On Wed, Feb 2, 2022 at 7:39 AM Nicolas Dufresne <nicolas@xxxxxxxxxxxx> wrote: > > Le mercredi 02 février 2022 à 05:01 -0600, Adam Ford a écrit : > > On Mon, Jan 31, 2022 at 8:33 AM Adam Ford <aford173@xxxxxxxxx> wrote: > > > > > > On Mon, Jan 31, 2022 at 8:29 AM Nicolas Dufresne <nicolas@xxxxxxxxxxxx> wrote: > > > > > > > > Le vendredi 28 janvier 2022 à 12:43 -0600, Adam Ford a écrit : > > > > > On Fri, Jan 28, 2022 at 12:35 PM Nicolas Dufresne <nicolas@xxxxxxxxxxxx> wrote: > > > > > > > > > > > > Hi Adam, > > > > > > > > > > > > Jernej and I had to deal with user report which show a stride issue with the G2 > > > > > > on Allwinner H6. > > > > > > > > > > > > https://forum.libreelec.tv/thread/17565-nightly-images-for-a64-h3-h5-h6-and-r40-boards/?postID=166086#post166086 > > > > > > > > > > > > We quickly found that the stride alignment set to 16 needs to be 32. Though we > > > > > > noticed that this is only needed when using the G2 postprocessor (NV12), while > > > > > > it worked fine with tiles (NV12_4L4). > > > > > > > > > > Out of curiosity, would it hurt to make the G2 alignment to be 32 even > > > > > if it's not required? > > > > > > > > Aligning tile to 32 can be complex, I don't think the code is ready to handle > > > > padded tiled buffers. About the post-prob, I'd like to first understand why is > > > > this. > > > > > > > > > > > > > > > > > > > > > We were wondering if you, or anyone here on the list could test this on IMX8MQ > > > > > > and IMX8MM. We'd like know if this is specific to the older G2 on H6. To trigger > > > > > > this, you need a video with a resolution like 1552x1080 as used in the report. > > > > > > We can help you get one if needed. > > > > > > > > > > If you have a video you want me to try and instructions on how you > > > > > want me to test it, I can give it a shot. The imx8mm doesn't have a > > > > > video display driver yet, but I think the imx8mq does. I am not as > > > > > familiar with that board as I am with the 8mm. The testing I have > > > > > done to date has only been done with fluster. > > > > > > > > If you have fluster/gstreamer ready, and some display, I suppose you can try and > > > > kmssink (worked for me with the vendor display driver). To get the same video, > > > > you can probably download temporarily that youtube video with youtube-dl, > > > > careful not to share the file, this is copyrighted content, but it ease testing > > > > and debugging, so I suspect it falls in fair use (INAL). > > > > > > > > youtube-dl -f 248 https://www.youtube.com/watch?v=TUVcZfQe-Kw > > > > gst-launch-1.0 filesrc location="Dua Lipa - Levitating Featuring DaBaby (Official Music Video)-TUVcZfQe-Kw.webm" ! parsebin ! v4l2slvp9dec ! videoconvert ! kmssink > > > > > > Sounds good. I have a few tasks to do before I can get back to this, > > > but I'll try to do it later today or tonight. > > > > From what I can see, the HDMI driver for the imx8mq isn't available in > > the kernel, so I cannot get video. The NXP branch which has video > > doesn't have the hantro drivers in question, so this isn't going to be > > an easy task, because I cannot get video out of the imx8mq right now. > > > > On the i.MX8M Mini, it's missing the DSI driver which is the only > > video output supported by the Mini, so I can't get video out of it > > either. The NXP branch has the same limitations. > > > > I could potentially attempt to run the video through the decoder and > > then video convert to some still images or a different video format to > > playback or review on a different device. Let me know your thoughts > > on that. i am downloading the Dua Lipa video now, so I could > > potentially try something when its finished. > > Ok, that would be best you can try indeed, normally running few frames through > software converter and recording as mjpeg could work to reproduce this. Thanks a > lot of this and sorry for the difficulty, let's hope the display driver > situation on these boards get better soon. I ran about 15 seconds of the video through the decoder, then encoded it with the JPEG encoder into an avi. gst-launch-1.0 filesrc location=~/dl.webm ! parsebin ! v4l2slvp9dec ! videoconvert ! jpegenc ! avimux ! filesink location=mjpeg.avi I can send you the AVI if you like, but the output image looked good to me when I played it back on my desktop computer. Please let me know if there is anything else you need me to do. thanks, adam > > > > > adam > > > > > > adam > > > > > > > > regards, > > > > Nicolas > > > > > > > > > > > > > > adam > > > > > > > > > > > > > > > > > regards, > > > > > > Nicolas > > > > >
