Hi Yassine,
Thanks for the patch.
On Mon, Jul 11, 2022 at 06:40:39PM +0400, Yassine Oudjana wrote:
> From: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
>
> Make the driver get needed regulators on probe and enable/disable
> them on runtime PM callbacks.
>
> Signed-off-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
> ---
> Changes since v1:
> - Reorganize variable declaration
> - Change the power-on delay range to 3000-3500 microseconds.
>
> drivers/media/i2c/ak7375.c | 39 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 39 insertions(+)
>
> diff --git a/drivers/media/i2c/ak7375.c b/drivers/media/i2c/ak7375.c
> index 40b1a4aa846c..c2b2542a0056 100644
> --- a/drivers/media/i2c/ak7375.c
> +++ b/drivers/media/i2c/ak7375.c
> @@ -6,6 +6,7 @@
> #include <linux/i2c.h>
> #include <linux/module.h>
> #include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> #include <media/v4l2-ctrls.h>
> #include <media/v4l2-device.h>
>
> @@ -23,17 +24,32 @@
> */
> #define AK7375_CTRL_STEPS 64
> #define AK7375_CTRL_DELAY_US 1000
> +/*
> + * The vcm takes around 3 ms to power on and start taking
> + * I2C messages. This value was found experimentally due to
> + * lack of documentation.
> + */
> +#define AK7375_POWER_DELAY_US 3000
>
> #define AK7375_REG_POSITION 0x0
> #define AK7375_REG_CONT 0x2
> #define AK7375_MODE_ACTIVE 0x0
> #define AK7375_MODE_STANDBY 0x40
>
> +static const char * const ak7375_supply_names[] = {
> + "vdd",
> + "vio",
> +};
> +
> +#define AK7375_NUM_SUPPLIES ARRAY_SIZE(ak7375_supply_names)
Please drop this, and use ARRAY_SIZE() directly.
> +
> /* ak7375 device structure */
> struct ak7375_device {
> struct v4l2_ctrl_handler ctrls_vcm;
> struct v4l2_subdev sd;
> struct v4l2_ctrl *focus;
> + struct regulator_bulk_data supplies[AK7375_NUM_SUPPLIES];
> +
> /* active or standby mode */
> bool active;
> };
> @@ -133,12 +149,24 @@ static int ak7375_probe(struct i2c_client *client)
> {
> struct ak7375_device *ak7375_dev;
> int ret;
> + int i;
unsigned int, please.
--
Kind regards,
Sakari Ailus
