Hi, On Wed, 2021-11-03 at 22:50 +0200, Dafna Hirschfeld wrote: > > On 09.08.21 12:12, Irui Wang (王瑞) wrote: > > Hi Dafna, > > > > > > 2. Always happened issue ? timeout at the beginning or in > > > > processing ? > > > The commands that I run is: > > > > sudo --user=#1000 /usr/local/libexec/chrome-binary- > > > > tests/video_encode_accelerator_tests --gtest_filter=- > > > > *NV12Dmabuf* -->>codec=vp8 > > > > >/usr/local/share/tast/data/chromiumos/tast/local/bundles/cros/ > > > > video/data/tulip2-320x180.yuv --disable_validator > > > > The command sometime succeed but when I run it sequentially > > > > then at some point after few attempts I start to get those > > > > timeout errors. > > > > It seems mean VP8 encoding function OK, but failed sometimes, did > > you have check VENC clock info during encoding: > > > > cat /sys/kernel/debug/clk/clk_summary | grep venc: > > > > venc_sel > it's H.264 clock > > venclt_sel > it's VP8 clock > > > > the enable&prepare count is not 0 during encoding process. > > > > Thanks > > Best Regards > > > > -----邮件原件----- > > 发件人: Dafna Hirschfeld [mailto:dafna.hirschfeld@xxxxxxxxxxxxx] > > 发送时间: 2021年8月9日 16:27 > > 收件人: Irui Wang (王瑞) > > 抄送: Linux Media Mailing List; moderated list:ARM/Mediatek SoC > > support; Enric Balletbo i Serra > > 主题: Re: 答复: [PATCH 4/5] media: mtk-vcodec: Add two error cases upon > > vpu irq handling > > > > > > > > On 09.08.21 09:37, Irui Wang (王瑞) wrote: > > > Hi Dafna, > > > > > > > > I am testing the vp8 encoder on chromeos and at some point > > > > > the encoder interrupts stop arriving so I try to figure out > > > > > why and report any possible error. > > > > > > 1. Log shows wait IRQ timeout ? > > > > Hi, yes, I get timeout when waiting to the encoder interrupt. The > > timeout is on vp8_enc_wait_venc_done > > > > > > > 2. Always happened issue ? timeout at the beginning or in > > > processing ? > > > > The commands that I run is: > > > > sudo --user=#1000 /usr/local/libexec/chrome-binary- > > tests/video_encode_accelerator_tests --gtest_filter=- > > *NV12Dmabuf* --codec=vp8 > > /usr/local/share/tast/data/chromiumos/tast/local/bundles/cros/video > > /data/tulip2-320x180.yuv --disable_validator > > > > The command sometime succeed but when I run it sequentially then at > > some point after few attempts I start to get those timeout errors. > > > > > 3. how about IRQ infos? > > > cat /proc/interrupts | grep vcodec > > > 18002000.vcodec >> it's H.264 encoder > > > 19002000.vcodec >> it's VP8 encoder > > > > > > I was told you have met another H.264 encoding failed before, > > > did you find reasons about that ? > > > > No, > > But since I see that the google meetup uses the vp8 encoder I > > decided to test the vp8 first. > > > > > > [ 81.918747] [MTK_V4L2][ERROR] > > > > mtk_vcodec_wait_for_done_ctx:32: [3] ctx->type=1, cmd=1, > > > > wait_event_interruptible_timeout time=1000ms out 0 0! > > > > [ 81.931392] [MTK_VCODEC][ERROR][3]: h264_encode_frame() > > > > irq_status=0 failed > > > > [ 81.938470] [MTK_V4L2][ERROR] mtk_venc_worker:1219: > > > > venc_if_encode failed=-5 > > Hi, > I test the driver on debian now, I stream several instances of vp8 > and h264 in parallel. > I see that those errors always occur after an iommu page fault: > > [gst-master] root@debian:~/gst-build# [ 5743.206014] mtk-iommu > 10205000.iommu: fault type=0x5 iova=0xac2ff003 pa=0x0 larb=3 port=0 > layer=1 write > [ 5744.204964] [MTK_V4L2][ERROR] mtk_vcodec_wait_for_done_ctx:32: > [2706] ctx->type=1, cmd=1, wait_event_interruptible_timeout > time=1000ms out 0 0! > [ 5744.217849] [MTK_VCODEC][ERROR][2706]: vp8_enc_encode_frame() > irq_status=0 failed > [ 5744.225359] [MTK_V4L2][ERROR] mtk_venc_worker:1243: venc_if_encode > failed=-5 > > I suspect that maybe this is because the iova of the working_buffers > is handed to the vpu in the function vp8_enc_alloc_work_buf: > wb[i].iova = inst->work_bufs[i].dma_addr; > > Maybe the vpu keep writing to those addresses after they are already > unmapped? > > Thanks, > Dafna failed larb=3, it's for h264 encoder, vp8 encoder is larb5, is there any h264 encoding failed at that time? I have no ideas why these errors happened on your platform, but when we got the "iommu: fault", the possible reason is related to power or clock. > > > > > > > > > > > > MT8173 latest VPUD firmware: > > > https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmwar > > > e.git/commit/?id=aaed4a8bf9a77ec68376e8d92fb218d5fdd88b59 > > > > > > > I uses the latest firmware. > > > > Thanks, > > Dafna > > > > > Thanks > > > Best Regards > > > > > > -----邮件原件----- > > > 发件人: Dafna Hirschfeld [mailto:dafna.hirschfeld@xxxxxxxxxxxxx] > > > 发送时间: 2021年8月6日 15:49 > > > 收件人: Irui Wang (王瑞); linux-kernel@xxxxxxxxxxxxxxx; > > > linux-media@xxxxxxxxxxxxxxx; linux-mediatek@xxxxxxxxxxxxxxxxxxx > > > 抄送: dafna3@xxxxxxxxx; tfiga@xxxxxxxxxxxx; Tiffany Lin (林慧珊); > > > eizan@xxxxxxxxxxxx; Maoguang Meng (孟毛广); kernel@xxxxxxxxxxxxx; > > > mchehab@xxxxxxxxxx; hverkuil@xxxxxxxxx; Yunfei Dong (董云飞); Yong > > > Wu > > > (吴勇); hsinyi@xxxxxxxxxxxx; matthias.bgg@xxxxxxxxx; Andrew-CT Chen > > > (陳智迪); acourbot@xxxxxxxxxxxx > > > 主题: Re: [PATCH 4/5] media: mtk-vcodec: Add two error cases upon > > > vpu > > > irq handling > > > > > > > > > > > > On 06.08.21 08:58, Irui Wang (王瑞) wrote: > > > > On Wed, 2021-08-04 at 16:27 +0200, Dafna Hirschfeld wrote: > > > > > 1. Fail if the function mtk_vcodec_fw_map_dm_addr returns ERR > > > > > pointer. > > > > > 2. Fail if the state from the vpu msg is either > > > > > VEN_IPI_MSG_ENC_STATE_ERROR or VEN_IPI_MSG_ENC_STATE_PART > > > > > > > > > > Signed-off-by: Dafna Hirschfeld < > > > > > dafna.hirschfeld@xxxxxxxxxxxxx> > > > > > --- > > > > > drivers/media/platform/mtk-vcodec/venc_vpu_if.c | 8 > > > > > ++++++++ > > > > > 1 file changed, 8 insertions(+) > > > > > > > > > > diff --git a/drivers/media/platform/mtk-vcodec/venc_vpu_if.c > > > > > b/drivers/media/platform/mtk-vcodec/venc_vpu_if.c > > > > > index 32dc844d16f9..234705ba7cd6 100644 > > > > > --- a/drivers/media/platform/mtk-vcodec/venc_vpu_if.c > > > > > +++ b/drivers/media/platform/mtk-vcodec/venc_vpu_if.c > > > > > @@ -17,6 +17,8 @@ static int handle_enc_init_msg(struct > > > > > venc_vpu_inst *vpu, const void *data) > > > > > vpu->vsi = mtk_vcodec_fw_map_dm_addr(vpu->ctx->dev- > > > > > >fw_handler, > > > > > msg->vpu_inst_addr); > > > > > > > > > > +if (IS_ERR(vpu->vsi)) > > > > > +return PTR_ERR(vpu->vsi); > > > > > /* Firmware version field value is unspecified on MT8173. > > > > > */ > > > > > if (vpu->ctx->dev->venc_pdata->chip == MTK_MT8173) > > > > > return 0; > > > > > @@ -42,6 +44,12 @@ static int handle_enc_encode_msg(struct > > > > > venc_vpu_inst *vpu, const void *data) > > > > > vpu->state = msg->state; > > > > > vpu->bs_size = msg->bs_size; > > > > > vpu->is_key_frm = msg->is_key_frm; > > > > > +if (vpu->state == VEN_IPI_MSG_ENC_STATE_ERROR || > > > > > + vpu->state == VEN_IPI_MSG_ENC_STATE_PART) { > > > > > mtk_vcodec_err(vpu, > > > > > +"bad ipi-enc-state: %s", > > > > > + vpu->state == > > > > > VEN_IPI_MSG_ENC_STATE_ERROR ? "ERR" : "PART"); > > > > > +return -EINVAL; > > > > > +} > > > > > > > > Hi Dafna, > > > > > > > > This state check is useless, the enc result will check in > > > > "vpu_enc_ipi_handler". > > > > > > > > > > Hi, thanks for reviewing. I see that the vpu_enc_ipi_handler only > > > test the msg->status and I see that the states are not tested > > > anywhere except of "skip" state in the h264 enc. > > > > > > Can't there be a scenario where msg->status is ok but the state > > > is error? > > > I am testing the vp8 encoder on chromeos and at some point the > > > encoder interrupts stop arriving so I try to figure out why and > > > report any possible error. > > > > > > Thanks, > > > Dafna > > > > > > > Thanks > > > > > > > > > return 0; > > > > > } > > > > > > > > > > > ************* MEDIATEK Confidentiality Notice > > > ******************** The > > > information contained in this e-mail message (including any > > > attachments) may be confidential, proprietary, privileged, or > > > otherwise exempt from disclosure under applicable laws. It is > > > intended > > > to be conveyed only to the designated recipient(s). Any use, > > > dissemination, distribution, printing, retaining or copying of > > > this > > > e-mail (including its > > > attachments) by unintended recipient(s) is strictly prohibited > > > and may > > > be unlawful. If you are not an intended recipient of this e-mail, > > > or > > > believe that you have received this e-mail in error, please > > > notify the > > > sender immediately (by replying to this e-mail), delete any and > > > all > > > copies of this e-mail (including any attachments) from your > > > system, > > > and do not disclose the content of this e-mail to any other > > > person. Thank you! > > >
