In the probe path, dev_err() can be replace with dev_err_probe()
which will check if error code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@xxxxxxxxxx>
---
drivers/media/i2c/imx274.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/media/i2c/imx274.c b/drivers/media/i2c/imx274.c
index a00761b1e18c..0df515ab2cbf 100644
--- a/drivers/media/i2c/imx274.c
+++ b/drivers/media/i2c/imx274.c
@@ -2060,9 +2060,8 @@ static int imx274_probe(struct i2c_client *client)
imx274->reset_gpio = devm_gpiod_get_optional(dev, "reset",
GPIOD_OUT_HIGH);
if (IS_ERR(imx274->reset_gpio)) {
- if (PTR_ERR(imx274->reset_gpio) != -EPROBE_DEFER)
- dev_err(dev, "Reset GPIO not setup in DT");
- ret = PTR_ERR(imx274->reset_gpio);
+ ret = dev_err_probe(dev, PTR_ERR(imx274->reset_gpio),
+ "Reset GPIO not setup in DT");
goto err_me;
}
--
2.25.1
