Re: [PATCH v7 00/14] media: mtk-vcodec: support for MT8183 decoder

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Tzung-Bi,

I made a PR for this series, but I would like a follow-up patch that fixes this
sparse warning:

SPARSE:mtk-vcodec/mtk_vcodec_dec_stateful.c:615:35: warning: symbol 'mtk_vdec_8173_pdata' was not declared. Should it be static?
SPARSE:mtk-vcodec/mtk_vcodec_dec_stateless.c:346:35: warning: symbol 'mtk_vdec_8183_pdata' was not declared. Should it be static?

mtk_vcodec_dec.h is probably a good header to put the extern declaration.

Regards,

	Hans

On 06/08/2021 06:15, Tzung-Bi Shih wrote:
> This series adds support for the stateless API into mtk-vcodec, by first
> separating the stateful ops into their own source file, and introducing
> a new set of ops suitable for stateless decoding. As such, support for
> stateful decoders should remain completely unaffected.
> 
> This series has been tested with both MT8183 and MT8173. Decoding was
> working for both chips, and in the case of MT8173 no regression has been
> spotted.
> 
> Patches 1-5 fix a few compliance issues with the decoder and encoder, most
> notably by adding support for the START and STOP command for the latter. These
> patches were last up until v4 but have been moved to the beginning so they can
> be applied sooner.
> 
> Patches 6-9 separates the "stateful" part of the driver into its own file and
> add support for the new firmware and pixel format used by MT8183.
> 
> Patches 10-14 add support for H.264 stateless decoding and MT8183.
> 
> Note that a few checkpatch issues have been left unadressed on purpose:
> * Conversion from e.g. uint32_t to u32 can't be done without breaking
>   consistency. This should be done by a driver-wide patch.
> * Some macro warning suggesting parentheses for parameters expanded as struct
>   members, which is obviously not applicable here.
> * Warnings about adding new files without an update the MAINTAINERS, which is
>   irrelevant as the new files are already covered by the existing wildcards.
> 
> Changes since v6:
> (https://patchwork.linuxtv.org/project/linux-media/cover/20210705053258.1614177-1-acourbot@xxxxxxxxxxxx/)
> * Fix errors from 'checkpatch.pl --strict'.
> * Fix missing kerneldoc issue.
> * Fix wrong device minor number reference.
> 
> Changes since v5:
> * Rebased against latest media tree.
> * Applied most suggestions of `checkpatch.pl --strict`. Some proposed fixes were
>   not applied because they would require a larger refactoring (i.e. large-scale
>   type changes) of the code.
> * Applied Reviewed-by and fix suggestions from Tzung-bi.
> * Check for ABORT state in vidioc_encoder_cmd.
> 
> Changes since v4:
> * Reorganized fixup patches first.
> * Select MEDIA_CONTROLLER_REQUEST_API.
> * Properly capitalize MM21's format description string.
> * Reorganize stateless code as suggested by Hans.
> * Fix compilation errors when DEBUG is defined.
> * Merge double-free fixup patch into the patch that introduced the issue.
> 
> Changes since v3:
> * Stop checking that controls are set for every request.
> * Add V4L2_CID_STATELESS_H264_START_CODE control.
> * Stop mapping OUTPUT buffers and getting the NAL type from them, use the
>   nal_ref_idc field instead.
> * Make V4L2_CID_MIN_BUFFERS_FOR_CAPTURE control stateful-only.
> * Set vb2_buffer's field to V4L2_FIELD_NONE in buffer validation hook.
> 
> Changes since v2:
> * Add follow-up patches fixing support for START/STOP commands for the
>   encoder, and stateful decoder.
> 
> Alexandre Courbot (8):
>   media: mtk-vcodec: vdec: use helpers in VIDIOC_(TRY_)DECODER_CMD
>   media: mtk-vcodec: vdec: clamp OUTPUT resolution to hardware limits
>   media: mtk-vcodec: make flush buffer reusable by encoder
>   media: mtk-vcodec: venc: support START and STOP commands
>   media: mtk-vcodec: vdec: handle firmware version field
>   media: mtk-vcodec: support version 2 of decoder firmware ABI
>   media: add Mediatek's MM21 format
>   dt-bindings: media: document mediatek,mt8183-vcodec-dec
> 
> Hirokazu Honda (1):
>   media: mtk-vcodec: vdec: Support H264 profile control
> 
> Yunfei Dong (5):
>   media: mtk-vcodec: vdec: move stateful ops into their own file
>   media: mtk-vcodec: vdec: support stateless API
>   media: mtk-vcodec: vdec: support stateless H.264 decoding
>   media: mtk-vcodec: vdec: add media device if using stateless api
>   media: mtk-vcodec: enable MT8183 decoder
> 
>  .../bindings/media/mediatek-vcodec.txt        |   1 +
>  .../media/v4l/pixfmt-reserved.rst             |   7 +
>  drivers/media/platform/Kconfig                |   3 +
>  drivers/media/platform/mtk-vcodec/Makefile    |   3 +
>  .../platform/mtk-vcodec/mtk_vcodec_dec.c      | 820 +++---------------
>  .../platform/mtk-vcodec/mtk_vcodec_dec.h      |  25 +-
>  .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c  |  68 +-
>  .../mtk-vcodec/mtk_vcodec_dec_stateful.c      | 628 ++++++++++++++
>  .../mtk-vcodec/mtk_vcodec_dec_stateless.c     | 360 ++++++++
>  .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  58 +-
>  .../platform/mtk-vcodec/mtk_vcodec_enc.c      | 140 ++-
>  .../platform/mtk-vcodec/mtk_vcodec_enc_drv.c  |   6 +-
>  .../mtk-vcodec/vdec/vdec_h264_req_if.c        | 774 +++++++++++++++++
>  .../media/platform/mtk-vcodec/vdec_drv_if.c   |   3 +
>  .../media/platform/mtk-vcodec/vdec_drv_if.h   |   1 +
>  .../media/platform/mtk-vcodec/vdec_ipi_msg.h  |  23 +-
>  .../media/platform/mtk-vcodec/vdec_vpu_if.c   |  43 +-
>  .../media/platform/mtk-vcodec/vdec_vpu_if.h   |   5 +
>  drivers/media/v4l2-core/v4l2-ioctl.c          |   1 +
>  include/uapi/linux/videodev2.h                |   1 +
>  20 files changed, 2241 insertions(+), 729 deletions(-)
>  create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
>  create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
>  create mode 100644 drivers/media/platform/mtk-vcodec/vdec/vdec_h264_req_if.c
> 




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux