Additional controls might require the sensor to be powered up
to set the control value. Currently, only the exposure control
powers up the sensor.
Move the power up sequence out of the switch-case block.
In a subsequent patch, test pattern control will be added that
needs the sensor to be powered up. Hence, refactor the power
sequence to be present outside the switch-case block.
The VBLANK control is also moved out of the switch-case in order
to be handled early on, to propagate the changes to other controls.
Signed-off-by: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx>
---
drivers/media/i2c/imx335.c | 35 ++++++++++++++++++++---------------
1 file changed, 20 insertions(+), 15 deletions(-)
diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c
index 27f850a5b9b7..e2445b94cf91 100644
--- a/drivers/media/i2c/imx335.c
+++ b/drivers/media/i2c/imx335.c
@@ -527,26 +527,31 @@ static int imx335_set_ctrl(struct v4l2_ctrl *ctrl)
u32 exposure;
int ret;
- switch (ctrl->id) {
- case V4L2_CID_VBLANK:
+ /* Propagate change of current control to all related controls */
+ if (ctrl->id == V4L2_CID_VBLANK) {
imx335->vblank = imx335->vblank_ctrl->val;
dev_dbg(imx335->dev, "Received vblank %u, new lpfr %u\n",
imx335->vblank,
imx335->vblank + imx335->cur_mode->height);
- ret = __v4l2_ctrl_modify_range(imx335->exp_ctrl,
- IMX335_EXPOSURE_MIN,
- imx335->vblank +
- imx335->cur_mode->height -
- IMX335_EXPOSURE_OFFSET,
- 1, IMX335_EXPOSURE_DEFAULT);
- break;
- case V4L2_CID_EXPOSURE:
- /* Set controls only if sensor is in power on state */
- if (!pm_runtime_get_if_in_use(imx335->dev))
- return 0;
+ return __v4l2_ctrl_modify_range(imx335->exp_ctrl,
+ IMX335_EXPOSURE_MIN,
+ imx335->vblank +
+ imx335->cur_mode->height -
+ IMX335_EXPOSURE_OFFSET,
+ 1, IMX335_EXPOSURE_DEFAULT);
+ }
+
+ /*
+ * Applying V4L2 control value only happens
+ * when power is up for streaming.
+ */
+ if (pm_runtime_get_if_in_use(imx335->dev) == 0)
+ return 0;
+ switch (ctrl->id) {
+ case V4L2_CID_EXPOSURE:
exposure = ctrl->val;
analog_gain = imx335->again_ctrl->val;
@@ -555,14 +560,14 @@ static int imx335_set_ctrl(struct v4l2_ctrl *ctrl)
ret = imx335_update_exp_gain(imx335, exposure, analog_gain);
- pm_runtime_put(imx335->dev);
-
break;
default:
dev_err(imx335->dev, "Invalid control %d\n", ctrl->id);
ret = -EINVAL;
}
+ pm_runtime_put(imx335->dev);
+
return ret;
}
--
2.43.0
