This patch adds support for the MCDE, Memory-to-display controller,
found in the ST-Ericsson ux500 products.
The configuration of the MCDE hardware, the MCDE framebuffer device
and the display that is connected to ux500 is managed in this patch.
Signed-off-by: Jimmy Rubin <jimmy.rubin@xxxxxxxxxxxxxx>
Acked-by: Linus Walleij <linus.walleij.stericsson.com>
---
arch/arm/mach-ux500/Kconfig | 8 +
arch/arm/mach-ux500/Makefile | 1 +
arch/arm/mach-ux500/board-mop500-mcde.c | 209 ++++++++++++++++++++++++
arch/arm/mach-ux500/board-mop500-regulators.c | 28 +++
arch/arm/mach-ux500/board-mop500.c | 3 +
arch/arm/mach-ux500/devices-db8500.c | 68 ++++++++
arch/arm/mach-ux500/include/mach/db8500-regs.h | 7 +
arch/arm/mach-ux500/include/mach/devices.h | 1 +
arch/arm/mach-ux500/include/mach/prcmu-regs.h | 1 +
arch/arm/mach-ux500/include/mach/prcmu.h | 3 +
arch/arm/mach-ux500/prcmu.c | 129 +++++++++++++++
11 files changed, 458 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-ux500/board-mop500-mcde.c
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 2dd44a0..a868629 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -50,5 +50,13 @@ config U5500_MBOX
default y
help
Add support for U5500 mailbox communication with modem side
+#Configuration for MCDE setup
+config DISPLAY_GENERIC_DSI_PRIMARY
+ bool "Main display support"
+ depends on MACH_U8500_MOP && FB_MCDE && REGULATOR
+ select MCDE_DISPLAY_GENERIC_DSI
+ default y
+ help
+ Say yes here if main display exists
endif
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 9e27a84..5562c85 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -13,3 +13,4 @@ obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
obj-$(CONFIG_REGULATOR_AB8500) += board-mop500-regulators.o
obj-$(CONFIG_U5500_MODEM_IRQ) += modem_irq.o
obj-$(CONFIG_U5500_MBOX) += mbox.o
+obj-$(CONFIG_FB_MCDE) += board-mop500-mcde.o
diff --git a/arch/arm/mach-ux500/board-mop500-mcde.c b/arch/arm/mach-ux500/board-mop500-mcde.c
new file mode 100644
index 0000000..3695746
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-mcde.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Marcus Lorentzon <marcus.xm.lorentzon@xxxxxxxxxxxxxx>
+ * for ST-Ericsson.
+ *
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <video/mcde/mcde_display.h>
+#include <video/mcde/mcde_display-generic_dsi.h>
+#include <video/mcde/mcde_fb.h>
+#include <video/mcde/mcde_dss.h>
+
+#include <mach/db8500-regs.h>
+
+#include "board-mop500.h"
+
+#define DSI_UNIT_INTERVAL_0 0x9
+#define DSI_UNIT_INTERVAL_1 0x9
+#define DSI_UNIT_INTERVAL_2 0x6
+
+#define PRIMARY_DISPLAY_ID 0
+#define SECONDARY_DISPLAY_ID 1
+#define TERTIARY_DISPLAY_ID 2
+
+static bool rotate_main = true;
+
+static int generic_platform_enable(struct mcde_display_device *dev)
+{
