Depending on which order userspace makes various v4l2 calls, the sensor
might still be powered down when set_fmt is called.
What should really happen here is delay the writing of the mode-related
registers till streaming is started, but for now use the same quick fix
as the atomisp_ov2680 / atomisp_gc0310 code and call power_up() from
set_fmt() in combination with keeping track of the power-state to avoid
doing the power-up sequence twice.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/staging/media/atomisp/i2c/atomisp-ov2722.c | 12 ++++++++++++
drivers/staging/media/atomisp/i2c/ov2722.h | 2 +-
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/media/atomisp/i2c/atomisp-ov2722.c b/drivers/staging/media/atomisp/i2c/atomisp-ov2722.c
index e09c80d1f9ec..5d2e6e2e72f0 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-ov2722.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-ov2722.c
@@ -528,6 +528,9 @@ static int power_up(struct v4l2_subdev *sd)
return -ENODEV;
}
+ if (dev->power_on == 1)
+ return 0; /* Already on */
+
/* power control */
ret = power_ctrl(sd, 1);
if (ret)
@@ -552,6 +555,7 @@ static int power_up(struct v4l2_subdev *sd)
/* according to DS, 20ms is needed between PWDN and i2c access */
msleep(20);
+ dev->power_on = 1;
return 0;
fail_clk:
@@ -575,6 +579,9 @@ static int power_down(struct v4l2_subdev *sd)
return -ENODEV;
}
+ if (dev->power_on == 0)
+ return 0; /* Already off */
+
ret = dev->platform_data->flisclk_ctrl(sd, 0);
if (ret)
dev_err(&client->dev, "flisclk failed\n");
@@ -592,6 +599,7 @@ static int power_down(struct v4l2_subdev *sd)
if (ret)
dev_err(&client->dev, "vprog failed.\n");
+ dev->power_on = 0;
return ret;
}
@@ -669,6 +677,9 @@ static int ov2722_set_fmt(struct v4l2_subdev *sd,
mutex_lock(&dev->input_lock);
+ /* s_power has not been called yet for std v4l2 clients (camorama) */
+ power_up(sd);
+
dev->pixels_per_line = dev->res->pixels_per_line;
dev->lines_per_frame = dev->res->lines_per_frame;
@@ -959,6 +970,7 @@ static int ov2722_probe(struct i2c_client *client)
return -ENOMEM;
mutex_init(&dev->input_lock);
+ dev->power_on = -1;
dev->res = &ov2722_res_preview[0];
v4l2_i2c_subdev_init(&dev->sd, client, &ov2722_ops);
diff --git a/drivers/staging/media/atomisp/i2c/ov2722.h b/drivers/staging/media/atomisp/i2c/ov2722.h
index 020743a944c4..640d3ffcaa5c 100644
--- a/drivers/staging/media/atomisp/i2c/ov2722.h
+++ b/drivers/staging/media/atomisp/i2c/ov2722.h
@@ -198,7 +198,7 @@ struct ov2722_device {
struct ov2722_resolution *res;
struct camera_sensor_platform_data *platform_data;
- int run_mode;
+ int power_on;
u16 pixels_per_line;
u16 lines_per_frame;
u8 type;
--
2.39.0
