Hi Dave,
Am Freitag, 3. Februar 2023, 09:05:44 CET schrieb Dave Stevenson:
> Hi Alexander
>
> On Fri, 3 Feb 2023 at 07:19, Alexander Stein
>
> <alexander.stein@xxxxxxxxxxxxxxx> wrote:
> > Hi Dave,
> >
> > thanks for the patch.
> >
> > Am Dienstag, 31. Januar 2023, 20:20:12 CET schrieb Dave Stevenson:
> > > The driver exposed V4L2_CID_HBLANK as a read only control to allow
> > > for exposure calculations and determination of the frame rate.
> > >
> > > Convert to a read/write control so that the frame rate can be
> > > controlled.
> > >
> > > Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
> > > ---
> > >
> > > drivers/media/i2c/imx290.c | 33 +++++++++++++++++++--------------
> > > 1 file changed, 19 insertions(+), 14 deletions(-)
> > >
> > > diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> > > index 9ddd6382b127..9006be6e5e7c 100644
> > > --- a/drivers/media/i2c/imx290.c
> > > +++ b/drivers/media/i2c/imx290.c
> > > @@ -47,6 +47,7 @@
> > >
> > > #define IMX290_GAIN
> >
> > IMX290_REG_8BIT(0x3014)
> >
> > > #define IMX290_VMAX
> >
> > IMX290_REG_24BIT(0x3018)
> >
> > > #define IMX290_HMAX
> >
> > IMX290_REG_16BIT(0x301c)
> >
> > > +#define IMX290_HMAX_MAX 0xffff
> > >
> > > #define IMX290_SHS1
> >
> > IMX290_REG_24BIT(0x3020)
> >
> > > #define IMX290_WINWV_OB
> >
> > IMX290_REG_8BIT(0x303a)
> >
> > > #define IMX290_WINPV
> >
> > IMX290_REG_16BIT(0x303c)
> >
> > > @@ -167,7 +168,7 @@ struct imx290_regval {
> > >
> > > struct imx290_mode {
> > >
> > > u32 width;
> > > u32 height;
> > >
> > > - u32 hmax;
> > > + u32 hmax_min;
> > >
> > > u8 link_freq_index;
> > >
> > > const struct imx290_regval *data;
> > >
> > > @@ -410,7 +411,7 @@ static const struct imx290_mode
> > > imx290_modes_2lanes[] =
> > > { {
> > >
> > > .width = 1920,
> > > .height = 1080,
> > >
> > > - .hmax = 2200,
> > > + .hmax_min = 2200,
> > >
> > > .link_freq_index = FREQ_INDEX_1080P,
> > > .data = imx290_1080p_settings,
> > > .data_size = ARRAY_SIZE(imx290_1080p_settings),
> > >
> > > @@ -418,7 +419,7 @@ static const struct imx290_mode
> > > imx290_modes_2lanes[] =
> > > { {
> > >
> > > .width = 1280,
> > > .height = 720,
> > >
> > > - .hmax = 3300,
> > > + .hmax_min = 3300,
> > >
> > > .link_freq_index = FREQ_INDEX_720P,
> > > .data = imx290_720p_settings,
> > > .data_size = ARRAY_SIZE(imx290_720p_settings),
> > >
> > > @@ -429,7 +430,7 @@ static const struct imx290_mode
> > > imx290_modes_4lanes[] =
> > > { {
> > >
> > > .width = 1920,
> > > .height = 1080,
> > >
> > > - .hmax = 2200,
> > > + .hmax_min = 2200,
> > >
> > > .link_freq_index = FREQ_INDEX_1080P,
> > > .data = imx290_1080p_settings,
> > > .data_size = ARRAY_SIZE(imx290_1080p_settings),
> > >
> > > @@ -437,7 +438,7 @@ static const struct imx290_mode
> > > imx290_modes_4lanes[] =
> > > { {
> > >
> > > .width = 1280,
> > > .height = 720,
> > >
> > > - .hmax = 3300,
> > > + .hmax_min = 3300,
> > >
> > > .link_freq_index = FREQ_INDEX_720P,
> > > .data = imx290_720p_settings,
> > > .data_size = ARRAY_SIZE(imx290_720p_settings),
> > >
> > > @@ -686,6 +687,12 @@ static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
> >
> > You will need to remove V4L2_CID_HBLANK on the immediately return check at
> > the beginning of the function. Otherwise this setting will never reach
> > the device.
