Martin Brown wrote: > I'm trying to get a driver working for this card under Ubuntu Lucid > (10.04). > > I believe the card is based on the SAA7164 so I'm trying the > kernellabs driver. > > Results of modprobe saa7164 are: > > /etc/modprobe.d/options.conf contains: > options saa7164 card=4 > > > kernel: [ 159.091047] saa7164 driver loaded > kernel: [ 159.091102] saa7164 0000:04:00.0: PCI INT A -> GSI 18 > (level, low) -> IRQ 18 > kernel: [ 159.091974] CORE saa7164[0]: subsystem: 107d:6f2c, board: > Hauppauge WinTV-HVR2200 [card=4,insmod option] > kernel: [ 159.091980] saa7164[0]/0: found at 0000:04:00.0, rev: 129, > irq: 18, latency: 0, mmio: 0x93000000 > kernel: [ 159.135163] tveeprom 0-0000: Encountered bad packet header > [00]. Corrupt or not a Hauppauge eeprom. > kernel: [ 159.135168] saa7164[0]: Hauppauge eeprom: model=0 > > That's it. Nothing more. No /dev/dvb/adpator... created. > > When /etc/modprobe.conf has: > options saa7164 card=5 I get: > > kernel: [ 547.123384] saa7164 driver loaded > kernel: [ 547.123435] saa7164 0000:04:00.0: PCI INT A -> GSI 18 > (level, low) -> IRQ 18 > kernel: [ 547.123614] CORE saa7164[0]: subsystem: 107d:6f2c, board: > Hauppauge WinTV-HVR2200 [card=5,insmod option] > kernel: [ 547.123619] saa7164[0]/0: found at 0000:04:00.0, rev: 129, > irq: 18, latency: 0, mmio: 0x93000000 > kernel: [ 547.160228] tveeprom 0-0000: Encountered bad packet header > [ff]. Corrupt or not a Hauppauge eeprom. > kernel: [ 547.160233] saa7164[0]: Hauppauge eeprom: model=0 > kernel: [ 547.207655] tda18271 1-0060: creating new instance > kernel: [ 547.211800] TDA18271HD/C2 detected @ 1-0060 > kernel: [ 547.469221] DVB: registering new adapter (saa7164) > kernel: [ 547.469226] DVB: registering adapter 2 frontend 0 (NXP > TDA10048HN DVB-T)... > > But only one /dev/dvb/adaptor created instead of 2 and I suspect the > tveeprom error is fatal. > > Does anyone have any suggestions? > > Thanks, > Martin > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > Read the topmost note of: http://www.linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers Is your device in any way related to those two iterations of the Hauppauge HVR-2200 model? (http://linuxtv.org/hg/v4l-dvb/file/304cfde05b3f/linux/Documentation/video4linux/CARDLIST.saa7164) -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
