Hi Stefan,
On 11/27/22 6:56 AM, Stefan Wahren wrote:
Hi Umang,
Am 26.11.22 um 17:26 schrieb Umang Jain:
Hi Stefan
On 11/26/22 8:12 PM, Stefan Wahren wrote:
Hi Umang,
Am 21.11.22 um 22:47 schrieb Umang Jain:
This series aims to upport bcm2835-isp from the RPi kernel [1] and
is a
independent subset of earlier series [2] posted to upport CSI-2/CCP2
receiver IP core("Unicam) + the ISP driver found in BCM283x and
compatible
SoCs (namely BCM2711). Unicam is still under active development to
work
with multistream support to get into mainline. Hence only the ISP
driver
will remain the primary area of this series.
thanks for working on this. But honestly i would prefer that vchiq
comes out of staging before adding more features. As Greg said some
time ago staging is not a place to "dump code and run away". These
new files are in the same bad shape as the rest of vc04 before the
clean-up here in staging started.
Certainly, I am not here to do that - but I am still learning the ropes.
no problem.
If the staging issue is becoming a blocker for bcm2835-isp going
upstream, I would be happy to help here! Though I must mention that I
still have limited visibility so my aim would be to chart out a plan
of things needed to be done to get vc04_services out of staging!
The vchiq driver is in staging since 2016, so every step forwards is
good. Unfortunately all of the low hanging fruits has been gathered.
For me the most important, but not to tricky steps to get vchiq out of
staging would be:
* Cleanup logging mechanism
* Get rid of custom function return values
There was already an attempt for this [1]
* Get rid of all non essential global structures and create a proper per
device structure
I agree that VCSM is on the TODO list for vchiq, but this driver is
not necessary for making bcm2835-audio & bcm2835-camera leave
staging. It just binds more resources on a new feature.
bcm2835-camera is the legacy camera stack which probably need to be
dropped from hereon...
I see two TODO files in vc04_services:
./bcm2835-camera/TODO
./interface/TODO
One of the bcm2835-camera TODO points to the vc-sm-cma driver itself.
So that's address in the series. The other remaining one - I will
need to take a deeper look before commenting on it.
The main chunk of TODO are in vc04_services/interfaces/TODO. Doing a
cursory reading of them suggests that these apply to *all*
vc04_services components? Am I right?
Actually these applies just for the interfaces directory. Some of them
could apply to the services, but this is no priority.
By no priority, you mean this doesn't affect the criteria required to
ful-fill to get these out of staging?
Are these are the specific bits of cleanup you are referring to in
your comment?
You mean about bcm2835-isp? There were too many changes to vchiq that
i don't remember them all. The first that come to my mind was those
fancy comment sections which is not kernel coding style. It has been
removed.
No, I don't mean the bcm2835-isp changes (those are upcoming /
out-of-tree still so...). I mean what are the specific bits / points
that needs to be addressed to get vc04_services out of the staging.
You have mentioned it above now, so I'll follow up on those. The many
vchiq changes you referred to above comment (that you don't remember)
are from [1] as well or some other series ?
[1] -
https://lore.kernel.org/linux-staging/20220712181928.17547-1-jslebodn@xxxxxxxxxx/
Unfortuntately i hadn't much time to work on vchiq by myself.
Just my two cents
Stefan
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
