Hi Adam,
On Sat, Nov 20, 2021 at 12:33:25PM -0600, Adam Ford wrote:
> On Fri, Nov 19, 2021 at 5:51 PM Tim Harvey wrote:
> > On Thu, Nov 11, 2021 at 10:55 PM Jagan Teki wrote:
> > > On Sat, Nov 6, 2021 at 9:24 PM Adam Ford wrote:
> > > >
> > > > Most of the blk-ctrl reset bits are found in one register, however
> > > > there are two bits in offset 8 for pulling the MIPI DPHY out of reset
> > > > and these need to be set when IMX8MM_DISPBLK_PD_MIPI_CSI is brought
> > > > out of reset or the MIPI_CSI hangs.
> > > >
> > > > Fixes: 926e57c065df ("soc: imx: imx8m-blk-ctrl: add DISP blk-ctrl")
> > > > Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
> > > > ---
> > > >
> > > > V2: Make a note that the extra register is only for Mini/Nano DISPLAY_BLK_CTRL
> > > > Rename the new register to mipi_phy_rst_mask
> > > > Encapsulate the edits to this register with an if-statement
> > >
> > > This is DPHY reset mask, not sure we can handle this via blk-ctrl.
> > > Marek has similar patch to support this [1]. we need to phandle the
> > > phy in host node in order to work this.
> > >
> > > However this current patch change seems directly handling dphy reset
> > > which indeed fine me as well.
> > >
> > > >
> > > > drivers/soc/imx/imx8m-blk-ctrl.c | 18 ++++++++++++++++++
> > > > 1 file changed, 18 insertions(+)
> > > >
> > > > diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
> > > > index 519b3651d1d9..581eb4bc7f7d 100644
> > > > --- a/drivers/soc/imx/imx8m-blk-ctrl.c
> > > > +++ b/drivers/soc/imx/imx8m-blk-ctrl.c
> > > > @@ -17,6 +17,7 @@
> > > >
> > > > #define BLK_SFT_RSTN 0x0
> > > > #define BLK_CLK_EN 0x4
> > > > +#define BLK_MIPI_RESET_DIV 0x8 /* Mini/Nano DISPLAY_BLK_CTRL only */
> > > >
> > > > struct imx8m_blk_ctrl_domain;
> > > >
> > > > @@ -36,6 +37,15 @@ struct imx8m_blk_ctrl_domain_data {
> > > > const char *gpc_name;
> > > > u32 rst_mask;
> > > > u32 clk_mask;
> > > > +
> > > > + /*
> > > > + * i.MX8M Mini and Nano have a third DISPLAY_BLK_CTRL register
> > > > + * which is used to control the reset for the MIPI Phy.
> > > > + * Since it's only present in certain circumstances,
> > > > + * an if-statement should be used before setting and clearing this
> > > > + * register.
> > > > + */
> > > > + u32 mipi_phy_rst_mask;
> > >
> > > May be dphy_rst_mask (above comment may not be required, as it
> > > understand directly with commit message).
> > >
> > > > };
> > > >
> > > > #define DOMAIN_MAX_CLKS 3
> > > > @@ -78,6 +88,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
> > > >
> > > > /* put devices into reset */
> > > > regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
> > > > + if (data->mipi_phy_rst_mask)
> > > > + regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
> > > >
> > > > /* enable upstream and blk-ctrl clocks to allow reset to propagate */
> > > > ret = clk_bulk_prepare_enable(data->num_clks, domain->clks);
> > > > @@ -99,6 +111,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
> > > >
> > > > /* release reset */
> > > > regmap_set_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
> > > > + if (data->mipi_phy_rst_mask)
> > > > + regmap_set_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
> > > >
> > > > /* disable upstream clocks */
> > > > clk_bulk_disable_unprepare(data->num_clks, domain->clks);
> > > > @@ -120,6 +134,9 @@ static int imx8m_blk_ctrl_power_off(struct generic_pm_domain *genpd)
> > > > struct imx8m_blk_ctrl *bc = domain->bc;
> > > >
> > > > /* put devices into reset and disable clocks */
> > > > + if (data->mipi_phy_rst_mask)
> > > > + regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
> > > > +
> > > > regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
> > > > regmap_clear_bits(bc->regmap, BLK_CLK_EN, data->clk_mask);
> > > >
> > > > @@ -488,6 +505,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mm_disp_blk_ctl_domain_data[]
> > > > .gpc_name = "mipi-csi",
> > > > .rst_mask = BIT(3) | BIT(4),
> > > > .clk_mask = BIT(10) | BIT(11),
> > > > + .mipi_phy_rst_mask = BIT(16) | BIT(17),
> > >
> > > DPHY has BIT(17) for Master reset and BIT(16) for Slave reset. I think
> > > we just need master reset to enable. I've tested only BIT(17) on
> > > mipi-dsi gpc and it is working.
> > >
> >
> > Jagan,
> >
> > In my testing I had to use BIT(16) | BIT(17) in order to capture via CSI.
>
> Lucas,
>
> Based on this, should I redo the patch but without clearing bits 16
> and 17? It seems like both DSI and CSI need at least bit 17, and CSI
> appears to need both. If we clear them, we risk stomping on one
> peripheral or another. If we need both, in theory, we could drop the
> need for a DPHY driver on the DSI side.
I've tested camera on the i.MX8MM with an NXP BSP v5.4-based kernel.
Register BLK_MIPI_RESET_DIV is set to 0x00030000 by default. The camera
still works if I clear bit 17, and doesn't if I clear bit 16.
--
Regards,
Laurent Pinchart
