Le Mon, Oct 25, 2021 at 02:45:02PM +0200, Hans Verkuil a écrit : > Hi Corentin, > > On 13/10/2021 20:58, Corentin Labbe wrote: > > Hello > > > > The main change of this serie is to fusion all zoran related modules in > > one. > > This fixes the load order problem when everything is built-in. > > > > Regards > > > > Changes since v1: > > - add missing debugfs cleaning > > - clean some remaining module_get/put functions which made impossible to > > remove the zoran module > > - added the two latest patchs > > Something weird is wrong with this series. I have a DC30, but loading this with: > > modprobe zr36067 card=3 > > results in this error message in the kernel log: > > [ 58.645557] zr36067: module is from the staging directory, the quality is unknown, you have been warned. > [ 58.646658] zr36067 0000:03:00.0: Zoran MJPEG board driver version 0.10.1 > [ 58.646793] zr36067 0000:03:00.0: Zoran ZR36057 (rev 1), irq: 18, memory: 0xf4000000 > [ 58.648821] zr36067 0000:03:00.0: Initializing i2c bus... > [ 58.662420] vpx3220 22-0047: vpx3216b found @ 0x8e (DC30[0]) > [ 58.737445] zr36067 0000:03:00.0: Fail to get encoder > > This works before, so why this is now failing is not clear to me. > > It does work with 'card=0', but I really have a DC30. > > If I test with 'card=0' then the rmmod issue is now solved. Everything normal, since card 0 does not have encoder. Could you check that adv7175 is compiled ? I got the same problem with my DC10+ where saa7110 was not compiled. This issue was reproduced randomly and I have no explanation. (kconfig problem ?) Regards
