I have tried again. rm -i dvb-fe-tda10048-1.0.fw cp dvb-fe-tda10046.fw dvb-fe-tda10048-1.0.fw Now shutdown and boot dmesg [ 47.724011] tda18271: RF tracking filter calibration complete [ 47.780018] tda829x 8-004b: type set to tda8290+18271 [ 52.756163] saa7133[0]: registered device video0 [v4l2] [ 52.756260] saa7133[0]: registered device vbi0 [ 52.756312] saa7133[0]: registered device radio0 [ 52.774804] saa7134 ALSA driver for DMA sound loaded [ 52.774818] IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 52.774837] saa7133[0]/alsa: saa7133[0] at 0xfcfff800 irq 16 registered as card -2 [ 52.826225] dvb_init() allocating 1 frontend [ 53.176016] tda829x 8-004b: type set to tda8290 [ 53.216128] tda18271 8-0060: attaching existing instance [ 53.216133] DVB: registering new adapter (saa7133[0]) [ 53.216137] DVB: registering adapter 3 frontend 0 (NXP TDA10048HN DVB-T)... [ 53.744012] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... [ 53.744470] saa7134 0000:01:06.0: firmware: requesting dvb-fe-tda10048-1.0.fw [ 53.789956] tda10048_firmware_upload: firmware read 24478 bytes. [ 53.789959] tda10048_firmware_upload: firmware incorrect size [ 53.789963] tda10048_firmware_upload: firmware upload failed [ 55.240026] tda18271_read_regs: ERROR: i2c_transfer returned: -5 [ 55.852518] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 55.852526] tda18271_set_analog_params: error -5 on line 1041 [ 91.004017] Clocksource tsc unstable (delta = -308694953 ns) [ 810.460024] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... [ 810.460039] saa7134 0000:01:06.0: firmware: requesting dvb-fe-tda10048-1.0.fw [ 810.463999] tda10048_firmware_upload: firmware read 24478 bytes. [ 810.464081] tda10048_firmware_upload: firmware incorrect size [ 810.464091] tda10048_firmware_upload: firmware upload failed now my WinTv-1120 works ----- Messaggio originale ----- > Da: Sasha Sirotkin <demiurg@xxxxxxxxxxxxxx> > A: fabio tirapelle <ftirapelle@xxxxxxxx> > Cc: Albin Kauffmann <albin.kauffmann@xxxxxxxxx>; linux-media@xxxxxxxxxxxxxxx > Inviato: Lun 25 ottobre 2010, 18:39:59 > Oggetto: Re: Wintv-HVR-1120 woes > > On Mon, Oct 25, 2010 at 1:51 PM, fabio tirapelle <ftirapelle@xxxxxxxx> wrote: > > > > > >> Da: Albin Kauffmann <albin.kauffmann@xxxxxxxxx> > >> A: Sasha Sirotkin <demiurg@xxxxxxxxxxxxxx> > >> Cc: fabio tirapelle <ftirapelle@xxxxxxxx>; linux-media@xxxxxxxxxxxxxxx > >> Inviato: Lun 25 ottobre 2010, 13:20:13 > >> Oggetto: Re: Wintv-HVR-1120 woes > >> > >> On Mon, Oct 25, 2010 at 9:46 AM, Sasha Sirotkin <demiurg@xxxxxxxxxxxxxx> > >>wrote: > >> > On Mon, Oct 25, 2010 at 9:24 AM, fabio tirapelle <ftirapelle@xxxxxxxx> > >>wrote: > >> >> > >> >> > >> >>> Da: Sasha Sirotkin <demiurg@xxxxxxxxxxxxxx> > >> >>> A: fabio tirapelle <ftirapelle@xxxxxxxx> > >> >>> Cc: Albin Kauffmann <albin.kauffmann@xxxxxxxxx>; > >>linux-media@xxxxxxxxxxxxxxx > >> >>> Inviato: Lun 25 ottobre 2010, 09:18:28 > >> >>> Oggetto: Re: Wintv-HVR-1120 woes > >> >>> > >> >>> On Mon, Oct 25, 2010 at 8:16 AM, fabio tirapelle <ftirapelle@xxxxxxxx> > >>wrote: > >> >>> > My WinTV-HVR-1120 works if I delete dvb-fe-tda10048-1.0.fw and > >> >>> > rename dvb-fe-tda10046.fw in dvb-fe-tda10048-1.0.fw > >> >>> > (see cf "Hauppauge WinTV-HVR-1120 on Unbuntu 10.04" thread). > >> >>> > After reboot my WinTV-HVR-1120 works. Ubuntu recognizes that the > >>firmware > >> >>>isn't > >> >>> > correct and doesn't load the firmware. > >> >>> > >> >>> How come it works without the firmware !? Is it possible that you > >> >>> booted into Windows before that and there is a correct firmware > >> >>> already running in the card ? > >> >> > >> >> No my mediacenter works only on Ubuntu > >> > > >> > This is weird. I will try this workaround tonight. > >> > >> Actually, I think that the dvb-fe-tda10048-1.0.fw firmware is still > >> loaded in the TV card and that this scenario has not changed anything. > >> > >> Fabio, have you tried to reboot several times in order to see if the > >> problem is really fixed? > >> And are you still getting some ERROR messages in `dmesg`? If not, this > >> is good but I don't understand :) > > > > Yes, if "several times" means 3 times. But I think this isn't a good >practice. > > So I have bought another card (NOVA-T-Stick) and I wait for a real solution. > > > > As I have written, the WinTV-1120 did work correctly with Ubunt 9.10. I >haven't > > had problems with this version of Ubuntu. But the linux-firmware-nonfree >package > > > > for Ubuntu 9.10 (karmic) didn't contain the dvb-fe-tda10048-1.0.fw > > (see http://packages.ubuntu.com/karmic/all/linux-firmware-nonfree/filelist) > > The dvb-fe-tda10048-1.0.fw was introduced with lucid > > (see http://packages.ubuntu.com/lucid/all/linux-firmware-nonfree/filelist). > > And now the question. Why without dvb-fe-tda10048-1.0.fw I haven't had >problems > > and now with Ubuntu 10.04 I have problem exactly with this firmware? > > > > So I have renamed the dvb-fe-tda10046.fw in dvb-fe-tda10048-1.0.fw but > > I have seen that Ubuntu checks if the firmware is consistent. > > I did the same and it did not help me much - I get the same errors and > DVB scan does not work. > > > > > In the next two days I cannot post my dmesg, as I cannot access to my > > mediacenter. Tuesday night I will post it. > > > > What you think about my consideration about Ubuntu 9.10 and 10.04? > > > > > >> > >> Cheers, > >> > >> -- > >> Albin Kauffmann > >> > > > > > > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
