Hi All,
Here is another set of patches resulting from my continued work
on cleaning up / improving the atomisp driver.
The main changes here are power-management related, divided
into 2 sets:
1. Move the pm of the core atomisp device to its own custom PM
domain. We turn the ISP on/off through the P-Unit and when
off the PCI subsystem resume method complains about the PCI
config space not being reachable. Changing to a custom PM
domain fixes the logs getting filled with PCI subsys errors
on every open of a /dev/video# node
2. Except for devices shipped with Android as factory image,
all the DSDTs I have seen have proper ACPI pm code for
the sensors. So we really should be using ACPI pm for this.
This series contains a lot of ov2680 patches, including
reworking the controls (so that control changes can be
delayed to stream on time instead of directly trying to do
i2c writes to the turned off sensor). Basically modernizing
the ov2680 driver a lot (there are still some atomisp-isms left).
And then finally after all the ov2680 cleanups it moves
the ov2680 code over to using runtime-pm + ACPI pm,
dropping all the direct PMIC + clk poking done by the
atomisp_gmin_platform code.
Besides that this also contains quite a few other fixes / cleanups
for things which I encountered during the way and it contains the
start of making the ov2722 driver work. With the changes present
in that driver I get a working (but very dark) stream. I expect
that once I add a proper exposure control this will start working
better.
Regards,
Hans
Arnd Bergmann (1):
media: atomisp: fix videobuf2 Kconfig depenendency
Brent Pappas (3):
media: atomisp: pci: Replace bytes macros with functions
media: atomisp: pci: hive_isp_css_common: host: vmem: Replace SUBWORD
macros with functions
media: atomisp: pci: sh_css: Inline single invocation of macro
STATS_ENABLED()
Hans Verkuil (1):
media: atomisp: use vb2_start_streaming_called()
Hans de Goede (52):
media: atomisp: Remove atomisp_sw_contex struct
media: atomisp: Move power-management over to a custom pm-domain
media: atomisp: Silence "isys dma store at addr, val" debug messages
media: atomisp: Remove non working doorbell check from
punit_ddr_dvfs_enable()
media: atomisp: Remove useless msleep(10) before power-on on BYT
media: atomisp: Remove custom ATOMISP_IOC_ISP_MAKERNOTE ioctl
media: atomisp: Remove custom ATOMISP_IOC_G_SENSOR_MODE_DATA ioctl
media: atomisp: Remove V4L2_CID_BIN_FACTOR_HORZ/_VERT
media: atomisp: Remove no longer used binning info from sensor
resolution info
media: atomisp: Propagate set_fmt() errors in queue_setup()
media: atomisp: Remove deferred firmware loading support
media: atomisp: Check buffer index is in range inside
atomisp_qbuf_wrapper()
media: atomisp: Drop atomisp_init_pipe()
media: atomisp: Remove unnecessary memset(foo, 0, sizeof(foo)) calls
media: atomisp: Only set default_run_mode on first open of a
stream/asd
media: atomisp: Do not turn off sensor when the atomisp-sub-dev does
not own it
media: atomisp: Allow sensor drivers without a s_power callback
media: atomisp: Fix regulator registers on BYT devices with CRC PMIC
media: atomisp: Remove atomisp_gmin_find_subdev()
media: atomisp: Add atomisp_register_sensor_no_gmin() helper
media: atomisp: Fix WARN() when the vb2 start_streaming callback fails
media: atomisp: Drop ffmt local var from atomisp_set_fmt()
media: atomisp: Stop overriding padding w/h to 12 on BYT
media: atomisp: Put sensor ACPI devices in D3 before disable ACPI
