Initializing the subdev before runtime PM means that no subdev
initialization can interact with the runtime PM framework. This can be
problematic when modifying controls, as the .s_ctrl() handler commonly
calls pm_runtime_get_if_in_use(). These code paths are not trivial,
making the driver fragile and possibly causing subtle bugs.
To make the subdev initialization more robust, initialize runtime PM
first.
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
drivers/media/i2c/imx290.c | 57 ++++++++++++++++++++++----------------
1 file changed, 33 insertions(+), 24 deletions(-)
diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
index 6a3e93c10fb1..c3ffb23104bf 100644
--- a/drivers/media/i2c/imx290.c
+++ b/drivers/media/i2c/imx290.c
@@ -581,9 +581,7 @@ static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
/*
* Return immediately for controls that don't need to be applied to the
- * device. This includes all controls modified in imx290_ctrl_update(),
- * which is called at probe time before runtime PM is initialized, so
- * we can't proceed to the pm_runtime_get_if_in_use() call below.
+ * device.
*/
switch (ctrl->id) {
case V4L2_CID_LINK_FREQ:
@@ -1054,22 +1052,20 @@ static void imx290_subdev_cleanup(struct imx290 *imx290)
* Power management
*/
-static int imx290_power_on(struct device *dev)
+static int imx290_power_on(struct imx290 *imx290)
{
- struct v4l2_subdev *sd = dev_get_drvdata(dev);
- struct imx290 *imx290 = to_imx290(sd);
int ret;
ret = clk_prepare_enable(imx290->xclk);
if (ret) {
- dev_err(dev, "Failed to enable clock\n");
+ dev_err(imx290->dev, "Failed to enable clock\n");
return ret;
}
ret = regulator_bulk_enable(ARRAY_SIZE(imx290->supplies),
imx290->supplies);
if (ret) {
- dev_err(dev, "Failed to enable regulators\n");
+ dev_err(imx290->dev, "Failed to enable regulators\n");
clk_disable_unprepare(imx290->xclk);
return ret;
}
@@ -1084,20 +1080,33 @@ static int imx290_power_on(struct device *dev)
return 0;
}
-static int imx290_power_off(struct device *dev)
+static void imx290_power_off(struct imx290 *imx290)
{
- struct v4l2_subdev *sd = dev_get_drvdata(dev);
- struct imx290 *imx290 = to_imx290(sd);
-
clk_disable_unprepare(imx290->xclk);
gpiod_set_value_cansleep(imx290->rst_gpio, 1);
regulator_bulk_disable(ARRAY_SIZE(imx290->supplies), imx290->supplies);
+}
+
+static int imx290_runtime_resume(struct device *dev)
+{
+ struct v4l2_subdev *sd = dev_get_drvdata(dev);
+ struct imx290 *imx290 = to_imx290(sd);
+
+ return imx290_power_on(imx290);
+}
+
+static int imx290_runtime_suspend(struct device *dev)
+{
+ struct v4l2_subdev *sd = dev_get_drvdata(dev);
+ struct imx290 *imx290 = to_imx290(sd);
+
+ imx290_power_off(imx290);
return 0;
}
static const struct dev_pm_ops imx290_pm_ops = {
- SET_RUNTIME_PM_OPS(imx290_power_off, imx290_power_on, NULL)
+ SET_RUNTIME_PM_OPS(imx290_runtime_suspend, imx290_runtime_resume, NULL)
};
/* ----------------------------------------------------------------------------
@@ -1276,20 +1285,15 @@ static int imx290_probe(struct i2c_client *client)
if (ret)
return ret;
- /* Initialize the V4L2 subdev. */
- ret = imx290_subdev_init(imx290);
- if (ret)
- return ret;
-
/*
* Enable power management. The driver supports runtime PM, but needs to
* work when runtime PM is disabled in the kernel. To that end, power
* the sensor on manually here.
*/
- ret = imx290_power_on(dev);
+ ret = imx290_power_on(imx290);
if (ret < 0) {
dev_err(dev, "Could not power on the device\n");
- goto err_subdev;
+ return ret;
}
/*
@@ -1303,6 +1307,11 @@ static int imx290_probe(struct i2c_client *client)
pm_runtime_set_autosuspend_delay(dev, 1000);
pm_runtime_use_autosuspend(dev);
+ /* Initialize the V4L2 subdev. */
+ ret = imx290_subdev_init(imx290);
+ if (ret)
+ goto err_pm;
+
/*
* Finally, register the V4L2 subdev. This must be done after
* initializing everything as the subdev can be used immediately after
@@ -1323,12 +1332,12 @@ static int imx290_probe(struct i2c_client *client)
return 0;
+err_subdev:
+ imx290_subdev_cleanup(imx290);
err_pm:
pm_runtime_disable(dev);
pm_runtime_put_noidle(dev);
- imx290_power_off(dev);
-err_subdev:
- imx290_subdev_cleanup(imx290);
+ imx290_power_off(imx290);
return ret;
}
@@ -1346,7 +1355,7 @@ static void imx290_remove(struct i2c_client *client)
*/
pm_runtime_disable(imx290->dev);
if (!pm_runtime_status_suspended(imx290->dev))
- imx290_power_off(imx290->dev);
+ imx290_power_off(imx290);
pm_runtime_set_suspended(imx290->dev);
}
--
Regards,
Laurent Pinchart