> What tree are you adding these patches to? I'm basing it on Sakari's
> tree at [1] - he's issued a pull for it, so that should be in 6.3.
Thanks for pointing this out. I'm based on linux-next as I need other patches
for platform support. I've had Laurent's patches included, but only v2 :( my
bad. With v3 included instead this seems to work.
> The only immediate return check at the start of imx290_set_ctrl is
> if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY)
> return 0;
>
> The controls are no longer READ_ONLY, therefore they don't return early.
> There is no case for V4L2_CID_HBLANK.
>
> Does this also account for the difference you're reporting with
> V4L2_CID_VBLANK?
Yes, things look good so far. Thanks
Best regards,
Alexander
> [1]
> https://git.linuxtv.org/sailus/media_tree.git/tree/drivers/media/i2c/imx290
> .c#n567
> > Best regards
> > Alexander
> >
> > > }
> > > break;
> > >
> > > + case V4L2_CID_HBLANK:
> > > + ret = imx290_write(imx290, IMX290_HMAX,
> > > + ctrl->val + imx290->current_mode-
> > >
> > >width,
> > >
> > > + NULL);
> > > + break;
> > > +
> > >
> > > default:
> > > ret = -EINVAL;
> > > break;
> > >
> > > @@ -716,12 +723,14 @@ static void imx290_ctrl_update(struct imx290
> > > *imx290,
> > >
> > > const struct v4l2_mbus_framefmt *format,
> > > const struct imx290_mode *mode)
> > >
> > > {
> > >
> > > - unsigned int hblank = mode->hmax - mode->width;
> > > + unsigned int hblank_min = mode->hmax_min - mode->width;
> > > + unsigned int hblank_max = IMX290_HMAX_MAX - mode->width;
> > >
> > > unsigned int vblank = IMX290_VMAX_DEFAULT - mode->height;
> > >
> > > __v4l2_ctrl_s_ctrl(imx290->link_freq, mode->link_freq_index);
> > >
> > > - __v4l2_ctrl_modify_range(imx290->hblank, hblank, hblank, 1,
> > > hblank);
> > > + __v4l2_ctrl_modify_range(imx290->hblank, hblank_min, hblank_max,
> > > 1,
> > > + hblank_min);
> > >
> > > __v4l2_ctrl_modify_range(imx290->vblank, vblank, vblank, 1,
> > > vblank);
> > >
> > > }
> > >
> > > @@ -778,10 +787,11 @@ static int imx290_ctrl_init(struct imx290 *imx290)
> >
> > ARRAY_SIZE(imx290_test_pattern_menu) - 1,
> >
> > > 0, 0, imx290_test_pattern_menu);
> > >
> > > + /*
> > > + * Actual range will be set from imx290_ctrl_update later in the
> >
> > probe.
> >
> > > + */
> > >
> > > imx290->hblank = v4l2_ctrl_new_std(&imx290->ctrls,
> > > &imx290_ctrl_ops,
> > >
> > > V4L2_CID_HBLANK, 1, 1, 1,
> >
> > 1);
> >
> > > - if (imx290->hblank)
> > > - imx290->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> > >
> > > imx290->vblank = v4l2_ctrl_new_std(&imx290->ctrls,
> > > &imx290_ctrl_ops,
> > >
> > > V4L2_CID_VBLANK, 1, 1, 1,
> >
> > 1);
> >
> > > @@ -850,11 +860,6 @@ static int imx290_start_streaming(struct imx290
> > > *imx290, return ret;
> > >
> > > }
> > >
> > > - ret = imx290_write(imx290, IMX290_HMAX,
> > > imx290->current_mode->hmax,
> > > - NULL);
> > > - if (ret)
> > > - return ret;
> > > -
> > >
> > > /* Apply customized values from user */
> > > ret = __v4l2_ctrl_handler_setup(imx290->sd.ctrl_handler);
> > > if (ret) {
