On 09.08.21 11:12, Irui Wang (王瑞) wrote:
Hi Dafna,
2. Always happened issue ? timeout at the beginning or in processing ?
The commands that I run is:
sudo --user=#1000 /usr/local/libexec/chrome-binary-tests/video_encode_accelerator_tests --gtest_filter=-*NV12Dmabuf* -->>codec=vp8 >/usr/local/share/tast/data/chromiumos/tast/local/bundles/cros/video/data/tulip2-320x180.yuv --disable_validator
The command sometime succeed but when I run it sequentially then at some point after few attempts I start to get those timeout errors.
It seems mean VP8 encoding function OK, but failed sometimes, did you have check VENC clock info during encoding:
cat /sys/kernel/debug/clk/clk_summary | grep venc:
venc_sel > it's H.264 clock
venclt_sel > it's VP8 clock
the enable&prepare count is not 0 during encoding process.
I see that the values are indeed incremented while streaming.
When timeout occurs it is always in the beginning of the encoding. So upon the first call to vp8_enc_wait_venc_done.
Thanks,
Dafna
Thanks
Best Regards
-----邮件原件-----
发件人: Dafna Hirschfeld [mailto:dafna.hirschfeld@xxxxxxxxxxxxx]
发送时间: 2021年8月9日 16:27
收件人: Irui Wang (王瑞)
抄送: Linux Media Mailing List; moderated list:ARM/Mediatek SoC support; Enric Balletbo i Serra
主题: Re: 答复: [PATCH 4/5] media: mtk-vcodec: Add two error cases upon vpu irq handling
On 09.08.21 09:37, Irui Wang (王瑞) wrote:
Hi Dafna,
I am testing the vp8 encoder on chromeos and at some point the encoder interrupts stop arriving so I try to figure out why and report any possible error.
1. Log shows wait IRQ timeout ?
Hi, yes, I get timeout when waiting to the encoder interrupt. The timeout is on vp8_enc_wait_venc_done
2. Always happened issue ? timeout at the beginning or in processing ?
The commands that I run is:
sudo --user=#1000 /usr/local/libexec/chrome-binary-tests/video_encode_accelerator_tests --gtest_filter=-*NV12Dmabuf* --codec=vp8 /usr/local/share/tast/data/chromiumos/tast/local/bundles/cros/video/data/tulip2-320x180.yuv --disable_validator
The command sometime succeed but when I run it sequentially then at some point after few attempts I start to get those timeout errors.
3. how about IRQ infos?
cat /proc/interrupts | grep vcodec
18002000.vcodec >> it's H.264 encoder
19002000.vcodec >> it's VP8 encoder
I was told you have met another H.264 encoding failed before, did you find reasons about that ?
No,
But since I see that the google meetup uses the vp8 encoder I decided to test the vp8 first.
[ 81.918747] [MTK_V4L2][ERROR] mtk_vcodec_wait_for_done_ctx:32: [3] ctx->type=1, cmd=1, wait_event_interruptible_timeout time=1000ms out 0 0!
[ 81.931392] [MTK_VCODEC][ERROR][3]: h264_encode_frame() irq_status=0 failed
[ 81.938470] [MTK_V4L2][ERROR] mtk_venc_worker:1219: venc_if_encode failed=-5
MT8173 latest VPUD firmware:
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmwar
e.git/commit/?id=aaed4a8bf9a77ec68376e8d92fb218d5fdd88b59
I uses the latest firmware.
Thanks,
Dafna
Thanks
Best Regards
-----邮件原件-----
发件人: Dafna Hirschfeld [mailto:dafna.hirschfeld@xxxxxxxxxxxxx]
发送时间: 2021年8月6日 15:49
收件人: Irui Wang (王瑞); linux-kernel@xxxxxxxxxxxxxxx;
linux-media@xxxxxxxxxxxxxxx; linux-mediatek@xxxxxxxxxxxxxxxxxxx
抄送: dafna3@xxxxxxxxx; tfiga@xxxxxxxxxxxx; Tiffany Lin (林慧珊);
eizan@xxxxxxxxxxxx; Maoguang Meng (孟毛广); kernel@xxxxxxxxxxxxx;
mchehab@xxxxxxxxxx; hverkuil@xxxxxxxxx; Yunfei Dong (董云飞); Yong Wu
(吴勇); hsinyi@xxxxxxxxxxxx; matthias.bgg@xxxxxxxxx; Andrew-CT Chen
(陳智迪); acourbot@xxxxxxxxxxxx
主题: Re: [PATCH 4/5] media: mtk-vcodec: Add two error cases upon vpu
irq handling
On 06.08.21 08:58, Irui Wang (王瑞) wrote:
On Wed, 2021-08-04 at 16:27 +0200, Dafna Hirschfeld wrote:
1. Fail if the function mtk_vcodec_fw_map_dm_addr returns ERR
pointer.
2. Fail if the state from the vpu msg is either
VEN_IPI_MSG_ENC_STATE_ERROR or VEN_IPI_MSG_ENC_STATE_PART
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@xxxxxxxxxxxxx>
---
drivers/media/platform/mtk-vcodec/venc_vpu_if.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/media/platform/mtk-vcodec/venc_vpu_if.c
b/drivers/media/platform/mtk-vcodec/venc_vpu_if.c
index 32dc844d16f9..234705ba7cd6 100644
--- a/drivers/media/platform/mtk-vcodec/venc_vpu_if.c
+++ b/drivers/media/platform/mtk-vcodec/venc_vpu_if.c
@@ -17,6 +17,8 @@ static int handle_enc_init_msg(struct
venc_vpu_inst *vpu, const void *data)
vpu->vsi = mtk_vcodec_fw_map_dm_addr(vpu->ctx->dev->fw_handler,
msg->vpu_inst_addr);
+if (IS_ERR(vpu->vsi))
+return PTR_ERR(vpu->vsi);
/* Firmware version field value is unspecified on MT8173. */
if (vpu->ctx->dev->venc_pdata->chip == MTK_MT8173)
return 0;
@@ -42,6 +44,12 @@ static int handle_enc_encode_msg(struct
venc_vpu_inst *vpu, const void *data)
vpu->state = msg->state;
vpu->bs_size = msg->bs_size;
vpu->is_key_frm = msg->is_key_frm;
+if (vpu->state == VEN_IPI_MSG_ENC_STATE_ERROR ||
+ vpu->state == VEN_IPI_MSG_ENC_STATE_PART) { mtk_vcodec_err(vpu,
+"bad ipi-enc-state: %s",
+ vpu->state ==
VEN_IPI_MSG_ENC_STATE_ERROR ? "ERR" : "PART");
+return -EINVAL;
+}
Hi Dafna,
This state check is useless, the enc result will check in
"vpu_enc_ipi_handler".
Hi, thanks for reviewing. I see that the vpu_enc_ipi_handler only test the msg->status and I see that the states are not tested anywhere except of "skip" state in the h264 enc.
Can't there be a scenario where msg->status is ok but the state is error?
I am testing the vp8 encoder on chromeos and at some point the encoder interrupts stop arriving so I try to figure out why and report any possible error.
Thanks,
Dafna
Thanks
return 0;
}
************* MEDIATEK Confidentiality Notice ******************** The
information contained in this e-mail message (including any
attachments) may be confidential, proprietary, privileged, or
otherwise exempt from disclosure under applicable laws. It is intended
to be conveyed only to the designated recipient(s). Any use,
dissemination, distribution, printing, retaining or copying of this
e-mail (including its
attachments) by unintended recipient(s) is strictly prohibited and may
be unlawful. If you are not an intended recipient of this e-mail, or
believe that you have received this e-mail in error, please notify the
sender immediately (by replying to this e-mail), delete any and all
copies of this e-mail (including any attachments) from your system,
and do not disclose the content of this e-mail to any other person. Thank you!
