> -----Original Message----- > From: DebBarma, Tarun Kanti > Sent: Thursday, June 03, 2010 1:44 PM > To: Hiremath, Vaibhav; linux-media@xxxxxxxxxxxxxxx > Cc: mchehab@xxxxxxxxxx; Karicheri, Muralidharan; linux-omap@xxxxxxxxxxxxxxx > Subject: RE: [PATCH-V1 2/2] AM3517: Add VPFE Capture driver support to board > file > > > > -----Original Message----- > > From: Hiremath, Vaibhav > > Sent: Thursday, June 03, 2010 1:41 PM > > To: DebBarma, Tarun Kanti; linux-media@xxxxxxxxxxxxxxx > > Cc: mchehab@xxxxxxxxxx; Karicheri, Muralidharan; linux- > > omap@xxxxxxxxxxxxxxx > > Subject: RE: [PATCH-V1 2/2] AM3517: Add VPFE Capture driver support to > > board file > > > > > > > -----Original Message----- > > > From: DebBarma, Tarun Kanti > > > Sent: Thursday, June 03, 2010 12:49 PM > > > To: Hiremath, Vaibhav; linux-media@xxxxxxxxxxxxxxx > > > Cc: mchehab@xxxxxxxxxx; Karicheri, Muralidharan; linux- > > omap@xxxxxxxxxxxxxxx > > > Subject: RE: [PATCH-V1 2/2] AM3517: Add VPFE Capture driver support to > > board > > > file > > > > > > Vaibhav, > > > > > > > > > > -----Original Message----- > > > > From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap- > > > > owner@xxxxxxxxxxxxxxx] On Behalf Of Hiremath, Vaibhav > > > > Sent: Thursday, June 03, 2010 12:12 PM > > > > To: linux-media@xxxxxxxxxxxxxxx > > > > Cc: mchehab@xxxxxxxxxx; Karicheri, Muralidharan; linux- > > > > omap@xxxxxxxxxxxxxxx; Hiremath, Vaibhav > > > > Subject: [PATCH-V1 2/2] AM3517: Add VPFE Capture driver support to > > board > > > > file > > > > > > > > From: Vaibhav Hiremath <hvaibhav@xxxxxx> > > > > > > > > Also created vpfe master/slave clock aliases, since naming > > > > convention is different in both Davinci and AM3517 devices. > > > > > > > > Signed-off-by: Vaibhav Hiremath <hvaibhav@xxxxxx> > > > > --- > > > > arch/arm/mach-omap2/board-am3517evm.c | 161 > > > > +++++++++++++++++++++++++++++++++ > > > > 1 files changed, 161 insertions(+), 0 deletions(-) > > > > > > > > diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach- > > > > omap2/board-am3517evm.c > > > > index c1c4389..f2ff751 100644 > > > > --- a/arch/arm/mach-omap2/board-am3517evm.c > > > > +++ b/arch/arm/mach-omap2/board-am3517evm.c > > > > @@ -30,15 +30,168 @@ > > > > > > > > #include <plat/board.h> > > > > #include <plat/common.h> > > > > +#include <plat/control.h> > > > > #include <plat/usb.h> > > > > #include <plat/display.h> > > > > > > > > +#include <media/tvp514x.h> > > > > +#include <media/davinci/vpfe_capture.h> > > > > + > > > > #include "mux.h" > > > > > > > > #define LCD_PANEL_PWR 176 > > > > #define LCD_PANEL_BKLIGHT_PWR 182 > > > > #define LCD_PANEL_PWM 181 > > > > > > > > +/* > > > > + * VPFE - Video Decoder interface > > > > + */ > > > > +#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) > > > > + > > > > +/* Inputs available at the TVP5146 */ > > > > +static struct v4l2_input tvp5146_inputs[] = { > > > > + { > > > > + .index = 0, > > > > + .name = "Composite", > > > > + .type = V4L2_INPUT_TYPE_CAMERA, > > > > + .std = TVP514X_STD_ALL, > > > > + }, > > > > + { > > > > + .index = 1, > > > > + .name = "S-Video", > > > > + .type = V4L2_INPUT_TYPE_CAMERA, > > > > + .std = TVP514X_STD_ALL, > > > > + }, > > > > +}; > > > > + > > > > +static struct tvp514x_platform_data tvp5146_pdata = { > > > > + .clk_polarity = 0, > > > > + .hs_polarity = 1, > > > > + .vs_polarity = 1 > > > > +}; > > > > + > > > > +static struct vpfe_route tvp5146_routes[] = { > > > > + { > > > > + .input = INPUT_CVBS_VI1A, > > > > + .