Hi All,
Here is a patch series fixing various bugs in the current
atomisp_gmin_platform AXP288 support (it was completely broken before
this series) as well as adding support for devices with front and back
sensors.
This has been tested on a Teclast Tbook11 and a
Trekstor Surftab Duo W1 10.1, both of which use ov2680 sensors as both
there front and back sensors.
I think this should also make things work on the Cyberbook T116,
but I did not get around to testing that yet.
This series also contains some code to try and get things to work on
Bay Trail devices. This at least makes the driver load, but it does
not work yet and actually getting it to work may very well be quite
tricky.
Regards,
Hans
Hans de Goede (9):
media: atomisp: Don't use ifdef on IS_ISP2401
media: atomisp: Don't use ifdef ISP2400
media: atomisp: Use irci_stable_candrpv_0415_20150423_1753 fw for byt
media: atomisp_gmin_platform: Fix axp_regulator_set() writing to the
wrong register
media: atomisp_gmin_platform: Add enable-count to
gmin_[v1p8|v2p8]_ctrl()
media: atomisp_gmin_platform: Set ELDO1 to 1.6V on devices with an
AXP288 PMIC
media: atomisp_gmin_platform: Do not turn ELDO2 off from axp_v1p8_on()
media: atomisp_gmin_platform: Base CsiPort default on detected CLK
media: atomisp_gmin_platform: Add DMI quirk to not turn AXP ELDO2
regulator off on some boards
.../media/atomisp/pci/atomisp_compat_css20.c | 4 +-
.../media/atomisp/pci/atomisp_gmin_platform.c | 148 +++++++++++++-----
.../staging/media/atomisp/pci/atomisp_v4l2.c | 2 +-
.../media/atomisp/pci/sh_css_firmware.c | 4 +
4 files changed, 114 insertions(+), 44 deletions(-)
--
2.33.1
