On Tue, 2022-08-23 at 10:38 +0300, Laurent Pinchart wrote:
> > # cat /etc/udev/rules.d/50-camera.rules
> > ACTION=="add", SUBSYSTEMS=="usb", ATTRS{idVendor}=="0408", ATTRS{idProduct}=="2090", ATTR{bInterfaceClass}=="01", ATTR{authorized}="0"
> > From syslog:
> > Aug 22 10:28:46 [kernel] usb 3-11.2: new high-speed USB device number 21 using xhci_hcd
> > Aug 22 10:28:46 [kernel] usb 3-11.2: New USB device found, idVendor=0408, idProduct=2090, bcdDevice=21.17
> > Aug 22 10:28:46 [kernel] usb 3-11.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> > Aug 22 10:28:46 [kernel] usb 3-11.2: Product: Astro HD Camera
> > Aug 22 10:28:46 [kernel] usb 3-11.2: Manufacturer: QCM
> > Aug 22 10:28:46 [kernel] usb 3-11.2: Found UVC 1.00 device Astro HD Camera (0408:2090)
> > Aug 22 10:28:46 [kernel] usb 3-11.2: No streaming interface found for terminal 9.
> > Aug 22 10:28:46 [kernel] input: Astro HD Camera: Astro HD Camer as /devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11.2/3-11.2:1.0/input/input41
> > Aug 22 10:28:51 [kernel] usb 3-11.2: 4:1: cannot set freq 48000 to ep 0x84
> > Aug 22 10:28:56 [kernel] usb 3-11.2: 10:3: cannot get min/max values for control 2 (id 10)
> These messages come from the snd-usb-audio module as far as I can tell.
Ok, let's ignore the audio part of that device and get the camera part working.
Why has that udev rule stopped working and does not disable the audio anymore?
Getting audio working would be another issue after solving the video part.
Best regards,
Massimo