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, > > > > + }, > > > > + { > > > > + .input = INPUT_SVIDEO_VI2C_VI1C, > > > > + .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, > > > > + }, > > > > +}; > > > > + > > > > +static struct vpfe_subdev_info vpfe_sub_devs[] = { > > > > + { > > > > + .name = "tvp5146", > > > > + .grp_id = 0, > > > > + .num_inputs = ARRAY_SIZE(tvp5146_inputs), > > > > + .inputs = tvp5146_inputs, > > > > + .routes = tvp5146_routes, > > > > + .can_route = 1, > > > > + .ccdc_if_params = { > > > > + .if_type = VPFE_BT656, > > > > + .hdpol = VPFE_PINPOL_POSITIVE, > > > > + .vdpol = VPFE_PINPOL_POSITIVE, > > > > + }, > > > > + .board_info = { > > > > + I2C_BOARD_INFO("tvp5146", 0x5C), > > > > + .platform_data = &tvp5146_pdata, > > > > + }, > > > > + }, > > > > +}; > > > > + > > > > +static void am3517_evm_clear_vpfe_intr(int vdint) > > > > +{ > > > > + unsigned int vpfe_int_clr; > > > > + > > > > + vpfe_int_clr = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); > > > > + > > > > + switch (vdint) { > > > > + /* VD0 interrrupt */ > > > > + case INT_35XX_CCDC_VD0_IRQ: > > > > + vpfe_int_clr &= ~AM35XX_VPFE_CCDC_VD0_INT_CLR; > > > > + vpfe_int_clr |= AM35XX_VPFE_CCDC_VD0_INT_CLR; > > > > + break; > > > > + /* VD1 interrrupt */ > > > > + case INT_35XX_CCDC_VD1_IRQ: > > > > + vpfe_int_clr &= ~AM35XX_VPFE_CCDC_VD1_INT_CLR; > > > > + vpfe_int_clr |= AM35XX_VPFE_CCDC_VD1_INT_CLR; > > > > + break; > > > > + /* VD2 interrrupt */ > > > > + case INT_35XX_CCDC_VD2_IRQ: > > > > + vpfe_int_clr &= ~AM35XX_VPFE_CCDC_VD2_INT_CLR; > > > > + vpfe_int_clr |= AM35XX_VPFE_CCDC_VD2_INT_CLR; > > > > + break; > > > > + /* Clear all interrrupts */ > > > > + default: > > > > + vpfe_int_clr &= ~(AM35XX_VPFE_CCDC_VD0_INT_CLR | > > > > + AM35XX_VPFE_CCDC_VD1_INT_CLR | > > > > + AM35XX_VPFE_CCDC_VD2_INT_CLR); > > > > + vpfe_int_clr |= (AM35XX_VPFE_CCDC_VD0_INT_CLR | > > > > + AM35XX_VPFE_CCDC_VD1_INT_CLR | > > > > + AM35XX_VPFE_CCDC_VD2_INT_CLR); > > > > + break; > > > > + } > > > > + omap_ctrl_writel(vpfe_int_clr, AM35XX_CONTROL_LVL_INTR_CLEAR); > > > > + vpfe_int_clr = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); > > > > > > Is it necessary to assign to the local variable (vpfe_int_clr)? If not, > > we > > > can reduce the size of this routine by two assembly instructions: > > > One: copying the result to a register > > > Two: pushing the register value to stack > > > > > [Hiremath, Vaibhav] How are you going to achieve this? How are you going > > to define the switch case values here? > > [Tarun] I am only referring to the last statement, outside the switch() > statement. [Hiremath, Vaibhav] Ohhh Ok. It is required; actually the read operation is required to push/reflect the value written to register. In the past we have seen issues like write is not getting reflected immediately leading to spurious interrupts. Thanks, Vaibhav > > > > Also currently this covers only VPFE Capture related interrupts but this > > function may required for other modules which are part of IPSS, like HECC, > > EMAC and USBOTG. > > > > Thanks, > > Vaibhav > > > > > -Tarun > > > > > > > > > > +} > > > > + > > > > +static struct vpfe_config vpfe_cfg = { > > > > + .num_subdevs = ARRAY_SIZE(vpfe_sub_devs), > > > > + .i2c_adapter_id = 3, > > > > + .sub_devs = vpfe_sub_devs, > > > > + .clr_intr = am3517_evm_clear_vpfe_intr, > > > > + .card_name = "AM3517 EVM", > > > > + .ccdc = "DM6446 CCDC", > > > > +}; > > > > + > > > > +static struct resource vpfe_resources[] = { > > > > + { > > > > + .start = INT_35XX_CCDC_VD0_IRQ, > > > > + .end = INT_35XX_CCDC_VD0_IRQ, > > > > + .flags = IORESOURCE_IRQ, > > > > + }, > > > > + { > > > > + .start = INT_35XX_CCDC_VD1_IRQ, > > > > + .end = INT_35XX_CCDC_VD1_IRQ, > > > > + .flags = IORESOURCE_IRQ, > > > > + }, > > > > +}; > > > > + > > > > +static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32); > > > > +static struct platform_device vpfe_capture_dev = { > > > > + .name = CAPTURE_DRV_NAME, > > > > + .id = -1, > > > > + .num_resources = ARRAY_SIZE(vpfe_resources), > > > > + .resource = vpfe_resources, > > > > + .dev = { > > > > + .dma_mask = &vpfe_capture_dma_mask, > > > > + .coherent_dma_mask = DMA_BIT_MASK(32), > > > > + .platform_data = &vpfe_cfg, > > > > + }, > > > > +}; > > > > + > > > > +static struct resource am3517_ccdc_resource[] = { > > > > + /* CCDC Base address */ > > > > + { > > > > + .start = AM35XX_IPSS_VPFE_BASE, > > > > + .end = AM35XX_IPSS_VPFE_BASE + 0xffff, > > > > + .flags = IORESOURCE_MEM, > > > > + }, > > > > +}; > > > > + > > > > +static struct platform_device am3517_ccdc_dev = { > > > > + .name = "dm644x_ccdc", > > > > + .id = -1, > > > > + .num_resources = ARRAY_SIZE(am3517_ccdc_resource), > > > > + .resource = am3517_ccdc_resource, > > > > + .dev = { > > > > + .dma_mask = &vpfe_capture_dma_mask, > > > > + .coherent_dma_mask = DMA_BIT_MASK(32), > > > > + }, > > > > +}; > > > > + > > > > static struct i2c_board_info __initdata am3517evm_i2c_boardinfo[] = { > > > > { > > > > I2C_BOARD_INFO("s35390a", 0x30), > > > > @@ -46,6 +199,7 @@ static struct i2c_board_info __initdata > > > > am3517evm_i2c_boardinfo[] = { > > > > }, > > > > }; > > > > > > > > + > > > > /* > > > > * RTC - S35390A > > > > */ > > > > @@ -261,6 +415,8 @@ static struct omap_board_config_kernel > > > > am3517_evm_config[] __initdata = { > > > > > > > > static struct platform_device *am3517_evm_devices[] __initdata = { > > > > &am3517_evm_dss_device, > > > > + &am3517_ccdc_dev, > > > > + &vpfe_capture_dev, > > > > }; > > > > > > > > static void __init am3517_evm_init_irq(void) > > > > @@ -313,6 +469,11 @@ static void __init am3517_evm_init(void) > > > > > > > > i2c_register_board_info(1, am3517evm_i2c_boardinfo, > > > > ARRAY_SIZE(am3517evm_i2c_boardinfo)); > > > > + > > > > + clk_add_alias("master", "dm644x_ccdc", "master", > > > > + &vpfe_capture_dev.dev); > > > > + clk_add_alias("slave", "dm644x_ccdc", "slave", > > > > + &vpfe_capture_dev.dev); > > > > } > > > > > > > > static void __init am3517_evm_map_io(void) > > > > -- > > > > 1.6.2.4 > > > > > > > > -- > > > > To unsubscribe from this list: send the line "unsubscribe linux-omap" > > in > > > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > > > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