+ struct mcde_display_generic_platform_data *pdata =
+ dev->dev.platform_data;
+
+ dev_dbg(&dev->dev, "%s: Reset & power on generic display\n", __func__);
+
+ if (pdata->regulator) {
+ if (regulator_enable(pdata->regulator) < 0) {
+ dev_err(&dev->dev, "%s:Failed to enable regulator\n"
+ , __func__);
+ return -EINVAL;
+ }
+ }
+
+ gpio_direction_output(pdata->reset_gpio,
+ !pdata->reset_high);
+ if (pdata->reset_gpio)
+ gpio_set_value(pdata->reset_gpio, pdata->reset_high);
+ mdelay(pdata->reset_delay);
+ if (pdata->reset_gpio)
+ gpio_set_value(pdata->reset_gpio, !pdata->reset_high);
+
+ return 0;
+}
+
+static int generic_platform_disable(struct mcde_display_device *dev)
+{
+ struct mcde_display_generic_platform_data *pdata =
+ dev->dev.platform_data;
+
+ dev_dbg(&dev->dev, "%s:Reset & power off generic display\n", __func__);
+
+ if (pdata->regulator) {
+ if (regulator_disable(pdata->regulator) < 0) {
+ dev_err(&dev->dev, "%s:Failed to disable regulator\n"
+ , __func__);
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+#ifdef CONFIG_DISPLAY_GENERIC_DSI_PRIMARY
+static struct mcde_port port0 = {
+ .type = MCDE_PORTTYPE_DSI,
+ .mode = MCDE_PORTMODE_CMD,
+ .pixel_format = MCDE_PORTPIXFMT_DSI_24BPP,
+ .ifc = 1,
+ .link = 0,
+#ifdef CONFIG_DISPLAY_GENERIC_DSI_PRIMARY_AUTO_SYNC
+ .sync_src = MCDE_SYNCSRC_OFF,
+ .update_auto_trig = true,
+#else
+ .sync_src = MCDE_SYNCSRC_BTA,
+ .update_auto_trig = false,
+#endif
+ .phy = {
+ .dsi = {
+ .virt_id = 0,
+ .num_data_lanes = 2,
+ .ui = DSI_UNIT_INTERVAL_0,
+ .clk_cont = false,
+ },
+ },
+};
+
+struct mcde_display_generic_platform_data generic_display0_pdata = {
+ .reset_gpio = MOP500_EGPIO(15),
+ .reset_delay = 1,
+ .regulator_id = "v-display",
+ .min_supply_voltage = 2500000, /* 2.5V */
+ .max_supply_voltage = 2700000 /* 2.7V */
+};
+
+struct mcde_display_device generic_display0 = {
+ .name = "mcde_disp_generic",
+ .id = PRIMARY_DISPLAY_ID,
+ .port = &port0,
+ .chnl_id = MCDE_CHNL_A,
+ .fifo = MCDE_FIFO_C0,
+ .default_pixel_format = MCDE_OVLYPIXFMT_RGB565,
+ .native_x_res = 864,
+ .native_y_res = 480,
+#ifdef CONFIG_DISPLAY_GENERIC_DSI_PRIMARY_VSYNC
+ .synchronized_update = true,
+#else
+ .synchronized_update = false,
+#endif
+ /* TODO: Remove rotation buffers once ESRAM driver is completed */
+ .rotbuf1 = U8500_ESRAM_BASE + 0x20000 * 4,
+ .rotbuf2 = U8500_ESRAM_BASE + 0x20000 * 4 + 0x10000,
+ .dev = {
+ .platform_data = &generic_display0_pdata,
+ },
+ .platform_enable = generic_platform_enable,
+ .platform_disable = generic_platform_disable,
+};
+#endif /* CONFIG_DISPLAY_GENERIC_DSI_PRIMARY */
+
+
+static struct fb_info *fbs[1] = { NULL};
+static struct mcde_display_device *displays[1] = { NULL};
+/*
+* This function will create the framebuffer for the display that is registered.
