Hi Randy,
Good catches, thanks for your work.
Randy Dunlap <rdunlap@xxxxxxxxxxxxx> writes:
> Fix spelling mistakes as reported by codespell.
Acked-by: Krzysztof Hałasa <khalasa@xxxxxxx>
> --- a/drivers/media/i2c/ar0521.c
> +++ b/drivers/media/i2c/ar0521.c
> @@ -314,7 +314,7 @@ static void ar0521_calc_pll(struct ar052
> * In the clock tree:
> * MIPI_CLK = PIXEL_CLOCK * bpp / 2 / 2
> *
> - * Generic pixel_rate to bus clock frequencey equation:
> + * Generic pixel_rate to bus clock frequency equation:
> * MIPI_CLK = V4L2_CID_PIXEL_RATE * bpp / lanes / 2
> *
> * From which we derive the PIXEL_CLOCK to use in the clock tree:
> @@ -327,7 +327,7 @@ static void ar0521_calc_pll(struct ar052
> *
> * TODO: in case we have less data lanes we have to reduce the desired
> * VCO not to exceed the limits specified by the datasheet and
> - * consequentially reduce the obtained pixel clock.
> + * consequently reduce the obtained pixel clock.
> */
> pixel_clock = AR0521_PIXEL_CLOCK_RATE * 2 / sensor->lane_count;
> bpp = ar0521_code_to_bpp(sensor);
> @@ -806,7 +806,7 @@ static const struct initial_reg {
> REGS(be(0x3F00),
> be(0x0017), /* 3F00: BM_T0 */
> be(0x02DD), /* 3F02: BM_T1 */
> - /* 3F04: if Ana_gain less than 2, use noise_floor0, multipl */
> + /* 3F04: if Ana_gain less than 2, use noise_floor0, multiply */
> be(0x0020),
> /* 3F06: if Ana_gain between 4 and 7, use noise_floor2 and */
> be(0x0040),
>
>
--
Krzysztof "Chris" Hałasa
Sieć Badawcza Łukasiewicz
Przemysłowy Instytut Automatyki i Pomiarów PIAP
Al. Jerozolimskie 202, 02-486 Warszawa
