Re: [PATCH v5 1/6] dt-bindings: media: Add Allwinner A31 ISP bindings documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Paul,

On Tue, Jul 19, 2022 at 12:04:31PM +0200, Paul Kocialkowski wrote:
> Hi Sakari,
> 
> On Sun 17 Jul 22, 11:37, Sakari Ailus wrote:
> > Hi Paul,
> > 
> > On Mon, Jul 04, 2022 at 07:35:18PM +0200, Paul Kocialkowski wrote:
> > > This introduces YAML bindings documentation for the Allwinner A31 Image
> > > Signal Processor (ISP).
> > > 
> > > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
> > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> > > ---
> > >  .../media/allwinner,sun6i-a31-isp.yaml        | 97 +++++++++++++++++++
> > >  1 file changed, 97 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
> > > 
> > > diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
> > > new file mode 100644
> > > index 000000000000..2fda6e05e16c
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
> > > @@ -0,0 +1,97 @@
> > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-isp.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Allwinner A31 Image Signal Processor Driver (ISP) Device Tree Bindings
> > > +
> > > +maintainers:
> > > +  - Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
> > > +
> > > +properties:
> > > +  compatible:
> > > +    enum:
> > > +      - allwinner,sun6i-a31-isp
> > > +      - allwinner,sun8i-v3s-isp
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  interrupts:
> > > +    maxItems: 1
> > > +
> > > +  clocks:
> > > +    items:
> > > +      - description: Bus Clock
> > > +      - description: Module Clock
> > > +      - description: DRAM Clock
> > > +
> > > +  clock-names:
> > > +    items:
> > > +      - const: bus
> > > +      - const: mod
> > > +      - const: ram
> > > +
> > > +  resets:
> > > +    maxItems: 1
> > > +
> > > +  ports:
> > > +    $ref: /schemas/graph.yaml#/properties/ports
> > > +
> > > +    properties:
> > > +      port@0:
> > > +        $ref: /schemas/graph.yaml#/properties/port
> > > +        description: CSI0 input port
> > > +
> > > +      port@1:
> > > +        $ref: /schemas/graph.yaml#/properties/port
> > > +        description: CSI1 input port
> > 
> > Do both support a single PHY with a single data only? If multiple data lanes
> > are supported, please require data-lanes property (on endpoint).
> 
> There's actually no PHY involved here: the ISP drivers gets its video stream
> from these CSI controllers which are the ones interfacing with a MIPI CSI-2
> receiver (on A31/V3 it uses an external D-PHY, on A83T the D-PHY is collocated
> with the controller).
> 
> So I think the data-lanes property is not relevant here.
> 
> What do you think?

Ah, indeed, if it's an internal bus, then data-lanes isn't relevant.

-- 
Sakari Ailus



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux