> Da: Sasha Sirotkin <demiurg@xxxxxxxxxxxxxx>
> A: fabio tirapelle <ftirapelle@xxxxxxxx>
> Cc: Albin Kauffmann <albin.kauffmann@xxxxxxxxx>; linux-media@xxxxxxxxxxxxxxx
> Inviato: Lun 25 ottobre 2010, 09:18:28
> Oggetto: Re: Wintv-HVR-1120 woes
>
> On Mon, Oct 25, 2010 at 8:16 AM, fabio tirapelle <ftirapelle@xxxxxxxx> wrote:
> > My WinTV-HVR-1120 works if I delete dvb-fe-tda10048-1.0.fw and
> > rename dvb-fe-tda10046.fw in dvb-fe-tda10048-1.0.fw
> > (see cf "Hauppauge WinTV-HVR-1120 on Unbuntu 10.04" thread).
> > After reboot my WinTV-HVR-1120 works. Ubuntu recognizes that the firmware
>isn't
> > correct and doesn't load the firmware.
>
> How come it works without the firmware !? Is it possible that you
> booted into Windows before that and there is a correct firmware
> already running in the card ?
No my mediacenter works only on Ubuntu
>
> > But I know that isn't a good practice.
> >
> >
> > ----- Messaggio originale -----
> >> Da: Sasha Sirotkin <demiurg@xxxxxxxxxxxxxx>
> >> A: Albin Kauffmann <albin.kauffmann@xxxxxxxxx>
> >> Cc: linux-media@xxxxxxxxxxxxxxx
> >> Inviato: Dom 24 ottobre 2010, 23:45:55
> >> Oggetto: Re: Wintv-HVR-1120 woes
> >>
> >> On Sun, Oct 24, 2010 at 10:22 PM, Sasha Sirotkin <demiurg@xxxxxxxxxxxxxx>
> >>wrote:
> >> > On Sun, Oct 24, 2010 at 8:55 PM, Albin Kauffmann
> >> > <albin.kauffmann@xxxxxxxxx> wrote:
> >> >> On Thursday 21 October 2010 23:25:29 Sasha Sirotkin wrote:
> >> >>> I'm having all sorts of troubles with Wintv-HVR-1120 on Ubuntu 10.10
> >> >>> (kernel 2.6.35-22). Judging from what I've seen on the net, including
> >> >>> this mailing list, I'm not the only one not being able to use this
> >> >>> card and no solution seem to exist.
> >> >>>
> >> >>> Problems:
> >> >>> 1. The driver yells various cryptic error messages
> >> >>> ("tda18271_write_regs: [1-0060|M] ERROR: idx = 0x5, len = 1,
> >> >>> i2c_transfer returned: -5", "tda18271_set_analog_params: [1-0060|M]
> >> >>> error -5 on line 1045", etc)
> >> >>
> >> >> yes, indeed :(
> >> >> (cf "Hauppauge WinTV-HVR-1120 on Unbuntu 10.04" thread)
> >> >>
> >> >>> 2. DVB-T scan (using w_scan) produces no results
> >> >>
> >> >> Is this happening after each reboot? As far as I'm concerned, I've
>never
> >>had
> >> >> problems with DVB-T scans.
> >> >>
> >> >
> >> > Almost always. I think I had a lucky reboot or two, but most of the
> >> > time DVB-T scan produces nothing.
> >> >
> >> >>> 3. Analog seems to work, but with very poor quality
> >> >>
> >> >> I just tried to use Analog TV in order to confirm the problem but I
>cannot
> >>get
> >> >> any picture. Maybe I just don't know how to use it. I'm using commands
> > like
> >> >> (I'm located in France):
> >> >>
> >> >> mplayer tv:// -tv driver=v4l2:norm=SECAM:chanlist=france -tvscan
>autostart
> >> >>
> >> >> ... and just get some "snow" on scanned channels.
> >> >> As I might have a problem with my antenna (an interior one), I am going
>to
> >> >> test it under Windows and report back my experience.
> >> >
> >> > I'm using tvtime-scanner
> >> >>
> >> >> Cheers,
> >> >>
> >> >> --
> >> >> Albin Kauffmann
> >> >>
> >> >
> >> >
> >> > I'm trying to downgrade the kernel now to see if it helps
> >> >
> >>
> >> I went back as far as 2.6.30 and I still have this problem. 2.6.29
> >> does not recognize this card at all.
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> >> the body of a message to majordomo@xxxxxxxxxxxxxxx
> >> More majordomo info at http://vger.kernel.org/majordomo-info.html
> >>
> >
> >
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-media" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
