Hi, this is the 2nd series adding support for OV9281 which is quite similar to OV9282. This includes: * a small cleanup (Patch 1) * adding a new compatible (Patch 2 & 3) * adding support for regulators (Patch 4 & 5) * Fix reading ID register on VC MIPI OV9281 (Patch 6) Thanks for anyone doing review and giving a feedback. Here are the changes in v2: * Added Krzysztof's a-b for Patch 2 & 4 * Added Daniele's a-b for Patch 1 & 3 * Removed additional error message in ov9282_power_off * Renamed function from ov9282_configure_regulators to ov9282_get_regulators * Cleaned-up reading ID registers The regulator support is based on the driver from Raspberry Pi downstream kernel [1], the ID register read fix as well. Please refer to [2] why this fix is required. I can confirm this is necessary by checking with a Logic analyzer on the i2c bus. Best regards, Alexander [1] https://github.com/raspberrypi/linux/blob/rpi-5.15.y/drivers/media/i2c/ov9281.c [2] https://github.com/raspberrypi/linux/commit/58deee7c917e1c3c5e37987c3a89ad19d791f58a Alexander Stein (6): media: i2c: ov9282: remove unused and unset i2c_client member media: dt-bindings: media: Add compatible for ov9281 media: i2c: ov9282: Add ov9281 compatible media: dt-bindings: media: ov9282: Add power supply properties media: i2c: ov9282: Add regulator support media: i2c: ov9282: Fix device detection .../bindings/media/i2c/ovti,ov9282.yaml | 14 ++++- drivers/media/i2c/ov9282.c | 56 ++++++++++++++++++- 2 files changed, 67 insertions(+), 3 deletions(-) -- 2.25.1