power-resources
media: atomisp: Remove isp_subdev_link_setup()
media: Add ovxxxx_16bit_addr_reg_helpers.h
media: atomisp: ov2680: Use the new ovxxxx_16bit_addr_reg_helpers.h
media: atomisp: ov2680: Rework flip ctrls
media: atomisp: ov2680: Drop custom ATOMISP_IOC_S_EXPOSURE support
media: atomisp: ov2680: Add exposure and gain controls
media: atomisp: ov2680: Add test pattern control
media: atomisp: ov2680: Fix window settings and enable window for all
resolutions
media: atomisp: ov2680: Make setting the modes algorithm based
media: atomisp: ov2680: Use defines for fps, lines-per-frame and
skip-frames
media: atomisp: ov2680: Drop unused res member from struct
ov2680_device
media: atomisp: ov2680: Fix ov2680_enum_frame_interval()
media: atomisp: ov2680: Drop v4l2_find_nearest_size() call from
set_fmt()
media: atomisp: ov2680: Drop struct ov2680_resolution /
ov2680_res_preview
media: atomisp: ov2680: Fix frame_size list
media: atomisp: ov2680: Remove unused data-types and defines from
ov2680.h
media: atomisp: ov2680: Drop MAX_FMTS define
media: atomisp: ov2680: Consistently indent define values
media: atomisp: ov2680: Cleanup includes
media: atomisp: ov2680: Delay power-on till streaming is started
media: atomisp: ov2680: Add runtime-pm support
media: atomisp: ov2680: s/dev/sensor/
media: atomisp: ov2680: Use devm_kzalloc() for sensor data struct
media: atomisp: ov2680: Switch over to ACPI powermanagement
media: atomisp: ov2722: Call atomisp_gmin_remove_subdev() on probe
failure
media: atomisp: ov2722: Fix GPIO1 polarity
media: atomisp: ov2722: Don't take the input_lock for try_fmt calls.
media: atomisp: ov2722: Power on sensor from set_fmt() callback
drivers/staging/media/atomisp/Kconfig | 2 +-
.../media/atomisp/i2c/atomisp-gc0310.c | 249 ----
.../media/atomisp/i2c/atomisp-gc2235.c | 176 ---
.../media/atomisp/i2c/atomisp-mt9m114.c | 206 ---
.../media/atomisp/i2c/atomisp-ov2680.c | 1273 +++++------------
.../media/atomisp/i2c/atomisp-ov2722.c | 195 +--
drivers/staging/media/atomisp/i2c/gc0310.h | 10 -
drivers/staging/media/atomisp/i2c/gc2235.h | 31 -
drivers/staging/media/atomisp/i2c/mt9m114.h | 15 -
drivers/staging/media/atomisp/i2c/ov2680.h | 842 ++---------
drivers/staging/media/atomisp/i2c/ov2722.h | 36 +-
.../media/atomisp/i2c/ov5693/atomisp-ov5693.c | 195 ---
.../staging/media/atomisp/i2c/ov5693/ov5693.h | 61 -
.../media/atomisp/include/linux/atomisp.h | 50 -
.../include/linux/atomisp_gmin_platform.h | 2 -
.../atomisp/include/linux/atomisp_platform.h | 11 +-
drivers/staging/media/atomisp/notes.txt | 6 -
.../staging/media/atomisp/pci/atomisp_cmd.c | 90 +-
.../staging/media/atomisp/pci/atomisp_cmd.h | 9 +-
.../staging/media/atomisp/pci/atomisp_fops.c | 89 +-
.../staging/media/atomisp/pci/atomisp_fops.h | 3 +-
.../media/atomisp/pci/atomisp_gmin_platform.c | 118 +-
.../media/atomisp/pci/atomisp_internal.h | 7 +-
.../staging/media/atomisp/pci/atomisp_ioctl.c | 50 +-
.../media/atomisp/pci/atomisp_subdev.c | 169 +--
.../media/atomisp/pci/atomisp_subdev.h | 13 -
.../staging/media/atomisp/pci/atomisp_v4l2.c | 165 +--
.../css_2401_system/host/isys_dma_private.h | 2 -
.../pci/hive_isp_css_common/host/vmem.c | 20 +-
drivers/staging/media/atomisp/pci/sh_css.c | 7 +-
.../staging/media/atomisp/pci/sh_css_params.c | 38 +-
include/media/ovxxxx_16bit_addr_reg_helpers.h | 93 ++
32 files changed, 862 insertions(+), 3371 deletions(-)
create mode 100644 include/media/ovxxxx_16bit_addr_reg_helpers.h
--
2.39.0
