[PATCH WIP RFC v2 0/2] media: uapi: Add V4L2_CID_VTOTAL control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi!

This series adds new controls for the vertical and horizontal total
size. Camera sensors usually have registers regarding the total size and
not the blanking size. Also user space prefers to calculate with total
frame sizes. Therefore, this would simplify implementations on both
sides and could be seen as a replacement or upgrade for V4L2_CID_VBLANK.
Additionally, its value is independent from format changes and therefore
simplifies calculations in user space.

For v2, I added a little bit more documentation and my personal
expectations to 1/2. As I am fairly new to the camera world, they might
be a little bit naive so please correct me if this is utopical. I added
the RFC tag for that reason. However, my intention is to define a
documented behaviour regarding the values and limits which could
basically depend on HTOTAL. Currently, HBLANK is always set to the
minimum in libcamera (I guess to simplify calculations). I think with
HTOTAL, we could always use WIDTH_MAX(all modes) + HBLANK_MIN(WIDTH_MAX)
as default to enable a constant frame size. If the current HTOTAL value
differs from the default, we could infer that the user wants to either
have a higher frame rate, or a higher exposure and could adapt to that.
E.g. use the minimums to get the highest frame rate possible if the
current values are outside of the possible range, or not limiting the
exposure control by the current vertical blanking as it is done now. I
guess this would help the driver to "understand" the needs of the user
space, and therefore allow it to react in a defined and expected manner.

2/2 is a WIP (same as in v1) and currently implements VTOTAL for the
imx290, basically extending the current V4L2_CID_VBLANK implementation.

Thanks Dave for the feedback, insights and the examples (ov5647,
ov9282). I might need some time to skim through the data sheets to learn
why they do stuff like it is done now.

---
Changes in v2:
- 1/2: add HTOTAL
- 1/2: add documentation about expectations
- Link to v1: https://lore.kernel.org/r/20230609-v4l2-vtotal-v1-0-4b7dee7e073e@xxxxxxxxxxx

---
Benjamin Bara (2):
      media: uapi: Add V4L2_CID_{V,H}TOTAL controls
      media: i2c: imx290: Add support for V4L2_CID_VTOTAL

 Documentation/driver-api/media/camera-sensor.rst   | 11 ++++-
 .../media/v4l/ext-ctrls-image-source.rst           | 16 ++++++++
 drivers/media/i2c/imx290.c                         | 47 ++++++++++++++++------
 drivers/media/v4l2-core/v4l2-ctrls-defs.c          |  2 +
 include/uapi/linux/v4l2-controls.h                 |  2 +
 5 files changed, 64 insertions(+), 14 deletions(-)
---
base-commit: 9561de3a55bed6bdd44a12820ba81ec416e705a7
change-id: 20230609-v4l2-vtotal-eb15d37cafea

Best regards,
-- 
Benjamin Bara <benjamin.bara@xxxxxxxxxxx>




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux