This series adds support for additional link frequency and test pattern generator on IMX335. Patch 1/5 is a drive-by patch which sets default value to one of the reserved register. The non-default value of 0x01 has been found responsible to break CSI-2 configuration on one of the i.MX8MP based platform. Setting to default value seem to fix it and has been tested on RPi5 (downstream BSP) in additional to i.MX8MP platform running mainline. Patch 2/5 adds usage of v4l2_link_freq_to_bitmap V4L2 helper. Patch 3/5 supports for additional link-frequency supported by IMX335 Patch 4/5 is also a prep-up patch for TPG introduction(in 5/5), as the test pattern needs sensor to be powered up to apply the test pattern. Patch 5/5 adds the TPG. changes in v3: - Update the patch 1/5 to set the reserved register value to it's default value (instead of dropping it). - Drop "i2c: " from commit message in 3/5 Changes in v2: - add new patch 2/5 to use v4l2_link_freq_to_bitmap - fixup a return; in 4/5 Matthias Fend (1): media: imx335: Add support for test pattern generator Umang Jain (4): media: imx335: Set reserved register to default value media: imx335: Use v4l2_link_freq_to_bitmap helper media: imx335: Support multiple link frequency media: imx335: Refactor power sequence to set controls drivers/media/i2c/imx335.c | 251 ++++++++++++++++++++++++++++++------- 1 file changed, 206 insertions(+), 45 deletions(-) -- 2.43.0
