The IMX219_REG_CSI_LANE_MODE is configured twice, once with a hardcoded
value in the imx219_common_regs registers array, and once with the value
appropriate for the system in imx219_configure_lanes(). The latter is
enough, drop the former.
Fixes: ceddfd4493b3 ("media: i2c: imx219: Support four-lane operation")
Suggested-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
drivers/media/i2c/imx219.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index fbf4c69577f7..d8840aa67c42 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -214,7 +214,6 @@ static const struct cci_reg_sequence imx219_common_regs[] = {
{ IMX219_REG_Y_ODD_INC_A, 1 },
/* Output setup registers */
- { IMX219_REG_CSI_LANE_MODE, IMX219_CSI_2_LANE_MODE },
{ IMX219_REG_DPHY_CTRL, IMX219_DPHY_CTRL_TIMING_AUTO },
{ IMX219_REG_EXCK_FREQ, IMX219_EXCK_FREQ(IMX219_XCLK_FREQ / 1000000) },
};
--
Regards,
Laurent Pinchart
