In the probe path, dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. It will print error code in a human readable way and simplify the code. Yang Yingliang (13): media: platform: stm32-cec: Switch to use dev_err_probe() helper media: i2c: ad5820: Switch to use dev_err_probe() helper media: i2c: imx274: Switch to use dev_err_probe() helper media: i2c: tc358743: Switch to use dev_err_probe() helper media: platform: mtk_mdp_comp: Switch to use dev_err_probe() helper media: platform: exynos4-is: Switch to use dev_err_probe() helper media: stm32-dcmi: Switch to use dev_err_probe() helper media: omap3isp: Switch to use dev_err_probe() helper media: xilinx: csi2rxss: Switch to use dev_err_probe() helper media: rc: gpio-ir-recv: Switch to use dev_err_probe() helper media: rc: gpio-ir-tx: Switch to use dev_err_probe() helper media: rc: ir-rx51: Switch to use dev_err_probe() helper media: uvcvideo: Switch to use dev_err_probe() helper drivers/media/cec/platform/stm32/stm32-cec.c | 9 +++---- drivers/media/i2c/ad5820.c | 18 +++++-------- drivers/media/i2c/imx274.c | 5 ++-- drivers/media/i2c/tc358743.c | 9 +++---- .../platform/mediatek/mdp/mtk_mdp_comp.c | 5 ++-- .../platform/samsung/exynos4-is/media-dev.c | 4 +-- drivers/media/platform/st/stm32/stm32-dcmi.c | 27 +++++++------------ drivers/media/platform/ti/omap3isp/isp.c | 3 +-- .../media/platform/xilinx/xilinx-csi2rxss.c | 8 +++--- drivers/media/rc/gpio-ir-recv.c | 10 +++---- drivers/media/rc/gpio-ir-tx.c | 9 +++---- drivers/media/rc/ir-rx51.c | 9 ++----- drivers/media/usb/uvc/uvc_driver.c | 9 +++---- 13 files changed, 41 insertions(+), 84 deletions(-) -- 2.25.1
