Re: Re: [PATCH RFC 04/21] dt-bindings: media: ti,j721e-csi2rx-shim: Support 32 dma chans

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

On Feb 22, 2024 at 05:25:13 -0700, Rob Herring wrote:
> 
> On Thu, 22 Feb 2024 17:01:20 +0530, Jai Luthra wrote:
> > The CSI2RX SHIM IP can support a maximum of 32x DMA channels.
> > 
> > These can be used to split incoming "streams" of data on the CSI-RX
> > port, distinguished by MIPI Virtual Channel (or Data Type), into
> > different locations in memory (/dev/videoX nodes).
> > 
> > Actual number of DMA channels reserved is different for each SoC
> > integrating this IP, but a maximum of 32x channels are always available
> > in this IP's register space, so set minimum as 1 and maximum as 32.
> > 
> > Link: https://www.ti.com/lit/pdf/spruiv7
> > Signed-off-by: Jai Luthra <j-luthra@xxxxxx>
> > ---
> >  .../bindings/media/ti,j721e-csi2rx-shim.yaml       | 40 ++++++++++++++++++++--
> >  1 file changed, 37 insertions(+), 3 deletions(-)
> > 
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml: properties:dma-names: {'minItems': 1, 'maxItems': 32, 'items': [{'const': 'rx0'}, {'const': 'rx1'}, {'const': 'rx2'}, {'const': 'rx3'}, {'const': 'rx4'}, {'const': 'rx5'}, {'const': 'rx6'}, {'const': 'rx7'}, {'const': 'rx8'}, {'const': 'rx9'}, {'const': 'rx10'}, {'const': 'rx11'}, {'const': 'rx12'}, {'const': 'rx13'}, {'const': 'rx14'}, {'const': 'rx15'}, {'const': 'rx16'}, {'const': 'rx17'}, {'const': 'rx18'}, {'const': 'rx19'}, {'const': 'rx20'}, {'const': 'rx21'}, {'const': 'rx22'}, {'const': 'rx23'}, {'const': 'rx24'}, {'const': 'rx25'}, {'const': 'rx26'}, {'const': 'rx27'}, {'const': 'rx28'}, {'const': 'rx29'}, {'const': 'rx30'}, {'const': 'rx31'}]} should not be valid under {'required': ['maxItems']}
> 	hint: "maxItems" is not needed with an "items" list

Thanks will fix in next revision.

> 	from schema $id: http://devicetree.org/meta-schemas/items.yaml#
> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240222-multistream-v1-4-1837ed916eeb@xxxxxx
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
> 

-- 
Thanks,
Jai

GPG Fingerprint: 4DE0 D818 E5D5 75E8 D45A AFC5 43DE 91F9 249A 7145

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux