please try this patch http://linuxdvb.org.ru/wbb/index.php?page=Thread&postID=17602#post17602 for s2-liplianin drivers > I have recently purchased Proftuners S2-8000 PCI-e card which consist of : > > * CX23885 pci-e interface > * STB6100 Frontend > * STV0900 Demodulator > > Vendor company supposed that card has Linux support via additional > patch in their support page. I applied patch to v4l-dvb and > s2-liplianin repositories. Patched source compiled and modules loaded > successfully, but it didn't work properly. I got mass of error > messages below, during launching VDR application. > > Insructions: http://www.proftuners.com/driver8000.html > Patch: http://www.proftuners.com/sites/default/files/prof8000.patch > > kernel.log > ----------------------------------- > stv0900_search: > stv0900_algo > stv0900_set_symbol_rate: Mclk 4500000, SR 1000000, Dmd 0 > stv0900_set_tuner: Frequency=1146000 > stv0900_set_tuner: Bandwidth=72000000 > stv0900_algo: NO AGC1, POWERI, POWERQ > Search Fail > stv0900_read_status: > stv0900_status: locked = 0 > stv0900_get_mclk_freq: Calculated Mclk = 4500000 > TS bitrate = 0 Mbit/sec > DEMOD LOCK FAIL > stv0900_search: > stv0900_algo > stv0900_set_symbol_rate: Mclk 4500000, SR 1000000, Dmd 0 > stv0900_set_tuner: Frequency=1146000 > stv0900_set_tuner: Bandwidth=72000000 > stv0900_algo: NO AGC1, POWERI, POWERQ > Search Fail > stv0900_read_status: > stv0900_status: locked = 0 > stv0900_get_mclk_freq: Calculated Mclk = 4500000 > TS bitrate = 0 Mbit/sec > DEMOD LOCK FAIL > ----------------------------------- > > Here is the log messages during card has been detected: > ----------------------------------- > Octt 16 17:27:39 localhost kernel: cx23885 driver version 0.0.2 loaded > Oct 16 17:27:39 localhost kernel: cx23885 0000:03:00.0: PCI INT A -> > Link[LN2A] -> GSI 18 (level, low) -> IRQ 18 > Oct 16 17:27:39 localhost kernel: CORE cx23885[0]: subsystem: > 8000:3034, board: Prof Revolution DVB-S2 8000 [card=29,autodetected] > Oct 16 17:03:34 localhost kernel: cx23885_dvb_register() allocating 1 > frontend(s) > Oct 16 17:03:34 localhost kernel: cx23885[0]: cx23885 based dvb card > Oct 16 17:03:34 localhost kernel: stv0900_init_internal > Oct 16 17:03:34 localhost kernel: stv0900_init_internal: Create New > Internal Structure! > Oct 16 17:03:34 localhost kernel: stv0900_st_dvbs2_single > Oct 16 17:03:34 localhost kernel: stv0900_stop_all_s2_modcod > Oct 16 17:03:34 localhost kernel: stv0900_activate_s2_modcod_single > Oct 16 17:03:34 localhost kernel: stv0900_set_ts_parallel_serial > Oct 16 17:03:34 localhost kernel: stv0900_set_mclk: Mclk set to > 135000000, Quartz = 27000000 > Oct 16 17:03:34 localhost kernel: stv0900_get_mclk_freq: Calculated > Mclk = 4500000 > Oct 16 17:03:34 localhost kernel: stv0900_get_mclk_freq: Calculated > Mclk = 4500000 > Oct 16 17:03:34 localhost kernel: stv0900_attach: Attaching STV0900 > demodulator(0) > Oct 16 17:03:34 localhost kernel: stb6100_attach: Attaching STB6100 > Oct 16 17:03:34 localhost kernel: DVB: registering new adapter (cx23885[0]) > Oct 16 17:03:34 localhost kernel: DVB: registering adapter 0 frontend > 0 (STV0900 frontend)... > Oct 16 17:03:34 localhost kernel: cx23885_dev_checkrevision() Hardware > revision = 0xb0 > Oct 16 17:03:34 localhost kernel: cx23885[0]/0: found at 0000:03:00.0, > rev: 2, irq: 18, latency: 0, mmio: 0xfbe00000 > Oct 16 17:03:34 localhost kernel: cx23885 0000:03:00.0: setting > latency timer to 64 > ----------------------------------- > > Kernel: 2.6.35 x64 > Distro: Archlinux/Gentoo x64 > App: VDR 1.7.16 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
