Hi, I have recently purchased Proftuners S2-8000 PCI-e card which consist of : * CX23885 pci-e interface * STB6100 Frontend * STV0900 Demodulator Vendor company supposed that card has Linux support via additional patch in their support page. I applied patch to v4l-dvb and s2-liplianin repositories. Patched source compiled and modules loaded successfully, but it didn't work properly. I got mass of error messages below, during launching VDR application. Insructions: http://www.proftuners.com/driver8000.html Patch: http://www.proftuners.com/sites/default/files/prof8000.patch kernel.log ----------------------------------- stv0900_search: stv0900_algo stv0900_set_symbol_rate: Mclk 4500000, SR 1000000, Dmd 0 stv0900_set_tuner: Frequency=1146000 stv0900_set_tuner: Bandwidth=72000000 stv0900_algo: NO AGC1, POWERI, POWERQ Search Fail stv0900_read_status: stv0900_status: locked = 0 stv0900_get_mclk_freq: Calculated Mclk = 4500000 TS bitrate = 0 Mbit/sec DEMOD LOCK FAIL stv0900_search: stv0900_algo stv0900_set_symbol_rate: Mclk 4500000, SR 1000000, Dmd 0 stv0900_set_tuner: Frequency=1146000 stv0900_set_tuner: Bandwidth=72000000 stv0900_algo: NO AGC1, POWERI, POWERQ Search Fail stv0900_read_status: stv0900_status: locked = 0 stv0900_get_mclk_freq: Calculated Mclk = 4500000 TS bitrate = 0 Mbit/sec DEMOD LOCK FAIL ----------------------------------- Here is the log messages during card has been detected: ----------------------------------- Octt 16 17:27:39 localhost kernel: cx23885 driver version 0.0.2 loaded Oct 16 17:27:39 localhost kernel: cx23885 0000:03:00.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18 Oct 16 17:27:39 localhost kernel: CORE cx23885[0]: subsystem: 8000:3034, board: Prof Revolution DVB-S2 8000 [card=29,autodetected] Oct 16 17:03:34 localhost kernel: cx23885_dvb_register() allocating 1 frontend(s) Oct 16 17:03:34 localhost kernel: cx23885[0]: cx23885 based dvb card Oct 16 17:03:34 localhost kernel: stv0900_init_internal Oct 16 17:03:34 localhost kernel: stv0900_init_internal: Create New Internal Structure! Oct 16 17:03:34 localhost kernel: stv0900_st_dvbs2_single Oct 16 17:03:34 localhost kernel: stv0900_stop_all_s2_modcod Oct 16 17:03:34 localhost kernel: stv0900_activate_s2_modcod_single Oct 16 17:03:34 localhost kernel: stv0900_set_ts_parallel_serial Oct 16 17:03:34 localhost kernel: stv0900_set_mclk: Mclk set to 135000000, Quartz = 27000000 Oct 16 17:03:34 localhost kernel: stv0900_get_mclk_freq: Calculated Mclk = 4500000 Oct 16 17:03:34 localhost kernel: stv0900_get_mclk_freq: Calculated Mclk = 4500000 Oct 16 17:03:34 localhost kernel: stv0900_attach: Attaching STV0900 demodulator(0) Oct 16 17:03:34 localhost kernel: stb6100_attach: Attaching STB6100 Oct 16 17:03:34 localhost kernel: DVB: registering new adapter (cx23885[0]) Oct 16 17:03:34 localhost kernel: DVB: registering adapter 0 frontend 0 (STV0900 frontend)... Oct 16 17:03:34 localhost kernel: cx23885_dev_checkrevision() Hardware revision = 0xb0 Oct 16 17:03:34 localhost kernel: cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 18, latency: 0, mmio: 0xfbe00000 Oct 16 17:03:34 localhost kernel: cx23885 0000:03:00.0: setting latency timer to 64 ----------------------------------- Kernel: 2.6.35 x64 Distro: Archlinux/Gentoo x64 App: VDR 1.7.16 Thanks. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
