Hi Shravan
On Fri, Jan 13, 2023 at 06:31:33AM +0530, shravan kumar wrote:
> From: Shravan Chippa <shravan.chippa@xxxxxxxxxxxxx>
>
> There are some missing reset reg_mode values for the 3840x2160@60
> resolution. The camera sensor still works in 3840x2160@60 resolution mode
> because of the register reset values. This is an issue when we change the
> modes dynamically. As an example, when we change the mode from 1920x1080@30
> resolution to 3840x2160@60 resoultion then the mode values will be written
^ rougue space
> to the registers from the array mode_3840x2160_regs[] which gives the wrong
> output which is incorrect resolution.
>
> So add the missing reset values to the mode_3840x2160_regs[].
>
> Signed-off-by: Shravan Chippa <shravan.chippa@xxxxxxxxxxxxx>
Not checking the register values as I don't have a datasheet
Reviewed-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
Thanks
j
> ---
> drivers/media/i2c/imx334.c | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/drivers/media/i2c/imx334.c b/drivers/media/i2c/imx334.c
> index ebacba3059b3..40ece08f20f5 100644
> --- a/drivers/media/i2c/imx334.c
> +++ b/drivers/media/i2c/imx334.c
> @@ -166,6 +166,7 @@ static const struct imx334_reg mode_3840x2160_regs[] = {
> {0x3288, 0x21},
> {0x328a, 0x02},
> {0x302c, 0x3c},
> + {0x302d, 0x00},
> {0x302e, 0x00},
> {0x302f, 0x0f},
> {0x3076, 0x70},
> @@ -240,7 +241,26 @@ static const struct imx334_reg mode_3840x2160_regs[] = {
> {0x3794, 0x7a},
> {0x3796, 0xa1},
> {0x3e04, 0x0e},
> + {0x319e, 0x00},
> {0x3a00, 0x01},
> + {0x3a18, 0xbf},
> + {0x3a19, 0x00},
> + {0x3a1a, 0x67},
> + {0x3a1b, 0x00},
> + {0x3a1c, 0x6f},
> + {0x3a1d, 0x00},
> + {0x3a1e, 0xd7},
> + {0x3a1f, 0x01},
> + {0x3a20, 0x6f},
> + {0x3a21, 0x00},
> + {0x3a22, 0xcf},
> + {0x3a23, 0x00},
> + {0x3a24, 0x6f},
> + {0x3a25, 0x00},
> + {0x3a26, 0xb7},
> + {0x3a27, 0x00},
> + {0x3a28, 0x5f},
> + {0x3a29, 0x00},
> };
>
> /* Supported sensor mode configurations */
> --
> 2.34.1
>
