[Please CC me, I'm not on the list.] Hi, after switching from 2.6.34 to 2.6.36-rc5, the sound on my old Hauppauge analogue TV card has stopped working. Audio out from the TV card is connected to line-in of my motherboard (Gigabyte EG45M-DS2H) using the short cable that came with the TV card. Other audio sources (e.g. MP3 player) are audible when connected to line-in. The TV picture is fine. The log messages look really similar for the two kernels. 2.6.34 works: kernel: bttv: driver version 0.9.18 loaded kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture kernel: bttv: Bt8xx card found (0). kernel: bttv0: Bt878 (rev 17) at 0000:03:01.0, irq: 19, latency: 32, mmio: 0xe3600000 kernel: bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb kernel: bttv0: using: Hauppauge (bt878) [card=10,autodetected] kernel: IRQ 19/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs kernel: bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] kernel: bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] kernel: tveeprom 1-0050: Hauppauge model 44354, rev D147, serial# 1234567 kernel: tveeprom 1-0050: tuner model is LG TP18PSB01D (idx 47, type 28) kernel: tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04) kernel: tveeprom 1-0050: audio processor is MSP3415 (idx 6) kernel: tveeprom 1-0050: has radio kernel: bttv0: Hauppauge eeprom indicates model#44354 kernel: bttv0: tuner type=28 kernel: msp3400 1-0040: MSP3415D-B3 found @ 0x80 (bt878 #0 [sw]) kernel: msp3400 1-0040: msp3400 supports nicam, mode is autodetect kernel: tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw]) kernel: tuner-simple 1-0061: creating new instance kernel: tuner-simple 1-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D)) kernel: bttv0: registered device video0 kernel: bttv0: registered device vbi0 kernel: bttv0: registered device radio0 kernel: bttv0: PLL: 28636363 => 35468950 . kernel: bttv0: PLL: 28636363 => 35468950 . ok kernel: ok 2.6.36-rc5 does not work: kernel: bttv: driver version 0.9.18 loaded kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture kernel: bttv: Bt8xx card found (0). kernel: bttv0: Bt878 (rev 17) at 0000:03:01.0, irq: 19, latency: 32, mmio: 0xe3600000 kernel: bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb kernel: bttv0: using: Hauppauge (bt878) [card=10,autodetected] kernel: bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] kernel: bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] kernel: tveeprom 1-0050: Hauppauge model 44354, rev D147, serial# 1234567 kernel: tveeprom 1-0050: tuner model is LG TP18PSB01D (idx 47, type 28) kernel: tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04) kernel: tveeprom 1-0050: audio processor is MSP3415 (idx 6) kernel: tveeprom 1-0050: has radio kernel: bttv0: Hauppauge eeprom indicates model#44354 kernel: bttv0: tuner type=28 kernel: msp3400 1-0040: MSP3415D-B3 found @ 0x80 (bt878 #0 [sw]) kernel: msp3400 1-0040: msp3400 supports nicam, mode is autodetect kernel: tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw]) kernel: tuner-simple 1-0061: creating new instance kernel: tuner-simple 1-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D)) kernel: bttv0: registered device video0 kernel: bttv0: registered device vbi0 kernel: bttv0: registered device radio0 kernel: bttv0: PLL: 28636363 => 35468950 . ok The only real change is that the IRQF_DISABLED warning is gone. Cheers, Richard -- __ , | ) /| Richard Atterer | \/ | http://atterer.org -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
