Hi Sakari,
Am Sonntag, 17. Juli 2022, 16:17:09 CEST schrieb Sakari Ailus:
> Hi Alexander,
>
> Thanks for the set.
>
> On Fri, Jul 15, 2022 at 09:48:57AM +0200, Alexander Stein wrote:
> > Need in case the sensors is supplied by a switchable regulator.
> >
> > Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
> > ---
> > Changes in v2:
> > * Remove error message for failed regulator_bulk_disable()
> > * Rename ov9282_configure_regulators to ov9282_get_regulators
> >
> > drivers/media/i2c/ov9282.c | 39 ++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 39 insertions(+)
> >
> > diff --git a/drivers/media/i2c/ov9282.c b/drivers/media/i2c/ov9282.c
> > index 04fda8222e07..263cdffc558f 100644
> > --- a/drivers/media/i2c/ov9282.c
> > +++ b/drivers/media/i2c/ov9282.c
> > @@ -11,6 +11,7 @@
> >
> > #include <linux/i2c.h>
> > #include <linux/module.h>
> > #include <linux/pm_runtime.h>
> >
> > +#include <linux/regulator/consumer.h>
> >
> > #include <media/v4l2-ctrls.h>
> > #include <media/v4l2-fwnode.h>
> >
> > @@ -55,6 +56,14 @@
> >
> > #define OV9282_REG_MIN 0x00
> > #define OV9282_REG_MAX 0xfffff
> >
> > +static const char * const ov9282_supply_names[] = {
> > + "avdd", /* Analog power */
> > + "dovdd", /* Digital I/O power */
> > + "dvdd", /* Digital core power */
> > +};
> > +
> > +#define OV9282_NUM_SUPPLIES ARRAY_SIZE(ov9282_supply_names)
> > +
> >
> > /**
> >
> > * struct ov9282_reg - ov9282 sensor register
> > * @address: Register address
> >
> > @@ -127,6 +136,7 @@ struct ov9282 {
> >
> > struct media_pad pad;
> > struct gpio_desc *reset_gpio;
> > struct clk *inclk;
> >
> > + struct regulator_bulk_data supplies[OV9282_NUM_SUPPLIES];
> >
> > struct v4l2_ctrl_handler ctrl_handler;
> > struct v4l2_ctrl *link_freq_ctrl;
> > struct v4l2_ctrl *pclk_ctrl;
> >
> > @@ -883,10 +893,18 @@ static int ov9282_power_on(struct device *dev)
> >
> > goto error_reset;
> >
> > }
> >
> > + ret = regulator_bulk_enable(ARRAY_SIZE(ov9282->supplies),
> > ov9282->supplies);
> Please run the set through:
>
> ./scripts/checkpatch.pl --strict --max-line-length=80
Thanks, will be fixed.
> > + if (ret) {
> > + dev_err(dev, "Failed to enable regulators\n");
> > + goto disable_clk;
> > + }
> > +
> >
> > usleep_range(400, 600);
> >
> > return 0;
> >
> > +disable_clk:
> > + clk_disable_unprepare(ov9282->inclk);
> >
> > error_reset:
> > gpiod_set_value_cansleep(ov9282->reset_gpio, 0);
> >
> > @@ -903,6 +921,9 @@ static int ov9282_power_off(struct device *dev)
> >
> > {
> >
> > struct v4l2_subdev *sd = dev_get_drvdata(dev);
> > struct ov9282 *ov9282 = to_ov9282(sd);
> >
> > + int ret;
>
> ret seems to be unused.
You are right, leftover from last cleanup. Will be removed.
Thanks and best regards,
Alexander
> > +
> > + regulator_bulk_disable(ARRAY_SIZE(ov9282->supplies), ov9282-
>supplies);
> >
> > gpiod_set_value_cansleep(ov9282->reset_gpio, 0);
> >
> > @@ -996,6 +1017,18 @@ static int ov9282_init_controls(struct ov9282
> > *ov9282)>
> > return 0;
> >
> > }
> >
> > +static int ov9282_get_regulators(struct ov9282 *ov9282)
> > +{
> > + unsigned int i;
> > +
> > + for (i = 0; i < ARRAY_SIZE(ov9282->supplies); i++)
> > + ov9282->supplies[i].supply = ov9282_supply_names[i];
> > +
> > + return devm_regulator_bulk_get(ov9282->dev,
> > + ARRAY_SIZE(ov9282-
>supplies),
> > + ov9282->supplies);
> > +}
> > +
> >
> > /**
> >
> > * ov9282_probe() - I2C client device binding
> > * @client: pointer to i2c client device
> >
> > @@ -1022,6 +1055,12 @@ static int ov9282_probe(struct i2c_client *client)
> >
> > return ret;
> >
> > }
> >
> > + ret = ov9282_get_regulators(ov9282);
> > + if (ret) {
> > + dev_err(&client->dev, "Failed to get power
regulators\n");
> > + return ret;
> > + }
> > +
> >
> > mutex_init(&ov9282->mutex);
> >
> > ret = ov9282_power_on(ov9282->dev);