+*/
+static int display_postregistered_callback(struct notifier_block *nb,
+ unsigned long event, void *dev)
+{
+ struct mcde_display_device *ddev = dev;
+ u16 width, height;
+ u16 virtual_width, virtual_height;
+ u32 rotate = FB_ROTATE_UR;
+
+ if (event != MCDE_DSS_EVENT_DISPLAY_REGISTERED)
+ return 0;
+
+ if (ddev->id < PRIMARY_DISPLAY_ID || ddev->id >= ARRAY_SIZE(fbs))
+ return 0;
+
+ mcde_dss_get_native_resolution(ddev, &width, &height);
+
+ if (ddev->id == PRIMARY_DISPLAY_ID && rotate_main) {
+ swap(width, height);
+#ifdef CONFIG_DISPLAY_GENERIC_DSI_PRIMARY_ROTATE_180_DEGREES
+ rotate = FB_ROTATE_CCW;
+#else
+ rotate = FB_ROTATE_CW;
+#endif
+ }
+
+ virtual_width = width;
+ virtual_height = height * 2;
+#ifdef CONFIG_DISPLAY_GENERIC_DSI_PRIMARY_AUTO_SYNC
+ if (ddev->id == PRIMARY_DISPLAY_ID)
+ virtual_height = height;
+#endif
+
+ /* Create frame buffer */
+ fbs[ddev->id] = mcde_fb_create(ddev,
+ width, height,
+ virtual_width, virtual_height,
+ ddev->default_pixel_format,
+ rotate);
+
+ if (IS_ERR(fbs[ddev->id]))
+ pr_warning("Failed to create fb for display %s\n", ddev->name);
+ else
+ pr_info("Framebuffer created (%s)\n", ddev->name);
+
+ return 0;
+}
+
+static struct notifier_block display_nb = {
+ .notifier_call = display_postregistered_callback,
+};
+
+
+int __init init_display_devices(void)
+{
+ int ret;
+
+ ret = mcde_dss_register_notifier(&display_nb);
+ if (ret)
+ pr_warning("Failed to register dss notifier\n");
+
+#ifdef CONFIG_DISPLAY_GENERIC_DSI_PRIMARY
+ ret = mcde_display_device_register(&generic_display0);
+ if (ret)
+ pr_warning("Failed to register generic display device 0\n");
+ displays[0] = &generic_display0;
+#endif
+
+ return ret;
+}
+
+module_init(init_display_devices);
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 1187f1f..8b1ecee 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -9,6 +9,20 @@
*/
#include <linux/kernel.h>
#include <linux/regulator/machine.h>
+#include <linux/platform_device.h>
+
+#include <mach/devices.h>
+
+
+#define AB8500_VAUXN_LDO_MIN_VOLTAGE (1100000)
+#define AB8500_VAUXN_LDO_MAX_VOLTAGE (3300000)
+
+static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
+ {
+ .dev = NULL,
+ .supply = "v-display",
+ },
+};
/* supplies to the display/camera */
static struct regulator_init_data ab8500_vaux1_regulator = {
@@ -19,6 +33,8 @@ static struct regulator_init_data ab8500_vaux1_regulator = {
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
REGULATOR_CHANGE_STATUS,
},
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
+ .consumer_supplies = ab8500_vaux1_consumers,
};
/* supplies to the on-board eMMC */
@@ -92,10 +108,22 @@ static struct regulator_init_data ab8500_vintcore_init = {
};
/* supply for U8500 CSI/DSI, VANA LDO */
+#define AB8500_VANA_REGULATOR_MIN_VOLTAGE (0)
+#define AB8500_VANA_REGULATOR_MAX_VOLTAGE (1200000)
+
+static struct regulator_consumer_supply ab8500_vana_consumers[] = {
+ {
+ .dev_name = "mcde",
+ .supply = "v-ana",
+ },
+};
+
static struct regulator_init_data ab8500_vana_init = {
.constraints = {
.name = "V-CSI/DSI",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
+ .consumer_supplies = ab8500_vana_consumers,
};
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index e6e3e82..7c90a50 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -303,6 +303,9 @@ static struct platform_device *platform_devs[] __initdata = {
&ux500_i2c2_device,
&ux500_i2c3_device,
&ux500_ske_keypad_device,
+#ifdef CONFIG_FB_MCDE
+ &ux500_mcde_device,
+#endif
};
static void __init u8500_init_machine(void)
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index a090208..1017fdc 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -12,11 +12,15 @@
#include <linux/gpio.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl022.h>
+#include <linux/delay.h>
+
+#include <video/mcde/mcde.h>
#include <plat/ste_dma40.h>
#include <mach/hardware.h>
#include <mach/setup.h>
+#include <mach/prcmu.h>
#include "ste-dma40-db8500.h"
@@ -379,3 +383,67 @@ struct platform_device ux500_ske_keypad_device = {
.num_resources = ARRAY_SIZE(keypad_resources),
.resource = keypad_resources,
};
+static struct resource mcde_resources[] = {
+ [0] = {
+ .name = MCDE_IO_AREA,
+ .start = U8500_MCDE_BASE,
+ .end = U8500_MCDE_BASE + 0x1000 - 1, /*TODO: Fix size*/
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = MCDE_IO_AREA,
+ .start = U8500_DSI_LINK1_BASE,
+ .end = U8500_DSI_LINK1_BASE + U8500_DSI_LINK_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .name = MCDE_IO_AREA,
+ .start = U8500_DSI_LINK2_BASE,
+ .end = U8500_DSI_LINK2_BASE + U8500_DSI_LINK_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [3] = {
+ .name = MCDE_IO_AREA,
+ .start = U8500_DSI_LINK3_BASE,
+ .end = U8500_DSI_LINK3_BASE + U8500_DSI_LINK_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [4] = {
+ .name = MCDE_IRQ,
+ .start = IRQ_DISP,
+ .end = IRQ_DISP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static int mcde_platform_enable(void)
+{
+ return prcmu_mcde_enable();
+}
+
+static int mcde_platform_disable(void)
+{
+ return prcmu_mcde_disable();
+}
+
+static struct mcde_platform_data mcde_pdata = {
+ .num_dsilinks = 3,
+ .outmux = { 0, 3, 0, 0, 0 },
+ .syncmux = 0x01,
+ .regulator_id = "v-ana",
+ .clock_dsi_id = "hdmi",
+ .clock_dsi_lp_id = "tv",
+ .clock_mcde_id = "mcde",
+ .platform_enable = mcde_platform_enable,
+ .platform_disable = mcde_platform_disable,
+};
+
+struct platform_device ux500_mcde_device = {
+ .name = "mcde",
+ .id = -1,
+ .dev = {
+ .platform_data = &mcde_pdata,
+ },
+ .num_resources = ARRAY_SIZE(mcde_resources),
+ .resource = mcde_resources,
+};
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index f07d098..4acb632 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -142,4 +142,11 @@
#define U8500_GPIOBANK7_BASE (U8500_GPIO2_BASE + 0x80)
#define U8500_GPIOBANK8_BASE U8500_GPIO3_BASE
+#define U8500_DSI_LINK_SIZE 0x1000
+#define U8500_DSI_LINK1_BASE U8500_MCDE_BASE
+#define U8500_DSI_LINK2_BASE (U8500_DSI_LINK1_BASE + U8500_DSI_LINK_SIZE)
+#define U8500_DSI_LINK3_BASE (U8500_DSI_LINK2_BASE + U8500_DSI_LINK_SIZE)
+#define U8500_DSI_LINK_COUNT 0x3
+
+
#endif
diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h
index b91a4d1..58fbb34 100644
--- a/arch/arm/mach-ux500/include/mach/devices.h
+++ b/arch/arm/mach-ux500/include/mach/devices.h
@@ -19,6 +19,7 @@ extern struct amba_device ux500_uart0_device;
extern struct amba_device ux500_uart1_device;
extern struct amba_device ux500_uart2_device;
+extern struct platform_device ux500_mcde_device;
extern struct platform_device ux500_i2c1_device;
extern struct platform_device ux500_i2c2_device;
extern struct platform_device ux500_i2c3_device;
diff --git a/arch/arm/mach-ux500/include/mach/prcmu-regs.h b/arch/arm/mach-ux500/include/mach/prcmu-regs.h
index 8885f39..1fc419e 100644
--- a/arch/arm/mach-ux500/include/mach/prcmu-regs.h
+++ b/arch/arm/mach-ux500/include/mach/prcmu-regs.h
@@ -80,6 +80,7 @@
/* ePOD and memory power signal control registers */
#define PRCM_EPOD_C_SET (_PRCMU_BASE + 0x410)
+#define PRCM_EPOD_C_CLR (_PRCMU_BASE + 0x414)
#define PRCM_SRAM_LS_SLEEP (_PRCMU_BASE + 0x304)
/* Debug power control unit registers */
diff --git a/arch/arm/mach-ux500/include/mach/prcmu.h b/arch/arm/mach-ux500/include/mach/prcmu.h
index 549843f..ee00a9c 100644
--- a/arch/arm/mach-ux500/include/mach/prcmu.h
+++ b/arch/arm/mach-ux500/include/mach/prcmu.h
@@ -12,4 +12,7 @@
int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+int prcmu_mcde_enable(void);
+int prcmu_mcde_disable(void);
+
#endif /* __MACH_PRCMU_H */
diff --git a/arch/arm/mach-ux500/prcmu.c b/arch/arm/mach-ux500/prcmu.c
index 293274d..33b7827 100644
--- a/arch/arm/mach-ux500/prcmu.c
+++ b/arch/arm/mach-ux500/prcmu.c
@@ -11,6 +11,7 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/completion.h>
#include <linux/jiffies.h>
@@ -37,6 +38,34 @@
#define I2C_READ(slave) (((slave) << 1) | BIT(0))
#define I2C_STOP_EN BIT(3)
+/*
+* Used by MCDE to setup all necessary PRCMU registers
+*/
+#define PRCMU_CLAMP_DSS_DSIPLL 0x00600C00
+#define PRCMU_CLAMP_DSIPLL 0x00400800
+#define PRCMU_RESET_DSS_DSIPLL 0x0000400C
+#define PRCMU_RESET_DSIPLL 0x00004000
+#define PRCMU_ENABLE_DSS_MEM 0x00200000
+#define PRCMU_ENABLE_DSS_LOGIC 0x00100000
+#define PRCMU_DSS_SLEEP_OUTPUT_MASK 0x400
+#define PRCMU_UNCLAMP_DSS_DSIPLL 0x00600C00
+#define PRCMU_UNCLAMP_DSIPLL 0x00400800
+#define PRCMU_POWER_ON_DSI 0x00008000
+
+#define PRCMU_DSI_CLOCK_SETTING 0x00000148
+#define PRCMU_DSI_LP_CLOCK_SETTING 0x00000F00
+#define PRCMU_PLLDSI_FREQ_SETTING 0x00020123
+
+#define PRCMU_ENABLE_PLLDSI 0x00000001
+#define PRCMU_DISABLE_PLLDSI 0x00000000
+#define PRCMU_RELEASE_RESET_DSS 0x0000400C
+#define PRCMU_RELEASE_RESET_DSI 0x00004000
+#define PRCMU_DSI_PLLOUT_SEL_SETTING 0x00000202
+#define PRCMU_ENABLE_ESCAPE_CLOCK 0x07010101
+#define PRCMU_DSI_RESET_SW 0x00000007
+
+#define PRCMU_MCDE_DELAY 10
+
enum ack_mb5_status {
I2C_WR_OK = 0x01,
I2C_RD_OK = 0x02,
@@ -145,6 +174,106 @@ unlock_and_return:
}
EXPORT_SYMBOL(prcmu_abb_write);
+static void mcde_epod_enable(void)
+{
