @@ -607,6 +614,16 @@ static int ov4689_set_ctrl(struct v4l2_ctrl *ctrl)
>> (ctrl->val + ov4689->cur_mode->width) /
>> OV4689_HTS_DIVIDER, &ret);
>> break;
>> + case V4L2_CID_VFLIP:
>> + cci_update_bits(regmap, OV4689_REG_TIMING_FORMAT1,
>> + OV4689_TIMING_FLIP_MASK,
>> + ctrl->val ? OV4689_TIMING_FLIP_BOTH : 0, &ret);
>> + break;
>> + case V4L2_CID_HFLIP:
>> + cci_update_bits(regmap, OV4689_REG_TIMING_FORMAT2,
>> + OV4689_TIMING_FLIP_MASK,
>> + ctrl->val ? 0 : OV4689_TIMING_FLIP_BOTH, &ret);
>> + break;
>> default:
>> dev_warn(dev, "%s Unhandled id:0x%x, val:0x%x\n",
>> __func__, ctrl->id, ctrl->val);
>> @@ -637,7 +654,7 @@ static int ov4689_initialize_controls(struct ov4689 *ov4689)
>>
>> handler = &ov4689->ctrl_handler;
>> mode = ov4689->cur_mode;
>> - ret = v4l2_ctrl_handler_init(handler, 10);
>> + ret = v4l2_ctrl_handler_init(handler, 12);
>> if (ret)
>> return ret;
>>
>> @@ -677,6 +694,9 @@ static int ov4689_initialize_controls(struct ov4689 *ov4689)
>> ARRAY_SIZE(ov4689_test_pattern_menu) - 1,
>> 0, 0, ov4689_test_pattern_menu);
>>
>> + v4l2_ctrl_new_std(handler, &ov4689_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1, 0);
>> + v4l2_ctrl_new_std(handler, &ov4689_ctrl_ops, V4L2_CID_HFLIP, 0, 1, 1, 0);
>> +
>> if (handler->error) {
>> ret = handler->error;
>> dev_err(ov4689->dev, "Failed to init controls(%d)\n", ret);
>> --
>> 2.43.0
>>
--
Best regards,
Mikhail Rudenko
