From: Fabio Estevam <festevam@xxxxxxx>
The powerdown-gpios description mentions:
"Reference to the GPIO connected to the PWDN pin which is active high."
Improve the example by making powerdown-gpios active-high for consistency.
Signed-off-by: Fabio Estevam <festevam@xxxxxxx>
---
Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
index 5d24edba8f99..5aec65b053af 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
@@ -114,7 +114,7 @@ examples:
compatible = "ovti,ov7725";
reg = <0x21>;
reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_LOW>;
- powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_LOW>;
+ powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_HIGH>;
clocks = <&xclk>;
port {
--
2.34.1
