Configure the CSI-2 receiver by inspecting the remote subdev frame_desc.
Configure the link clock rate, field handling and CSI-2 Virtual Channel
and DT filtering using the frame descriptor retrieved from the
transmitter.
This change also makes mandatory for any subdevice that operates with
the R-Car CSI-2 receiver to implement the .get_frame_desc() operation.
[based on a patch from]
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
[rework based on lates multistream support]
Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
---
drivers/media/platform/rcar-vin/rcar-csi2.c | 138 +++++++++++++++-----
1 file changed, 105 insertions(+), 33 deletions(-)
diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index b06af1080b04..39545e631e42 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -70,10 +70,7 @@ struct rcar_csi2;
#define FLD_REG 0x1c
#define FLD_FLD_NUM(n) (((n) & 0xff) << 16)
#define FLD_DET_SEL(n) (((n) & 0x3) << 4)
-#define FLD_FLD_EN4 BIT(3)
-#define FLD_FLD_EN3 BIT(2)
-#define FLD_FLD_EN2 BIT(1)
-#define FLD_FLD_EN BIT(0)
+#define FLD_FLD_EN(n) BIT((n) & 0xf)
/* Automatic Standby Control */
#define ASTBY_REG 0x20
@@ -471,6 +468,17 @@ static const struct rcar_csi2_format *rcsi2_code_to_fmt(unsigned int code)
return NULL;
}
+static const struct rcar_csi2_format *rcsi2_datatype_to_fmt(unsigned int dt)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(rcar_csi2_formats); i++)
+ if (rcar_csi2_formats[i].datatype == dt)
+ return &rcar_csi2_formats[i];
+
+ return NULL;
+}
+
enum rcar_csi2_pads {
RCAR_CSI2_SINK,
RCAR_CSI2_SOURCE_VC0,
@@ -506,7 +514,6 @@ struct rcar_csi2 {
int channel_vc[4];
struct mutex lock; /* Protects mf and stream_count. */
- struct v4l2_mbus_framefmt mf;
int stream_count;
unsigned short lanes;
@@ -555,6 +562,32 @@ static int rcsi2_exit_standby(struct rcar_csi2 *priv)
return 0;
}
+static int rcsi2_get_remote_frame_desc(struct rcar_csi2 *priv,
+ struct v4l2_mbus_frame_desc *fd)
+{
+ struct media_pad *pad;
+ int ret;
+
+ if (!priv->remote)
+ return -ENODEV;
+
+ pad = media_entity_remote_pad(&priv->pads[RCAR_CSI2_SINK]);
+ if (!pad)
+ return -ENODEV;
+
+ ret = v4l2_subdev_call(priv->remote, pad, get_frame_desc,
+ pad->index, fd);
+ if (ret)
+ return ret;
+
+ if (fd->type != V4L2_MBUS_FRAME_DESC_TYPE_CSI2) {
+ dev_err(priv->dev, "Frame desc do not describe CSI-2 link");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int rcsi2_wait_phy_start(struct rcar_csi2 *priv,
unsigned int lanes)
{
@@ -605,11 +638,14 @@ static int rcsi2_set_phypll(struct rcar_csi2 *priv, unsigned int mbps)
return 0;
}
-static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp,
- unsigned int lanes)
+static int rcsi2_calc_mbps(struct rcar_csi2 *priv,
+ struct v4l2_mbus_frame_desc *fd, unsigned int lanes)
{
+ const struct v4l2_mbus_frame_desc_entry_csi2 *csi2_desc;
+ const struct rcar_csi2_format *format;
struct v4l2_subdev *source;
struct v4l2_ctrl *ctrl;
+ unsigned int i;
u64 mbps;
if (!priv->remote)
@@ -625,12 +661,30 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp,
return -EINVAL;
}
+ /* Verify that all remote streams send the same datatype. */
+ csi2_desc = NULL;
+ for (i = 0; i < fd->num_entries; i++) {
+ struct v4l2_mbus_frame_desc_entry_csi2 *stream_desc;
+
+ stream_desc = &fd->entry[i].bus.csi2;
+ if (!csi2_desc)
+ csi2_desc = stream_desc;
+
+ if (csi2_desc->dt != stream_desc->dt) {
+ dev_err(priv->dev,
+ "Remote streams with different DT: %u - %u\n",
+ csi2_desc->dt, stream_desc->dt);
+ return -EINVAL;
+ }
+ }
+ format = rcsi2_datatype_to_fmt(csi2_desc->dt);
+
/*
* Calculate the phypll in mbps.
