Most of the blk-ctrl reset bits are found in one register, however there are two bits in offset 8 for pulling the MIPI DPHY out of reset and these need to be set when IMX8MM_DISPBLK_PD_MIPI_CSI is brought out of reset or the MIPI_CSI hangs. Fixes: 926e57c065df ("soc: imx: imx8m-blk-ctrl: add DISP blk-ctrl") Signed-off-by: Adam Ford <aford173@xxxxxxxxx> --- V2: Make a note that the extra register is only for Mini/Nano DISPLAY_BLK_CTRL Rename the new register to mipi_phy_rst_mask Encapsulate the edits to this register with an if-statement drivers/soc/imx/imx8m-blk-ctrl.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c index 519b3651d1d9..581eb4bc7f7d 100644 --- a/drivers/soc/imx/imx8m-blk-ctrl.c +++ b/drivers/soc/imx/imx8m-blk-ctrl.c @@ -17,6 +17,7 @@ #define BLK_SFT_RSTN 0x0 #define BLK_CLK_EN 0x4 +#define BLK_MIPI_RESET_DIV 0x8 /* Mini/Nano DISPLAY_BLK_CTRL only */ struct imx8m_blk_ctrl_domain; @@ -36,6 +37,15 @@ struct imx8m_blk_ctrl_domain_data { const char *gpc_name; u32 rst_mask; u32 clk_mask; + + /* + * i.MX8M Mini and Nano have a third DISPLAY_BLK_CTRL register + * which is used to control the reset for the MIPI Phy. + * Since it's only present in certain circumstances, + * an if-statement should be used before setting and clearing this + * register. + */ + u32 mipi_phy_rst_mask; }; #define DOMAIN_MAX_CLKS 3 @@ -78,6 +88,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd) /* put devices into reset */ regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask); + if (data->mipi_phy_rst_mask) + regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask); /* enable upstream and blk-ctrl clocks to allow reset to propagate */ ret = clk_bulk_prepare_enable(data->num_clks, domain->clks); @@ -99,6 +111,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd) /* release reset */ regmap_set_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask); + if (data->mipi_phy_rst_mask) + regmap_set_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask); /* disable upstream clocks */ clk_bulk_disable_unprepare(data->num_clks, domain->clks); @@ -120,6 +134,9 @@ static int imx8m_blk_ctrl_power_off(struct generic_pm_domain *genpd) struct imx8m_blk_ctrl *bc = domain->bc; /* put devices into reset and disable clocks */ + if (data->mipi_phy_rst_mask) + regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask); + regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask); regmap_clear_bits(bc->regmap, BLK_CLK_EN, data->clk_mask); @@ -488,6 +505,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mm_disp_blk_ctl_domain_data[] .gpc_name = "mipi-csi", .rst_mask = BIT(3) | BIT(4), .clk_mask = BIT(10) | BIT(11), + .mipi_phy_rst_mask = BIT(16) | BIT(17), }, }; -- 2.32.0