The CSI2RX SHIM IP can support a maximum of 32x DMA channels. These can be used to split incoming "streams" of data on the CSI-RX port, distinguished by MIPI Virtual Channel (or Data Type), into different locations in memory (/dev/videoX nodes). Actual number of DMA channels reserved is different for each SoC integrating this IP, but a maximum of 32x channels are always available in this IP's register space, so set minimum as 1 and maximum as 32. Link: https://www.ti.com/lit/pdf/spruiv7 Signed-off-by: Jai Luthra <j-luthra@xxxxxx> --- .../bindings/media/ti,j721e-csi2rx-shim.yaml | 40 ++++++++++++++++++++-- 1 file changed, 37 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml index f762fdc05e4d..e47dab7b959e 100644 --- a/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml +++ b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml @@ -20,11 +20,45 @@ properties: const: ti,j721e-csi2rx-shim dmas: - maxItems: 1 + minItems: 1 + maxItems: 32 dma-names: + minItems: 1 + maxItems: 32 items: - const: rx0 + - const: rx1 + - const: rx2 + - const: rx3 + - const: rx4 + - const: rx5 + - const: rx6 + - const: rx7 + - const: rx8 + - const: rx9 + - const: rx10 + - const: rx11 + - const: rx12 + - const: rx13 + - const: rx14 + - const: rx15 + - const: rx16 + - const: rx17 + - const: rx18 + - const: rx19 + - const: rx20 + - const: rx21 + - const: rx22 + - const: rx23 + - const: rx24 + - const: rx25 + - const: rx26 + - const: rx27 + - const: rx28 + - const: rx29 + - const: rx30 + - const: rx31 reg: maxItems: 1 @@ -62,8 +96,8 @@ examples: ti_csi2rx0: ticsi2rx@4500000 { compatible = "ti,j721e-csi2rx-shim"; - dmas = <&main_udmap 0x4940>; - dma-names = "rx0"; + dmas = <&main_udmap 0x4940>, <&main_udmap 0x4941>; + dma-names = "rx0", "rx1"; reg = <0x4500000 0x1000>; power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; -- 2.43.0
