Hi Alexander
On Fri, 3 Feb 2023 at 07:19, Alexander Stein
<alexander.stein@xxxxxxxxxxxxxxx> wrote:
>
> Hi Dave,
>
> thanks for the patch.
>
> Am Dienstag, 31. Januar 2023, 20:20:12 CET schrieb Dave Stevenson:
> > The driver exposed V4L2_CID_HBLANK as a read only control to allow
> > for exposure calculations and determination of the frame rate.
> >
> > Convert to a read/write control so that the frame rate can be
> > controlled.
> >
> > Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
> > ---
> > drivers/media/i2c/imx290.c | 33 +++++++++++++++++++--------------
> > 1 file changed, 19 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> > index 9ddd6382b127..9006be6e5e7c 100644
> > --- a/drivers/media/i2c/imx290.c
> > +++ b/drivers/media/i2c/imx290.c
> > @@ -47,6 +47,7 @@
> > #define IMX290_GAIN
> IMX290_REG_8BIT(0x3014)
> > #define IMX290_VMAX
> IMX290_REG_24BIT(0x3018)
> > #define IMX290_HMAX
> IMX290_REG_16BIT(0x301c)
> > +#define IMX290_HMAX_MAX 0xffff
> > #define IMX290_SHS1
> IMX290_REG_24BIT(0x3020)
> > #define IMX290_WINWV_OB
> IMX290_REG_8BIT(0x303a)
> > #define IMX290_WINPV
> IMX290_REG_16BIT(0x303c)
> > @@ -167,7 +168,7 @@ struct imx290_regval {
> > struct imx290_mode {
> > u32 width;
> > u32 height;
> > - u32 hmax;
> > + u32 hmax_min;
> > u8 link_freq_index;
> >
> > const struct imx290_regval *data;
> > @@ -410,7 +411,7 @@ static const struct imx290_mode imx290_modes_2lanes[] =
> > { {
> > .width = 1920,
> > .height = 1080,
> > - .hmax = 2200,
> > + .hmax_min = 2200,
> > .link_freq_index = FREQ_INDEX_1080P,
> > .data = imx290_1080p_settings,
> > .data_size = ARRAY_SIZE(imx290_1080p_settings),
> > @@ -418,7 +419,7 @@ static const struct imx290_mode imx290_modes_2lanes[] =
> > { {
> > .width = 1280,
> > .height = 720,
> > - .hmax = 3300,
> > + .hmax_min = 3300,
> > .link_freq_index = FREQ_INDEX_720P,
> > .data = imx290_720p_settings,
> > .data_size = ARRAY_SIZE(imx290_720p_settings),
> > @@ -429,7 +430,7 @@ static const struct imx290_mode imx290_modes_4lanes[] =
> > { {
> > .width = 1920,
> > .height = 1080,
> > - .hmax = 2200,
> > + .hmax_min = 2200,
> > .link_freq_index = FREQ_INDEX_1080P,
> > .data = imx290_1080p_settings,
> > .data_size = ARRAY_SIZE(imx290_1080p_settings),
> > @@ -437,7 +438,7 @@ static const struct imx290_mode imx290_modes_4lanes[] =
> > { {
> > .width = 1280,
> > .height = 720,
> > - .hmax = 3300,
> > + .hmax_min = 3300,
> > .link_freq_index = FREQ_INDEX_720P,
> > .data = imx290_720p_settings,
> > .data_size = ARRAY_SIZE(imx290_720p_settings),
> > @@ -686,6 +687,12 @@ static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
>
> You will need to remove V4L2_CID_HBLANK on the immediately return check at the
> beginning of the function. Otherwise this setting will never reach the device.
What tree are you adding these patches to? I'm basing it on Sakari's
tree at [1] - he's issued a pull for it, so that should be in 6.3.
The only immediate return check at the start of imx290_set_ctrl is
if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY)
return 0;
The controls are no longer READ_ONLY, therefore they don't return early.
There is no case for V4L2_CID_HBLANK.
Does this also account for the difference you're reporting with V4L2_CID_VBLANK?
Dave
[1] https://git.linuxtv.org/sailus/media_tree.git/tree/drivers/media/i2c/imx290.c#n567
> Best regards
> Alexander
>
> > }
> > break;
> >
> > + case V4L2_CID_HBLANK:
> > + ret = imx290_write(imx290, IMX290_HMAX,
> > + ctrl->val + imx290->current_mode-
> >width,
> > + NULL);
> > + break;
> > +
> > default:
> > ret = -EINVAL;
> > break;
> > @@ -716,12 +723,14 @@ static void imx290_ctrl_update(struct imx290 *imx290,
> > const struct v4l2_mbus_framefmt *format,
> > const struct imx290_mode *mode)
> > {
> > - unsigned int hblank = mode->hmax - mode->width;
> > + unsigned int hblank_min = mode->hmax_min - mode->width;
> > + unsigned int hblank_max = IMX290_HMAX_MAX - mode->width;
> > unsigned int vblank = IMX290_VMAX_DEFAULT - mode->height;
> >
> > __v4l2_ctrl_s_ctrl(imx290->link_freq, mode->link_freq_index);
> >
> > - __v4l2_ctrl_modify_range(imx290->hblank, hblank, hblank, 1, hblank);
> > + __v4l2_ctrl_modify_range(imx290->hblank, hblank_min, hblank_max, 1,
> > + hblank_min);
> > __v4l2_ctrl_modify_range(imx290->vblank, vblank, vblank, 1, vblank);
> > }
> >
> > @@ -778,10 +787,11 @@ static int imx290_ctrl_init(struct imx290 *imx290)
> >
> ARRAY_SIZE(imx290_test_pattern_menu) - 1,
> > 0, 0, imx290_test_pattern_menu);
> >
> > + /*
> > + * Actual range will be set from imx290_ctrl_update later in the
> probe.
> > + */
> > imx290->hblank = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
> > V4L2_CID_HBLANK, 1, 1, 1,
> 1);
> > - if (imx290->hblank)
> > - imx290->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> >
> > imx290->vblank = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
> > V4L2_CID_VBLANK, 1, 1, 1,
> 1);
> > @@ -850,11 +860,6 @@ static int imx290_start_streaming(struct imx290
> > *imx290, return ret;
> > }
> >
> > - ret = imx290_write(imx290, IMX290_HMAX, imx290->current_mode->hmax,
> > - NULL);
> > - if (ret)
> > - return ret;
> > -
> > /* Apply customized values from user */
> > ret = __v4l2_ctrl_handler_setup(imx290->sd.ctrl_handler);
> > if (ret) {
>
>
>
>
