Vaibhav, > -----Original Message----- > From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap- > owner@xxxxxxxxxxxxxxx] On Behalf Of Hiremath, Vaibhav > Sent: Thursday, June 03, 2010 12:12 PM > To: linux-media@xxxxxxxxxxxxxxx > Cc: mchehab@xxxxxxxxxx; Karicheri, Muralidharan; linux- > omap@xxxxxxxxxxxxxxx; Hiremath, Vaibhav > Subject: [PATCH-V1 2/2] AM3517: Add VPFE Capture driver support to board > file > > From: Vaibhav Hiremath <hvaibhav@xxxxxx> > > Also created vpfe master/slave clock aliases, since naming > convention is different in both Davinci and AM3517 devices. > > Signed-off-by: Vaibhav Hiremath <hvaibhav@xxxxxx> > --- > arch/arm/mach-omap2/board-am3517evm.c | 161 > +++++++++++++++++++++++++++++++++ > 1 files changed, 161 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach- > omap2/board-am3517evm.c > index c1c4389..f2ff751 100644 > --- a/arch/arm/mach-omap2/board-am3517evm.c > +++ b/arch/arm/mach-omap2/board-am3517evm.c > @@ -30,15 +30,168 @@ > > #include <plat/board.h> > #include <plat/common.h> > +#include <plat/control.h> > #include <plat/usb.h> > #include <plat/display.h> > > +#include <media/tvp514x.h> > +#include <media/davinci/vpfe_capture.h> > + > #include "mux.h" > > #define LCD_PANEL_PWR 176 > #define LCD_PANEL_BKLIGHT_PWR 182 > #define LCD_PANEL_PWM 181 > > +/* > + * VPFE - Video Decoder interface > + */ > +#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) > + > +/* Inputs available at the TVP5146 */ > +static struct v4l2_input tvp5146_inputs[] = { > + { > + .index = 0, > + .name = "Composite", > + .type = V4L2_INPUT_TYPE_CAMERA, > + .std = TVP514X_STD_ALL, > + }, > + { > + .index = 1, > + .name = "S-Video", > + .type = V4L2_INPUT_TYPE_CAMERA, > + .std = TVP514X_STD_ALL, > + }, > +}; > + > +static struct tvp514x_platform_data tvp5146_pdata = { > + .clk_polarity = 0, > + .hs_polarity = 1, > + .vs_polarity = 1 > +}; > + > +static struct vpfe_route tvp5146_routes[] = { > + { > + .input = INPUT_CVBS_VI1A, > + .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, > + }, > + { > + .input = INPUT_SVIDEO_VI2C_VI1C, > + .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, > + }, > +}; > + > +static struct vpfe_subdev_info vpfe_sub_devs[] = { > + { > + .name = "tvp5146", > + .grp_id = 0, > + .num_inputs = ARRAY_SIZE(tvp5146_inputs), > + .inputs = tvp5146_inputs, > + .routes = tvp5146_routes, > + .can_route = 1, > + .ccdc_if_params = { > + .if_type = VPFE_BT656, > + .hdpol = VPFE_PINPOL_POSITIVE, > + .vdpol = VPFE_PINPOL_POSITIVE, > + }, > + .board_info = { > + I2C_BOARD_INFO("tvp5146", 0x5C), > + .platform_data = &tvp5146_pdata, > + }, > + }, > +}; > + > +static void am3517_evm_clear_vpfe_intr(int vdint) > +{ > + unsigned int vpfe_int_clr; > + > + vpfe_int_clr = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); > + > + switch (vdint) { > + /* VD0 interrrupt */ > + case INT_35XX_CCDC_VD0_IRQ: > + vpfe_int_clr &= ~AM35XX_VPFE_CCDC_VD0_INT_CLR; > + vpfe_int_clr |= AM35XX_VPFE_CCDC_VD0_INT_CLR; > + break; > + /* VD1 interrrupt */ > + case INT_35XX_CCDC_VD1_IRQ: > + vpfe_int_clr &= ~AM35XX_VPFE_CCDC_VD1_INT_CLR; > + vpfe_int_clr |= AM35XX_VPFE_CCDC_VD1_INT_CLR; > + break; > + /* VD2 interrrupt */ > + case INT_35XX_CCDC_VD2_IRQ: > + vpfe_int_clr &= ~AM35XX_VPFE_CCDC_VD2_INT_CLR; > + vpfe_int_clr |= AM35XX_VPFE_CCDC_VD2_INT_CLR; > + break; > + /* Clear all interrrupts */ > + default: > + vpfe_int_clr &= ~(AM35XX_VPFE_CCDC_VD0_INT_CLR | > + AM35XX_VPFE_CCDC_VD1_INT_CLR | > + AM35XX_VPFE_CCDC_VD2_INT_CLR); > + vpfe_int_clr |= (AM35XX_VPFE_CCDC_VD0_INT_CLR | > + AM35XX_VPFE_CCDC_VD1_INT_CLR | > + AM35XX_VPFE_CCDC_VD2_INT_CLR); > + break; > + } > + omap_ctrl_writel(vpfe_int_clr, AM35XX_CONTROL_LVL_INTR_CLEAR); > + vpfe_int_clr = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); Is it necessary to assign to the local variable (vpfe_int_clr)? If not, we can reduce the size of this routine by two assembly instructions: One: copying the result to a register Two: pushing the register value to stack -Tarun > +} > + > +static struct vpfe_config vpfe_cfg = { > + .num_subdevs = ARRAY_SIZE(vpfe_sub_devs), > + .i2c_adapter_id = 3, > + .sub_devs = vpfe_sub_devs, > + .clr_intr = am3517_evm_clear_vpfe_intr, > + .card_name = "AM3517 EVM", > + .ccdc = "DM6446 CCDC", > +}; > + > +static struct resource vpfe_resources[] = { > + { > + .start = INT_35XX_CCDC_VD0_IRQ, > + .end = INT_35XX_CCDC_VD0_IRQ, > + .flags = IORESOURCE_IRQ, > + }, > + { > + .start = INT_35XX_CCDC_VD1_IRQ, > + .end = INT_35XX_CCDC_VD1_IRQ, > + .flags = IORESOURCE_IRQ, > + }, > +}; > + > +static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32); > +static struct platform_device vpfe_capture_dev = { > + .name = CAPTURE_DRV_NAME, > + .id = -1, > + .num_resources = ARRAY_SIZE(vpfe_resources), > + .resource = vpfe_resources, > + .dev = { > + .dma_mask = &vpfe_capture_dma_mask, > + .coherent_dma_mask = DMA_BIT_MASK(32), > + .platform_data = &vpfe_cfg, > + }, > +}; > + > +static struct resource am3517_ccdc_resource[] = { > + /* CCDC Base address */ > + { > + .start = AM35XX_IPSS_VPFE_BASE, > + .end = AM35XX_IPSS_VPFE_BASE + 0xffff, > + .flags = IORESOURCE_MEM, > + }, > +}; > + > +static struct platform_device am3517_ccdc_dev = { > + .name = "dm644x_ccdc", > + .id = -1, > + .num_resources = ARRAY_SIZE(am3517_ccdc_resource), > + .resource = am3517_ccdc_resource, > + .dev = { > + .dma_mask = &vpfe_capture_dma_mask, > + .coherent_dma_mask = DMA_BIT_MASK(32), > + }, > +}; > + > static struct i2c_board_info __initdata am3517evm_i2c_boardinfo[] = { > { > I2C_BOARD_INFO("s35390a", 0x30), > @@ -46,6 +199,7 @@ static struct i2c_board_info __initdata > am3517evm_i2c_boardinfo[] = { > }, > }; > > + > /* > * RTC - S35390A > */ > @@ -261,6 +415,8 @@ static struct omap_board_config_kernel > am3517_evm_config[] __initdata = { > > static struct platform_device *am3517_evm_devices[] __initdata = { > &am3517_evm_dss_device, > + &am3517_ccdc_dev, > + &vpfe_capture_dev, > }; > > static void __init am3517_evm_init_irq(void) > @@ -313,6 +469,11 @@ static void __init am3517_evm_init(void) > > i2c_register_board_info(1, am3517evm_i2c_boardinfo, > ARRAY_SIZE(am3517evm_i2c_boardinfo)); > + > + clk_add_alias("master", "dm644x_ccdc", "master", > + &vpfe_capture_dev.dev); > + clk_add_alias("slave", "dm644x_ccdc", "slave", > + &vpfe_capture_dev.dev); > } > > static void __init am3517_evm_map_io(void) > -- > 1.6.2.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