* link_freq = (pixel_rate * bits_per_sample) / (2 * nr_of_lanes)
* bps = link_freq * 2
*/
- mbps = v4l2_ctrl_g_ctrl_int64(ctrl) * bpp;
+ mbps = v4l2_ctrl_g_ctrl_int64(ctrl) * format->bpp;
do_div(mbps, lanes * 1000000);
return mbps;
@@ -676,54 +730,65 @@ static int rcsi2_get_active_lanes(struct rcar_csi2 *priv,
static int rcsi2_start_receiver(struct rcar_csi2 *priv)
{
- const struct rcar_csi2_format *format;
+ const struct v4l2_subdev_stream_configs *configs;
u32 phycnt, vcdt = 0, vcdt2 = 0, fld = 0;
+ struct v4l2_subdev_state *state;
+ struct v4l2_mbus_frame_desc fd;
unsigned int lanes;
unsigned int i;
int mbps, ret;
- dev_dbg(priv->dev, "Input size (%ux%u%c)\n",
- priv->mf.width, priv->mf.height,
- priv->mf.field == V4L2_FIELD_NONE ? 'p' : 'i');
-
- /* Code is validated in set_fmt. */
- format = rcsi2_code_to_fmt(priv->mf.code);
- if (!format)
- return -EINVAL;
+ /* Get information about multiplexed link. */
+ ret = rcsi2_get_remote_frame_desc(priv, &fd);
+ if (ret)
+ return ret;
- /*
- * Enable all supported CSI-2 channels with virtual channel and
- * data type matching.
- *
- * NOTE: It's not possible to get individual datatype for each
- * source virtual channel. Once this is possible in V4L2
- * it should be used here.
- */
- for (i = 0; i < priv->info->num_channels; i++) {
+ for (i = 0; i < fd.num_entries; i++) {
+ struct v4l2_mbus_frame_desc_entry *entry = &fd.entry[i];
u32 vcdt_part;
if (priv->channel_vc[i] < 0)
continue;
- vcdt_part = VCDT_SEL_VC(priv->channel_vc[i]) | VCDT_VCDTN_EN |
- VCDT_SEL_DTN_ON | VCDT_SEL_DT(format->datatype);
+ vcdt_part = VCDT_SEL_VC(priv->channel_vc[i]) |
+ VCDT_VCDTN_EN | VCDT_SEL_DTN_ON |
+ VCDT_SEL_DT(entry->bus.csi2.dt);
/* Store in correct reg and offset. */
if (i < 2)
vcdt |= vcdt_part << ((i % 2) * 16);
else
vcdt2 |= vcdt_part << ((i % 2) * 16);
+
+ dev_dbg(priv->dev, "channel %u: VC = %d, datatype = 0x%x\n",
+ i, priv->channel_vc[i], entry->bus.csi2.dt);
}
- if (priv->mf.field == V4L2_FIELD_ALTERNATE) {
- fld = FLD_DET_SEL(1) | FLD_FLD_EN4 | FLD_FLD_EN3 | FLD_FLD_EN2
- | FLD_FLD_EN;
+ /*
+ * Configure field handling inspecting the formats of the
+ * sink pad streams.
+ */
+ state = v4l2_subdev_lock_and_get_active_state(&priv->subdev);
+ configs = &state->stream_configs;
+ for (i = 0; i < configs->num_configs; ++i) {
+ const struct v4l2_subdev_stream_config *config = configs->configs;
- if (priv->mf.height == 240)
+ if (config->pad != RCAR_CSI2_SINK)
+ continue;
+
+ if (config->fmt.field != V4L2_FIELD_ALTERNATE)
+ continue;
+
+ fld |= FLD_DET_SEL(1);
+ fld |= FLD_FLD_EN(config->stream);
+
+ /* PAL vs NTSC. */
+ if (config->fmt.height == 240)
fld |= FLD_FLD_NUM(0);
else
fld |= FLD_FLD_NUM(1);
}
+ v4l2_subdev_unlock_state(state);
/*
* Get the number of active data lanes inspecting the remote mbus
@@ -736,7 +801,7 @@ static int rcsi2_start_receiver(struct rcar_csi2 *priv)
phycnt = PHYCNT_ENABLECLK;
phycnt |= (1 << lanes) - 1;
- mbps = rcsi2_calc_mbps(priv, format->bpp, lanes);
+ mbps = rcsi2_calc_mbps(priv, &fd, lanes);
if (mbps < 0)
return mbps;
@@ -1019,6 +1084,13 @@ static int rcsi2_notify_bound(struct v4l2_async_notifier *notifier,
struct rcar_csi2 *priv = notifier_to_csi2(notifier);
int pad;
+ if (!v4l2_subdev_has_op(subdev, pad, get_frame_desc)) {
+ dev_err(priv->dev,
+ "Subdev %s bound failed: missing get_frame_desc()\n",
+ subdev->name);
+ return -EINVAL;
+ }
+
pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
MEDIA_PAD_FL_SOURCE);
if (pad < 0) {
--
2.35.1
