Hello,
this series build up several other branches:
- Tomi's tomba/multistream/work-v11
- Niklas' CHSEL rework:
"media: rcar-{csi2,vin}: Move to full Virtual Channel routing per CSI-2 IP"
The series makes adv748x a fully multiplexed device which can direct the video
stream on different source pad streams which select the virtual channel.
The CSI-2 support was sent already, but this time has been rebased on Niklas'
chsel rework. The CSI-2 is a multiplexed receiver with a fixed routing table
as the routing towards VIN is controlled by link enablement.
Finally VIN needs a little adjustment to support multiplexed transmitters.
v1 -> v2:
- rebased on Tomi's v11
- Modified R-Car CSI-2 VC handling as suggested by Niklas. Now I can capture
all CSI-2 Virtual Channel from every VIN instance freely \o/
Jacopo Mondi (10):
media: adv748x: Add flags to adv748x_subdev_init()
media: adv748x: Add support for v4l2_subdev_state
media: adv748x: Move format to subdev state
media: adv748x: Implement .get_frame_desc()
media: adv748x: Implement set_routing
media: rcar-csi2: Add support for multiplexed streams
media: rcar-csi2: Move format to subdev state
media: rcar-csi2: Config by using the remote frame_desc
media: rcar-csi2: Implement set_routing
media: rcar-vin: Support state-aware transmitters
drivers/media/i2c/adv748x/adv748x-afe.c | 2 +-
drivers/media/i2c/adv748x/adv748x-core.c | 4 +-
drivers/media/i2c/adv748x/adv748x-csi2.c | 265 +++++++++++++++----
drivers/media/i2c/adv748x/adv748x-hdmi.c | 2 +-
drivers/media/i2c/adv748x/adv748x.h | 6 +-
drivers/media/platform/rcar-vin/rcar-csi2.c | 279 ++++++++++++++++----
drivers/media/platform/rcar-vin/rcar-dma.c | 3 +-
7 files changed, 445 insertions(+), 116 deletions(-)
--
2.35.1
