There's no need to configure the data lanes in the runtime PM resume handler. Do so in imx290_start_streaming() instead. Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Reviewed-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx> --- drivers/media/i2c/imx290.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c index c3ffb23104bf..67a2edd38e91 100644 --- a/drivers/media/i2c/imx290.c +++ b/drivers/media/i2c/imx290.c @@ -767,6 +767,9 @@ static int imx290_start_streaming(struct imx290 *imx290, return ret; } + /* Set data lane count */ + imx290_set_data_lanes(imx290); + /* Apply the register values related to current frame format */ format = v4l2_subdev_get_pad_format(&imx290->sd, state, 0); ret = imx290_setup_format(imx290, format); @@ -1074,9 +1077,6 @@ static int imx290_power_on(struct imx290 *imx290) gpiod_set_value_cansleep(imx290->rst_gpio, 0); usleep_range(30000, 31000); - /* Set data lane count */ - imx290_set_data_lanes(imx290); - return 0; } -- Regards, Laurent Pinchart
