Use the active format height instead of the mode height in
imx219_set_ctrl(). This prepares for dropping the mode field from the
imx219 structure.
The state is retrieved using v4l2_subdev_get_locked_active_state() as
the subdev active state and the control handler share the same lock.
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Reviewed-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
Reviewed-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
---
drivers/media/i2c/imx219.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index bc836cd13ef5..f4f684bda4fa 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -397,13 +397,18 @@ static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
struct imx219 *imx219 =
container_of(ctrl->handler, struct imx219, ctrl_handler);
struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
+ const struct v4l2_mbus_framefmt *format;
+ struct v4l2_subdev_state *state;
int ret = 0;
+ state = v4l2_subdev_get_locked_active_state(&imx219->sd);
+ format = v4l2_subdev_get_pad_format(&imx219->sd, state, 0);
+
if (ctrl->id == V4L2_CID_VBLANK) {
int exposure_max, exposure_def;
/* Update max exposure while meeting expected vblanking */
- exposure_max = imx219->mode->height + ctrl->val - 4;
+ exposure_max = format->height + ctrl->val - 4;
exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
exposure_max : IMX219_EXPOSURE_DEFAULT;
__v4l2_ctrl_modify_range(imx219->exposure,
@@ -443,7 +448,7 @@ static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
break;
case V4L2_CID_VBLANK:
cci_write(imx219->regmap, IMX219_REG_VTS,
- imx219->mode->height + ctrl->val, &ret);
+ format->height + ctrl->val, &ret);
break;
case V4L2_CID_TEST_PATTERN_RED:
cci_write(imx219->regmap, IMX219_REG_TESTP_RED,
--
Regards,
Laurent Pinchart
