Hello, my problem is still present in 2.6.36-rc7, the log output is unchanged from rc5. All the best, Richard On Fri, Oct 01, 2010 at 12:19:53AM +0200, Richard Atterer wrote: > [Please CC me, I'm not on the list.] > > Hi, > > after switching from 2.6.34 to 2.6.36-rc5, the sound on my old Hauppauge > analogue TV card has stopped working. Audio out from the TV card is > connected to line-in of my motherboard (Gigabyte EG45M-DS2H) using the > short cable that came with the TV card. Other audio sources (e.g. MP3 > player) are audible when connected to line-in. The TV picture is fine. > > The log messages look really similar for the two kernels. > > 2.6.34 works: > kernel: bttv: driver version 0.9.18 loaded > kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture > kernel: bttv: Bt8xx card found (0). > kernel: bttv0: Bt878 (rev 17) at 0000:03:01.0, irq: 19, latency: 32, mmio: 0xe3600000 > kernel: bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb > kernel: bttv0: using: Hauppauge (bt878) [card=10,autodetected] > kernel: IRQ 19/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs > kernel: bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] > kernel: bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] > kernel: tveeprom 1-0050: Hauppauge model 44354, rev D147, serial# 1234567 > kernel: tveeprom 1-0050: tuner model is LG TP18PSB01D (idx 47, type 28) > kernel: tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04) > kernel: tveeprom 1-0050: audio processor is MSP3415 (idx 6) > kernel: tveeprom 1-0050: has radio > kernel: bttv0: Hauppauge eeprom indicates model#44354 > kernel: bttv0: tuner type=28 > kernel: msp3400 1-0040: MSP3415D-B3 found @ 0x80 (bt878 #0 [sw]) > kernel: msp3400 1-0040: msp3400 supports nicam, mode is autodetect > kernel: tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw]) > kernel: tuner-simple 1-0061: creating new instance > kernel: tuner-simple 1-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D)) > kernel: bttv0: registered device video0 > kernel: bttv0: registered device vbi0 > kernel: bttv0: registered device radio0 > kernel: bttv0: PLL: 28636363 => 35468950 . > kernel: bttv0: PLL: 28636363 => 35468950 . ok > kernel: ok > > 2.6.36-rc5 does not work: > kernel: bttv: driver version 0.9.18 loaded > kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture > kernel: bttv: Bt8xx card found (0). > kernel: bttv0: Bt878 (rev 17) at 0000:03:01.0, irq: 19, latency: 32, mmio: 0xe3600000 > kernel: bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb > kernel: bttv0: using: Hauppauge (bt878) [card=10,autodetected] > kernel: bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] > kernel: bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] > kernel: tveeprom 1-0050: Hauppauge model 44354, rev D147, serial# 1234567 > kernel: tveeprom 1-0050: tuner model is LG TP18PSB01D (idx 47, type 28) > kernel: tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04) > kernel: tveeprom 1-0050: audio processor is MSP3415 (idx 6) > kernel: tveeprom 1-0050: has radio > kernel: bttv0: Hauppauge eeprom indicates model#44354 > kernel: bttv0: tuner type=28 > kernel: msp3400 1-0040: MSP3415D-B3 found @ 0x80 (bt878 #0 [sw]) > kernel: msp3400 1-0040: msp3400 supports nicam, mode is autodetect > kernel: tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw]) > kernel: tuner-simple 1-0061: creating new instance > kernel: tuner-simple 1-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D)) > kernel: bttv0: registered device video0 > kernel: bttv0: registered device vbi0 > kernel: bttv0: registered device radio0 > kernel: bttv0: PLL: 28636363 => 35468950 . ok > > The only real change is that the IRQF_DISABLED warning is gone. -- __ , | ) /| Richard Atterer | \/ | http://atterer.org -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