+ /* Power on DSS mem */
+ writel(PRCMU_ENABLE_DSS_MEM, PRCM_EPOD_C_SET);
+ mdelay(PRCMU_MCDE_DELAY);
+ /* Power on DSS logic */
+ writel(PRCMU_ENABLE_DSS_LOGIC, PRCM_EPOD_C_SET);
+ mdelay(PRCMU_MCDE_DELAY);
+}
+
+static void mcde_epod_disable(void)
+{
+ /* Power off DSS mem */
+ writel(PRCMU_ENABLE_DSS_MEM, PRCM_EPOD_C_CLR);
+ mdelay(PRCMU_MCDE_DELAY);
+ /* Power off DSS logic */
+ writel(PRCMU_ENABLE_DSS_LOGIC, PRCM_EPOD_C_CLR);
+ mdelay(PRCMU_MCDE_DELAY);
+}
+
+int prcmu_mcde_enable(void)
+{
+ u32 temp;
+
+ /* Clamp DSS out, DSIPLL in/out, (why not DSS input?) */
+ writel(PRCMU_CLAMP_DSS_DSIPLL, PRCM_MMIP_LS_CLAMP_SET);
+ mdelay(PRCMU_MCDE_DELAY);
+
+ /* Enable DSS_M_INITN, DSS_L_RESETN, DSIPLL_RESETN resets */
+ writel(PRCMU_RESET_DSS_DSIPLL, PRCM_APE_RESETN_CLR);
+ mdelay(PRCMU_MCDE_DELAY);
+
+ mcde_epod_enable();
+
+ /* Release DSS_SLEEP */
+ temp = readl(PRCM_SRAM_LS_SLEEP);
+ writel(temp & ~PRCMU_DSS_SLEEP_OUTPUT_MASK, PRCM_SRAM_LS_SLEEP);
+ mdelay(PRCMU_MCDE_DELAY);
+
+ /* Unclamp DSS out, DSIPLL in/out, (why not DSS input?) */
+ writel(PRCMU_UNCLAMP_DSS_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR);
+ mdelay(PRCMU_MCDE_DELAY);
+
+ /* HDMI and TVCLK Should be handled somewhere else */
+ writel(PRCMU_DSI_CLOCK_SETTING, PRCM_HDMICLK_MGT);
+ mdelay(PRCMU_MCDE_DELAY);
+
+ writel(PRCMU_DSI_LP_CLOCK_SETTING, PRCM_TVCLK_MGT);
+ mdelay(PRCMU_MCDE_DELAY);
+
+ writel(PRCMU_PLLDSI_FREQ_SETTING, PRCM_PLLDSI_FREQ);
+ mdelay(PRCMU_MCDE_DELAY);
+ /* Start DSI PLL */
+ writel(PRCMU_ENABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
+ mdelay(PRCMU_MCDE_DELAY);
+
+ /* Release DSS_M_INITN, DSS_L_RESETN, DSIPLL_RESETN */
+ writel(PRCMU_RELEASE_RESET_DSS, PRCM_APE_RESETN_SET);
+ mdelay(PRCMU_MCDE_DELAY);
+
+ writel(PRCMU_DSI_PLLOUT_SEL_SETTING, PRCM_DSI_PLLOUT_SEL);
+ mdelay(PRCMU_MCDE_DELAY);
+
+ writel(PRCMU_ENABLE_ESCAPE_CLOCK, PRCM_DSITVCLK_DIV);
+ mdelay(PRCMU_MCDE_DELAY);
+ /* Release DSI reset 0/1/2 */
+ writel(PRCMU_DSI_RESET_SW, PRCM_DSI_SW_RESET);
+ mdelay(PRCMU_MCDE_DELAY);
+ return 0;
+}
+
+int prcmu_mcde_disable(void)
+{
+ u32 temp;
+
+ writel(PRCMU_DISABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
+ mdelay(PRCMU_MCDE_DELAY);
+
+ /* Clamp DSS out, DSIPLL in/out, (why not DSS input?) */
+ writel(PRCMU_CLAMP_DSS_DSIPLL, PRCM_MMIP_LS_CLAMP_SET);
+ mdelay(PRCMU_MCDE_DELAY);
+
+ /* Release DSS_SLEEP */
+ temp = readl(PRCM_SRAM_LS_SLEEP);
+ writel(temp & ~PRCMU_DSS_SLEEP_OUTPUT_MASK, PRCM_SRAM_LS_SLEEP);
+ mdelay(PRCMU_MCDE_DELAY);
+
+ /* Disable DSS_M_INITN, DSS_L_RESETN, DSIPLL_RESETN resets */
+ writel(PRCMU_RESET_DSS_DSIPLL, PRCM_APE_RESETN_CLR);
+ mdelay(PRCMU_MCDE_DELAY);
+
+ mcde_epod_disable();
+
+ /* Unclamp DSS out, DSIPLL in/out, (why not DSS input?) */
+ writel(PRCMU_UNCLAMP_DSS_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR);
+ mdelay(PRCMU_MCDE_DELAY);
+
+ return 0;
+}
+
static void read_mailbox_0(void)
{
writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR);
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
