I'm trying to get a driver working for this card under Ubuntu Lucid (10.04).
I believe the card is based on the SAA7164 so I'm trying the kernellabs
driver.
Results of modprobe saa7164 are:
/etc/modprobe.d/options.conf contains:
options saa7164 card=4
kernel: [ 159.091047] saa7164 driver loaded
kernel: [ 159.091102] saa7164 0000:04:00.0: PCI INT A -> GSI 18 (level,
low) -> IRQ 18
kernel: [ 159.091974] CORE saa7164[0]: subsystem: 107d:6f2c, board:
Hauppauge WinTV-HVR2200 [card=4,insmod option]
kernel: [ 159.091980] saa7164[0]/0: found at 0000:04:00.0, rev: 129,
irq: 18, latency: 0, mmio: 0x93000000
kernel: [ 159.135163] tveeprom 0-0000: Encountered bad packet header
[00]. Corrupt or not a Hauppauge eeprom.
kernel: [ 159.135168] saa7164[0]: Hauppauge eeprom: model=0
That's it. Nothing more. No /dev/dvb/adpator... created.
When /etc/modprobe.conf has:
options saa7164 card=5 I get:
kernel: [ 547.123384] saa7164 driver loaded
kernel: [ 547.123435] saa7164 0000:04:00.0: PCI INT A -> GSI 18 (level,
low) -> IRQ 18
kernel: [ 547.123614] CORE saa7164[0]: subsystem: 107d:6f2c, board:
Hauppauge WinTV-HVR2200 [card=5,insmod option]
kernel: [ 547.123619] saa7164[0]/0: found at 0000:04:00.0, rev: 129,
irq: 18, latency: 0, mmio: 0x93000000
kernel: [ 547.160228] tveeprom 0-0000: Encountered bad packet header
[ff]. Corrupt or not a Hauppauge eeprom.
kernel: [ 547.160233] saa7164[0]: Hauppauge eeprom: model=0
kernel: [ 547.207655] tda18271 1-0060: creating new instance
kernel: [ 547.211800] TDA18271HD/C2 detected @ 1-0060
kernel: [ 547.469221] DVB: registering new adapter (saa7164)
kernel: [ 547.469226] DVB: registering adapter 2 frontend 0 (NXP
TDA10048HN DVB-T)...
But only one /dev/dvb/adaptor created instead of 2 and I suspect the
tveeprom error is fatal.
Does anyone have any suggestions?
Thanks,
Martin
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
